journal article·2019-07

Strengthening concrete using phosphate cement-based fiber-reinforced inorganic composites for improved fire resistance

Zhu Ding, Mu-Rui Xu, Jian-Guo Dai, Bing-Qin Dong, Ming-Jie Zhang, Shu-Xian Hong, Feng Xing

Publisher page

Abstract

Abstract Fiber reinforced polymer (FRP) composites have been widely used for strengthening of concrete structures for many years. A critical concern for the FRP strengthening technology is the fire resistance. In this study, phosphate cement-based fiber-reinforced inorganic polymer (FRiP) composites were used to replace conventional fiber-reinforced polymer (FRP) composites to strengthen concrete beams for improved fire resistance. The performances of FRiP composites, FRiP-to-concrete interfaces and FRiP-strengthened concrete beams were examined both before and after fire exposure. It was demonstrated that the phosphate cement-based FRiP composites can significantly enhance the mechanical strength of the concrete beams. In addition, they exhibit much improved fire resistance as compared to the epoxy-based FRP composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Teng · 2002
2. Experimental investigation of the influence of moisture on the bond behavior of fibre reinforced polymer (FRP) to concrete interfaces10.1061/(ASCE)CC.1943-5614.0000142 ↗
3. Effect of temperature variation on the full-range behavior of FRP-to-concrete bonded joints10.1061/(ASCE)CC.1943-5614.0000296 ↗
4. Analysis of Mode II debonding behavior of fiber-reinforced polymer-to-substrate bonded joints subjected to combined thermal and mechanical loading10.1016/j.engfracmech.2015.02.002 ↗
5. Bond-slip model for FRP laminates externally bonded to concrete at elevated temperature10.1061/(ASCE)CC.1943-5614.0000337 ↗
6. Finite element modeling of insulated FRP-strengthened RC beams exposed to fire10.1061/(ASCE)CC.1943-5614.0000509 ↗
7. Flexural behavior of reinforced concrete beams externally strengthened with CFRP sheets bonded with an inorganic matrix10.1016/j.engstruct.2005.09.011 ↗
8. Comparison between Organic and Inorganic Matrices for RC Beams Strengthened with Carbon Fiber Sheets10.1061/(ASCE)1090-0268(2007)11:5(507) ↗
9. Use of geopolymers for composite external reinforcement of RC members10.1016/j.compositesb.2012.09.019 ↗
10. The effect of high temperature on the performance of CFRP and FRCM confined concrete elements10.1016/j.compositesb.2013.05.016 ↗
11. Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures10.1016/j.engstruct.2011.03.006 ↗
12. Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesives10.1016/j.conbuildmat.2011.06.021 ↗
13. Behaviour of inorganic polymer concrete columns reinforced with basalt FRP bars under eccentric compression: An experimental study10.1016/j.compositesb.2016.08.020 ↗
14. Eco-friendly external strengthening system for existing reinforced concrete beams10.1016/j.compositesb.2016.03.022 ↗
15. Comparative study of different cement-based inorganic pastes towards the development of FRIP strengthening technology10.1061/(ASCE)CC.1943-5614.0000420 ↗
16. Study on an improved phosphate cement binder for the development of fiber-reinforced inorganic polymer composites10.3390/polym6112819 ↗
17. Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder10.1016/j.conbuildmat.2017.12.059 ↗
18. Hydration/dehydration characteristics of struvite and dittmarite pertaining to magnesium ammonium phosphate cement system10.1007/BF01130204 ↗
19. Deicer-scaling resistance of phosphate cement-based binder for rapid repair of concrete10.1016/S0008-8846(01)00651-2 ↗
20. Inhibiting Efflorescence Formation on Fly Ash-based Geopolymer via Silane Surface Modification10.1016/j.cemconcomp.2018.08.013 ↗
21. Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag paste10.1016/j.cemconcomp.2014.11.009 ↗
22. Comparisons glass powder and pulverized fuel ash for improving the water resistance of magnesium oxychloride cement10.1016/j.cemconcomp.2017.11.010 ↗
23. The influence of FeSO4 and KH2PO4 on the performance of magnesium oxychloride cement10.1016/j.conbuildmat.2015.10.186 ↗
24. Conversion of magnesium oxychloride to chlorartinite and resulting increased water resistance10.1016/j.matlet.2017.06.124 ↗
25. Phosphate-based Geopolymer: formation mechanism and thermal stability10.1016/j.matlet.2017.01.022 ↗
26. Role of Soluble Aluminum Species in the Activating Solution for Synthesis of Silico-aluminophosphate Geopolymers10.1016/j.cemconcomp.2018.07.011 ↗
27. Polyphosphate-modified calcium aluminate cement under normal and elevated temperatures: Phase evolution, microstructure, and mechanical properties10.1016/j.ceramint.2017.08.102 ↗
28. Hydration and hardening characteristics of magnesium phosphate cement paste mixed with composite retarder
29. GBT1346-2011Test methods for water requirement of normal consistency, setting time, and soundness of Portland cement.
30. GB/T17671-1999 Method of testing cements – determination of strength.
31. Interface Bond between FRP Sheets and Concrete Substrates: properties, numerical modeling and roles in member behavior10.1002/pse.187 ↗
32. GBT 50081-2002 Standard for test method of mechanical properties of ordinary concrete.
33. Effect of aggregates and water contents on the properties of magnesium phospho-silicate cement10.1016/j.cemconcomp.2004.03.003 ↗
34. Experimental research on alkali-activated slag high temperature resistant inorganic adhesive pasting CFRP sheets on surface of concrete