Experimental and numerical study on tensile behavior of surface modified PVA fiber reinforced strain-hardening cementitious composites (PVA-SHCC)
Source abstract
Abstract
Abstract Strain-hardening cementitious composites (SHCC) are a special class of high-performance fiber reinforced cementitious composites developed with 2% fiber content or lower. In order to promote the wider applications of SHCC in China, the domestic PVA fibers were treated with an oiling agent. The fiber-matrix interfacial properties were tailored to meet the micromechanics-based design requirements for strain-hardening and saturated multiple-cracking. The single fiber pull-out tests were conducted to study the interfacial behavior and tensile test was carried out to analyze the effects of treatment on the composite level. Oiling treatment has shown considerable improvement in modifying the interfacial properties for chemical debonding energy and frictional bond value respectively. In addition, finite element analysis for single fiber pull-out behavior has also showed good agreement with the experimental results. Moreover, the oil treated PVA fiber uniaxial tensile test results demonstrated significant improvement in mechanical performance with satisfactory strain-hardening in comparison with untreated composite. The present study suggests that the surface modified domestic PVA fibers could be feasible to produce cost-effective SHCC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Durability of mechanically loaded engineered cementitious composites under highly alkaline environments10.1016/j.cemconcomp.2007.09.004 ↗
2. The role of flaw size and fiber distribution on tensile ductility of PVA-ECC10.1016/j.compositesb.2013.08.089 ↗
3. Lightweight engineered cementitious composites (ECC)
4. High-early-strength engineered cementitious composites for fast, durable concrete repair-material properties
5. Autogenous healing of engineered cementitious composites under wet-dry cycles10.1016/j.cemconres.2009.01.013 ↗
6. Constitutive rheological control to develop a self-consolidating engineered cementitious composite reinforced with hydrophilic poly (vinyl alcohol) fibers10.1016/S0958-9465(02)00056-2 ↗
7. Design of engineered cementitious composite suitable for wet-mixture shotcreting
8. Self-cleaning engineered cementitious composites10.1016/j.cemconcomp.2015.09.007 ↗
9. Design of green engineered cementitious composites for improved sustainability
10. Study on fiber hybridization effect of engineered cementitious composites with low-and high-modulus polymeric fibers10.1016/j.conbuildmat.2016.02.112 ↗
11. Interfacial bond between reinforcing fibers and calcium sulfoaluminate cements: fiber pullout characteristics
12. Measuring and modifying interface properties of PVA fibers in ECC matrix10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
13. Study on PVA fiber surface modification for strain-hardening cementitious composites (PVA-SHCC)10.1016/j.conbuildmat.2018.11.072 ↗
14. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)
15. Tailoring engineered cementitious composites with local ingredients10.1016/j.conbuildmat.2015.10.146 ↗
16. Influence of local raw materials on the mechanical behaviour and fracture process of PVA-SHCC
17. Caco3 whisker modified engineered cementitious composite with local ingredients10.1016/j.conbuildmat.2017.06.057 ↗
18. Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)10.1016/j.conbuildmat.2014.12.071 ↗
19. Tensile properties of strain-hardening cementitious composites containing polyvinyl-alcohol fibers hybridized with polypropylene fibers10.1007/s11771-018-3716-9 ↗
20. Matrix tailoring of engineered cementitious composites (ECC) with non-oil-coated, low tensile strength PVA fiber10.1016/j.conbuildmat.2017.11.072 ↗
21. Single fibre model composite: interfacial shear strength measurements between reactive polyamide-6 and cellulosic or glass fibres by microdroplet pullout test10.1016/j.compscitech.2017.05.018 ↗
22. Interfacial shear strength of carbon fiber reinforced polyphenylene sulfide measured by the microbond test10.1016/j.polymertesting.2013.03.020 ↗
23. Micromechanical modeling of the microbond test to quantify the interfacial properties of fiber-reinforced composites10.1016/j.ijsolstr.2008.02.021 ↗
24. A methodology to measure the interface shear strength by means of the fiber push-in test10.1016/j.compscitech.2012.08.011 ↗
25. Understanding the mechanical behavior of fiber/matrix interfaces during push-in tests by means of finite element simulations and a cohesive zone model10.1016/j.commatsci.2016.02.009 ↗
26. Carbon nanotube/carbon fiber hybrid multiscale composites10.1063/1.1466880 ↗
27. Simulation and analysis of shape memory alloy fiber reinforced composite based on cohesive zone model10.1016/j.matdes.2012.03.037 ↗
28. Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters10.1016/j.compscitech.2004.07.003 ↗
29. Engineering the fibre-matrix interface in natural-fibre composites
30. Micromechanics of crack bridging in fibre-reinforced concrete10.1007/BF02472808 ↗
31. New micromechanics design theory for pseudo strain hardening cementitious composite
32. Steady-state and multiple cracking of short random fiber composites
33. From micromechanics to structural engineering: The design of cementitious composites for civil engineering applications
34. Multiple cracking sequence and saturation in fiber reinforced cementitious composites10.3151/crt1990.9.2_19 ↗
35. Tailoring of pre-existing flaws in ECC matrix for saturated strain hardening
36. Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites10.1007/BF02473191 ↗
37. Hygral behavior of engineered cementitious composites (ECC)/vergleich der hygrischen eigenschaften von ecc mit beton10.1515/rbm-2003-5791 ↗
38. Engineered cementitious composite (ECC) material, structural, and durability performance
39. C.S. GB175-2007, Common Portland cement, Beijing, PR China.
40. C.S. GB1596-88, Fly ash used in cement and concrete, Beijing, PR China.
41. Tensile behavior of high-strength strain-hardening cement-based composites (HS-SHCC) made with high-performance polyethylene, aramid and PBO fibers10.1016/j.cemconres.2017.04.004 ↗
42. Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks (HPFRCC), concrete engineering series, sub-committee, recommendations for design and construction of HPFRCC, concrete committee
43. A shear-lag model with a cohesive fibrecmatrix interface for analysis of fibre pull-out10.1016/j.mechmat.2015.07.007 ↗
44. Experimental and cohesive finite element investigation of interfacial behavior of CNT fiber-reinforced composites10.1016/j.compositesa.2017.06.033 ↗
45. Multi-scale mechanical performance of high strength-high ductility concrete
46. Wu · 2001
47. Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag10.1016/j.cemconres.2007.04.006 ↗
48. Effects of water/binder ratio on the properties of engineered cementitious composites10.1007/s11595-010-2298-7 ↗
49. On interface property characterization and performance of fiber reinforced cementitious composites
50. Fiber-bridging constitutive law of engineered cementitious composites10.3151/jact.6.181 ↗
51. Engineered cementitious composites with high-volume fly ash
52. Mechanical behaviour of a polyvinyl alcohol fibre reinforced engineered cementitious composite (PVA-ECC) using local ingredients10.1016/j.conbuildmat.2017.02.158 ↗