journal article·2019-07

Hydraulic properties of polyurethane-bound permeable pavement materials considering unsaturated flow

T. Törzs, G. Lu, A.O. Monteiro, D. Wang, J. Grabe, M. Oeser

Publisher page

Abstract

Abstract Constant urban and infrastructural growth leads to increased sealing of areas in municipal areas. This surface sealing results in distortions of the natural water cycle, which again can lead to noticeable changes in the natural ecosystem. To counteract the effects of surface sealing, innovative permeable road structures provide a promising environment-friendly opportunity. An innovative highly permeable road surface material based on alternative binders using polyurethane (PU) to replace the conventionally used bituminous binders has been developed in the course of an ongoing research project. It is intended that the high permeability of the road’s surface material and underlying support layers leads to a quick drainage through the road construction down to the subsoil. The aim of this study is to understand and quantify the relevant hydraulic properties of PU-bound road surface material, i. e. the water retention behaviour and the hydraulic conductivity in saturated and unsaturated states. A predictive model to determine the surface material’s water retention behaviour was used as a first estimation and very low air entry values were observed. Results from laboratory experiments on the material’s saturated hydraulic conductivity as well as the water retention behaviour in the low suction range are presented. Additionally, empirical hydraulic models to describe the retention behaviour and models for the saturated and unsaturated hydraulic conductivities are outlined and applied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Urban Stormwater Management Solutions · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Entwicklung von Deckschichtmaterialien für versickerungsfähige Verkehrsflächenbefestigungen auf Basis alternativer Bindemittel - Teil I: Festigkeit
2. Entwicklung von Deckschichtmaterialien für versickerungsfähige Verkehrsflächenbefestigungen auf Basis alternativer Bindemittel - Teil II: Ansprache der Performance
3. Effects of material composition on mechanical and acoustic performance of poroelastic road surface (pers)10.1016/j.conbuildmat.2016.12.207 ↗
4. Development of a sustainable pervious pavement material using recycled ceramic aggregate and bio-based polyurethane binder
5. Innovative material concepts: Application potentials and characterization of synthetic road pavements
6. Ionescu · 2016
7. Evertz · 2009
8. Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements10.1016/j.conbuildmat.2019.01.051 ↗
9. Poromechanics of freezing materials10.1016/j.jmps.2005.04.001 ↗
10. Measurement of hydraulic properties of unsaturated permeable polyurethane bound asphalt materials
11. Investigations on the water-retention behaviour of water-permeable pavement materials based on innovative binder materials
12. The change of matric suction due to heavy vehicle crossing: Sydney, australia
13. Milatz · 2016
14. Vanapalli · 2009 · 33
15. FGSV, Merkblatt für versickerungsfähige Verkehrsflächen: M VV, FGSV-Verl., Köln, 2013
16. Prisacariu · 2011
17. Fredlund · 1993
18. L.A. Cooley Jr, Permeability of superpave mixtures: Evaluation of field permeameters, National Center for Asphalt Technology, NCAT Report No. 99-1 (1999).
19. Steuerung des Hohlraumgehaltes von Dränasphalt im Hinblick auf die Optimierung seiner bautechnischen Eigenschaften
20. A model to predict the water retention curve from basic geotechnical properties10.1139/t03-054 ↗
21. ASTMD6836-16, Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge, 2016. doi: 10.1520/D6836-16, ASTM International, West Conshohocken, PA.10.1520/D6836-16 ↗
22. Microporous membrane technology for measurement of soil-water characteristic curve
23. Törzs · 2015
24. Settlements in unsaturated granular soils induced by changes in saturation and suction
25. Din · 2012
26. A study of hysteresis models for soil-water characteristic curves10.1139/t05-071 ↗
27. Brooks · 1964
28. A closed-form equation for predicting the hydraulic conductivity of unsaturated soils10.2136/sssaj1980.03615995004400050002x ↗
29. Equations for the soil-water characteristic curve10.1139/t94-061 ↗
30. A new model for predicting the hydraulic conductivity of unsaturated porous media10.1029/WR012i003p00513 ↗
31. Determination of hydraulic conductivity of porous media from grain-size composition
32. Use of porosity to estimate hydraulic properties of volcanic tuffs10.1016/S0309-1708(02)00182-3 ↗
33. Goodbye, hazen; hello, kozeny-carman10.1061/(ASCE)1090-0241(2003)129:11(1054) ↗
34. Hydraulic and mechanical properties of porous cement-stabilised materials for base courses of PICPs10.1080/10298436.2011.565763 ↗
35. DIN 18130-1, Soil – investigation and testing; Determination of the coefficient of water permeability – Part 1: Laboratory tests, 1998-05. Beuth Verlag GmbH, Berlin Germany.
36. A predictive model for the water retention curve10.1139/t97-080 ↗
37. Kovács · 1981