journal article·2019-08

Evaluating the physical and strength properties of fibre reinforced magnesium phosphate cement mortar considering mass loss

M. Aminul Haque, Bing Chen, Muhammad Riaz Ahmad, Syed Farasat Ali Shah

Publisher page

Abstract

Abstract Fibre reinforced magnesium phosphate cement (FRMPC) composites are drawing attention day by day in the practical applications due to their excellent strength performance. Keeping this issue in mind, this study aimed to add a little contribution on this area by examining the physical and strength properties of FRMPC mortars containing micro-steel fibre (MSF), polyvinyl alcohol fibre (PVA) and basalt fibre (BF). Each fibre content with consecutive four dosages such as 0.6%, 0.8%, 1% and 1.2% of the total quantity of binders and aggregate, were added in the designated combinations. The analyzed results exhibited that porosity, pore degree of saturation, reduction of permeable voids, density and water absorption properties were well improved for adding 0.6% and 0.8% MSF and PVA, and 0.6% BF fibres in the matrices, whereas the rest two selected higher fibre contents made the microstructure of MPC specimens sponginess by forming the substantial quantity of internal pores. Mass loss was recorded about 0.6%−1% for air cured FRMPC samples at 28 d by adopting abrasion test, where the static immersion liquid condition revealed around 1.5% − 3.0%. In addition, air cured samples containing 0.8% MSF showed the highest compressive strength around 54.8 MPa and 82.6 MPa at 1hr and 28 d, respectively than other considered combinations. Moreover, FRMPC syntheses exposed around 10% − 15% strength loss in water environment as compared to air. SEM observations presented the well interfacial closeness of MSF by coating the hydration products that probably enhanced the noteworthy strength quality of MSF-MPC mortars. XRD investigations also corroborated the possible explanation for reducing the strength loss in water regime by presenting the low peaks of struvite minerals, which was happened due to the dissolution of mass that accorded with the experimental results. These findings might show a path for potential use of FRMPC specimens to enhance the durability properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. A comprehensive study of basalt fiber reinforced magnesium phosphate cement incorporating ultrafine fly ash10.1016/j.compositesb.2018.12.065 ↗
2. Mechanical properties of micro-steel fibre reinforced magnesium potassium phosphate cement composite10.1016/j.conbuildmat.2018.07.037 ↗
3. Effect of silica fume and basalt fiber on the mechanical properties and microstructure of magnesium phosphate cement (MPC) mortar10.1016/j.conbuildmat.2018.09.143 ↗
4. Properties of magnesium phosphate cement containing steel slag powder10.1016/j.conbuildmat.2018.11.085 ↗
5. Effect of early hydration temperature on hydration product and strength development of magnesium phosphate cement (MPC)10.1016/j.cemconres.2015.07.005 ↗
6. Mechanical properties of basalt fiber reinforced magnesium phosphate cement composites10.1016/j.conbuildmat.2018.08.044 ↗
7. Properties of a magnesium phosphate cement-based fire-retardant coating containing glass fiber or glass fiber powder10.1016/j.conbuildmat.2017.12.059 ↗
8. Research progresses in magnesium phosphate cement-based materials10.1061/(ASCE)MT.1943-5533.0000971 ↗
9. Experimental and computational investigation of magnesium phosphate cement mortar10.1016/j.conbuildmat.2016.02.200 ↗
10. Experimental study on mechanical properties and fracture toughness of magnesium phosphate cement10.1016/j.conbuildmat.2015.08.012 ↗
11. Mechanical properties of steel fiber-reinforced magnesium phosphate cement mortar
12. Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers10.1016/j.cemconcomp.2016.11.014 ↗
13. Upcycling wood waste into fibre-reinforced magnesium phosphate cement particleboards10.1016/j.conbuildmat.2017.10.107 ↗
14. Recycled nylon fibers as cement mortar reinforcement10.1016/j.conbuildmat.2015.01.075 ↗
15. Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars10.1016/j.conbuildmat.2010.06.080 ↗
16. Fiber-reinforced magnesia-phosphate composites for rapid repair
17. Experimental research on magnesium phosphate cement mortar reinforced by glass fiber10.1016/j.conbuildmat.2018.08.153 ↗
18. Bond between reinforcing steel fibres and magnesium phosphate/calcium aluminate binders10.1016/S0958-9465(00)00006-8 ↗
