journal article·2019-12

Effects of cementitious grout components on rheological properties

Jie Liu, Yi Li, Guijin Zhang, Yaning Liu

Publisher page

Abstract

Abstract The impacts of rheological properties of cementitious grouts on the quality of curtain and consolidation grouting cannot be ignored. A series of experiments are carried out to investigate the effects of the components of cementitious grouts on the rheological properties. Moreover, the rheological mechanism and applicable formations of the slurries are discussed. The results show that the rheological properties of clay-cement slurry (CCS) are related to the water/solid ratio and clay dosage. Using CCS to form grouting curtain in strata with large porosity can solve the problem of slurry leakage and dramatically reduce costs. The rheological properties of clay-cement pasty slurry (CCPS) are mainly related to the modifier dosage. With the increase of modifier dosage, the rheological phenomenon of the CCPS shifts from rheopexy to thixotropy. The fact that CCPS has a strong scouring resistance makes it applicable in strata that are rushed by dynamic water. The rheological properties of clay-cement-sand pasty slurry (CCSPS) are related to the sand/cement ratio and modifier dosage. Adding sand can remarkably increase the initial yield stress and viscosity. CCSPS can be the optimal grouting material for impervious grouting in strata where there is a high consumption of slurry or high velocity of groundwater flow.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Geotechnical Engineering and Underground Structures · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Construction measures to prevent hazards in karst cave ground under soft sand strata10.3208/jgssp.CPN-09 ↗
2. A factorial experimental approach for effective dosage rate of stabilizer: an application for fine-grained soil treated with bottom ash10.1016/j.sandf.2014.04.017 ↗
3. A numerical procedure for modeling the seepage field of water-sealed underground oil and gas storage caverns10.1016/j.tust.2017.04.002 ↗
4. A pasty clay-cement grouting material for soft and loose ground under groundwater conditions
5. Influence of maximum applied shear rate on the measured rheological properties of flowable cement pastes10.1016/j.cemconres.2018.12.003 ↗
6. On the influence of face pressure, grouting pressure and TBM design in soft ground tunnelling10.1016/j.tust.2005.06.006 ↗
7. Discussion: soil consolidation associated with grouting during shield tunnelling in soft clayey ground10.1680/geot.2003.53.4.447 ↗
8. Effect of grout pressure and grout flow on soil physical and mechanical properties in jet grouting operations10.1016/j.ijrmms.2008.10.005 ↗
9. Fluorescent tracer tests for detection of dam leakages: the case of the Bumbuna dam – Sierra Leone10.1016/j.enggeo.2016.02.010 ↗
10. A field trial of horizontal jet grouting using the composite-pipe method in the soft deposits of Shanghai10.1016/j.tust.2013.01.003 ↗
11. Performance of fine-grained soil treated with industrial wastewater sludge10.1007/s12665-012-2167-0 ↗
12. Treatment of the seepage problems at the Kalecik Dam (Turkey)10.1016/S0013-7952(02)00225-9 ↗
13. Fracture dilation during grouting10.1016/j.tust.2008.05.004 ↗
14. Analyses of seepage problems in a subsea tunnel considering effects of grouting and lining structure10.1080/1064119X.2014.958882 ↗
15. Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials10.1016/j.conbuildmat.2018.11.257 ↗
16. RSM-based modeling and optimization of self-consolidating mortar to predict acceptable ranges of rheological properties10.1016/j.conbuildmat.2018.09.019 ↗
17. Cementitious grouts with adapted rheological properties for injection by vacuum techniques10.1016/j.cemconres.2014.01.021 ↗
18. Effects of water reducing admixture on rheological properties, fiber distribution, and mechanical behavior of UHPFRC10.3390/app9010029 ↗
19. Unconfined compressive strength and freeze-thaw resistance of fine-grained soil stabilised with bottom ash, lime and superplasticiser10.1080/14680629.2015.1021369 ↗
20. Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier10.1016/S0008-8846(03)00214-X ↗
21. Geo-institute, proper grout rheology assures quality work
22. Influence of cement grouts composition on the rheological behaviour10.1016/j.cemconres.2010.11.015 ↗
23. Yield stress of cement grouts10.1016/j.tust.2016.09.009 ↗
24. Hydration process and rheological properties of cementitious grouting material10.1016/j.conbuildmat.2017.01.111 ↗
25. A new methodology for characterizing segregation of cement grouts during rheological tests10.1016/j.conbuildmat.2015.08.008 ↗
26. Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste10.1016/S0008-8846(03)00233-3 ↗
27. On the rheology of using geopolymer for grouting: a comparative study with cement-based grout included fly ash and cold bonded fly ash10.1016/j.conbuildmat.2018.11.140 ↗
28. Influence of clays on the rheology of cement pastes10.1016/j.cemconres.2009.11.001 ↗
29. Performance evaluation of modified cement-sodium silicate grouting material for prereinforcing loose deposit tunnels10.1061/(ASCE)MT.1943-5533.0002747 ↗
30. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Common portland cement. GB175-2007, China Standards Press, Beijing 2007.
31. Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground10.1016/j.conbuildmat.2018.07.054 ↗
32. General Administration of Quality Supervision · 2008
33. Brookfield Engineering Laboratories, Inc · 2005
34. Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture10.1016/j.conbuildmat.2012.07.102 ↗
35. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
36. National Energy Administration · 2012
37. Yang · 2010
38. Interface between cement paste and quartz sand in alkali-activated slag mortars10.1016/S0008-8846(98)00050-7 ↗
39. Effect of different sand grading on strength properties of cement grout, construction and10.1016/j.conbuildmat.2012.08.030 ↗
40. On the viscous behavior of cement mixtures with clay, sand, lime and bottom ash for jet grouting10.1016/j.conbuildmat.2015.05.072 ↗
41. Experimental study and engineering application of anti-washout properties of underwater karst grout
42. A new prediction method to rheological behavior of grout with bottom ash for jet grouting columns10.1016/j.sandf.2017.05.006 ↗
43. Use of cement based grout with glass powder for deep mixing10.1016/j.conbuildmat.2017.01.070 ↗
44. Clay dosage and water/cement ratio of clay-cement grout for optimal engineering performance10.1016/j.clay.2018.07.035 ↗
45. Viscoelastic properties of fresh cement paste to studythe flow behavior10.1007/s40069-016-0158-3 ↗
46. Study of cement-grout penetration into fractures under static and oscillatory conditions10.1016/j.tust.2014.08.003 ↗
47. Steering parameters for rock grouting10.1155/2013/269594 ↗
48. Comparison of rheological models for jet grout cement mixtures with various stabilizers10.1016/j.conbuildmat.2016.09.129 ↗
49. In-situmeasurement of viscoelastic properties of fresh cement paste by a microrheology analyzer10.1016/j.cemconres.2015.09.020 ↗
50. Thixotropy-a review10.1016/S0377-0257(97)00004-9 ↗
51. Rheological properties of cement pastes: a discussion of structure formation and mechanical property development10.1016/j.cemconres.2008.06.008 ↗
52. Rheological properties of cement paste: thixotropic behavior and structural breakdown10.1016/j.cemconres.2008.10.001 ↗
53. Surface chemistry-rheology relationships in concentrated mineral suspensions10.1016/S0301-7516(99)00041-1 ↗
54. Tattersall · 1983
55. The rheological behavior of fresh cement pastes10.1016/0008-8846(88)90067-1 ↗
56. Effect of colloidal polymers with different surface properties on the rheological property of fresh cement pastes10.1016/j.colsurfa.2017.01.067 ↗
57. A novel approach to prediction of rheological characteristics of jet grout cement mixtures via genetic expression programming10.1007/s00521-016-2360-2 ↗
58. Effect of particle morphological parameters on sand grains packing properties and rheology of model mortars10.1016/j.cemconres.2015.11.002 ↗
59. Effect of fine aggregate characteristics on the thresholds of self-compacting paste rheological properties10.1016/j.conbuildmat.2016.04.069 ↗
60. Suitability of static yield stress evolution to assess thixotropy of flowable cementitious materials
61. Nonveiller · 2013
62. Kinetics of the hydration of tricalcium silicate10.1111/j.1151-2916.1974.tb11400.x ↗
63. A conduction calorimetric study of early hydration of ordinary Portland cement/high alumina cement pastes10.1023/A:1018600412638 ↗
64. Nanomaterials and nanotechnology for high-performance cement composites
65. Constraints on cement-clay interaction10.1016/j.proeps.2013.03.005 ↗
66. An improved hyperbola rheological model for fresh cement-clay grouts10.1016/S0886-7798(01)00062-1 ↗
67. Cement and clay grouting of foundations: practice of the corps of engineers10.1061/JSFEAQ.0000099 ↗
68. Bowen · 1981
69. Hydration and mechanical properties of limestone calcined clay cement produced with marble dust10.1007/978-94-024-1207-9_40 ↗
70. High-density bentonite slurry for seepage barriers10.1061/(ASCE)0899-1561(2005)17:2(178) ↗
71. Testing and applied research on grouting materials on karst tunnel water inrush
72. Application of controlled grouting to project of anti-seepage of river-bend at Tuokou Hydropower Station
73. Monitoring the thixotropic effect in water-clay slurry systems used as a binder for moulding sands