19. Transition points in steel fibre pull-out tests from magnesium phosphate and accelerated calcium aluminate binders10.1016/S0958-9465(01)00053-1 ↗
20. Reactive powder based concretes: mechanical properties, durability and hybrid use with OPC10.1016/j.cemconres.2008.03.013 ↗
21. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
22. A review on basalt fibre and its composites10.1016/j.compositesb.2014.12.034 ↗
23. Mechanical behaviour of basalt fibre reinforced concrete10.1016/j.conbuildmat.2016.08.009 ↗
24. Mechanical behavior of basalt fibers in a basalt-UP composite10.1016/j.prostr.2016.02.012 ↗
25. Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action10.1016/j.compstruct.2016.06.008 ↗
26. A short review on basalt fiber reinforced polymer composites10.1016/j.compositesb.2014.12.011 ↗
27. Mechanical behaviour of a polyvinyl alcohol fibre reinforced engineered cementitious composite (PVA-ECC) using local ingredients10.1016/j.conbuildmat.2017.02.158 ↗
28. Mechanical properties of geopolymer concrete containing polyvinyl alcohol fiber exposed to high temperature10.1016/j.conbuildmat.2016.09.001 ↗
29. Study on an improved phosphate cement binder for the development of fiber-reinforced inorganic polymer composites10.3390/polym6112819 ↗
30. Effect of polyvinyl alcohol (PVA) fibre on dynamic and material properties of fibre reinforced concrete10.1016/j.conbuildmat.2013.08.035 ↗
31. Investigation of properties and performances of Polyvinyl Alcohol (PVA) fiber-reinforced rubber concrete10.1016/j.conbuildmat.2018.11.002 ↗
32. Study on PVA fiber surface modification for strain-hardening cementitious composites (PVA-SHCC)10.1016/j.conbuildmat.2018.11.072 ↗
33. Effect of curing regime on water resistance of magnesium–potassium phosphate cement10.1016/j.conbuildmat.2017.06.056 ↗
34. Effects of fly ash and quartz sand on water-resistance and salt-resistance of magnesium phosphate cement10.1016/j.conbuildmat.2015.12.154 ↗
35. J. Paceagiu, M. Georgescu, C. Sa, P. Blvd, The Influence of Curing Conditions on the Physical and Mechanical Properties of Magnesia Phosphate Cements, (2008) 135–139.10.37358/RC.08.2.1720 ↗
36. Rapid setting magnesium phosphate cement for quick repair of concrete pavements - characterisation and durability aspects10.1016/0008-8846(93)90090-V ↗
37. Effect of limestone powder on the water stability of magnesium phosphate cement-based materials10.1016/j.conbuildmat.2017.04.207 ↗
38. Properties of magnesium potassium phosphate cement pastes exposed to water curing: a comparison study on the influences of fly ash and metakaolin10.1016/j.conbuildmat.2019.01.134 ↗
39. L. Pu, C. Unluer, Durability of carbonated MgO concrete containing fly ash and ground granulated blast-furnace slag, 192 (2018) 403–415. doi:10.1016/j.conbuildmat.2018.10.121.10.1016/j.conbuildmat.2018.10.121 ↗
40. Evaluating the conventional mixing grades of demolished tiles aggregate concrete and mortar for sustainable use10.1016/j.jclepro.2018.12.202 ↗
41. Dynamic mechanical analysis of cement mortar prepared with recycled cathode ray tube (CRT) glass as fine aggregate10.1016/j.jclepro.2017.11.057 ↗
42. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
43. E.K. Horszczaruk, Hydro-abrasive erosion of high performance fiber-reinforced concrete, 267 (2009) 110–115. doi:10.1016/j.wear.2008.11.010.10.1016/j.wear.2008.11.010 ↗
44. T. Liu, Z. Wang, D. Zou, A. Zhou, J. Du, Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method, Cem. Concr. Res. https://doi.org/10.1016/j.cemconres.2019.05.004.10.1016/j.cemconres.2019.05.004 ↗
45. Deterioration of pastes exposed to leaching, external sulfate attack and the dual actions
46. Utilization of the black tea powder as multifunctional admixture for the hemihydrate gypsum10.1016/j.jclepro.2018.10.304 ↗
47. Bonding properties of amorphous micro-steel fibre-reinforced cementitious composites10.1016/j.compstruct.2013.02.015 ↗
48. Interface bond characterization between fiber and cementitious matrix
49. Effect of triethanolamine hydrochloride on the performance of cement paste10.1016/j.conbuildmat.2018.12.124 ↗
50. Effect of the combination of fly ash and silica fume on water resistance of magnesium-potassium phosphate cement10.1016/j.conbuildmat.2015.12.085 ↗
51. A.S. Wagh, S.Y. Jeong, chemically bonded phosphate ceramics A dissolutio model of formation_Arun S Wagh_Seung Y. Jeong_2003.pdf, 44 (2003) 1838–1844.10.1111/j.1151-2916.2003.tb03569.x ↗