Textile-to-mortar bond behaviour in lime-based textile reinforced mortars
Source abstract
Abstract
Lime-based textile-reinforced mortars (TRM) have recently found a growing interest for repair and strengthening of masonry and historical structures. Despite extensive experimental and numerical investigations performed in the last years on the performance of these composites, there is still a lack of fundamental understanding of the fabric-to-mortar bond behaviour (as one of the main mechanisms affecting the cracking and nonlinear response of these composites) and the parameters affecting that. This paper, aimed at addressing this gap, presents a comprehensive experimental and analytical investigation on how the test setup, embedded length, load rate, mortar age and fabric configuration affect the bond behaviour in lime-based TRMs. In total 160 pull-out tests are performed on a glass-based and a steel-based TRM commonly used for strengthening of masonry structures. The results contribute to standardization of the test procedures for characterization of the fabric-to-mortar bond behaviour, to fundamental understanding of this mechanism and to optimization of the design of these composites for enhancing their mechanical response.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Medieval Architecture and Archaeology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Multi-level characterization of steel reinforced mortars for strengthening of masonry structures10.1016/j.matdes.2016.08.034 ↗
2. Glass fabric reinforced cementitious matrix: tensile properties and bond performance on masonry substrate10.1016/j.compositesb.2017.06.028 ↗
3. Experimental analysis on tensile and bond properties of PBO and aramid fabric reinforced cementitious matrix for strengthening masonry structures10.1016/j.compositesb.2017.05.048 ↗
4. Round robin test on tensile and bond behaviour of steel reinforced grout systems10.1016/j.compositesb.2017.03.052 ↗
5. Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading10.1617/s11527-006-9207-8 ↗
6. Textile reinforced mortars (TRM) versus fiber reinforced polymers (FRP) as strengthening materials of concrete structures
7. Bond-strength performance of hydraulic lime and natural cement mortared sandstone masonry10.1016/j.conbuildmat.2015.03.016 ↗
8. Effect of curing conditions on the properties of lime, lime–metakaolin and lime–zeolite mortars10.1016/j.conbuildmat.2015.10.128 ↗
9. Mechanical properties of masonry repair dolomitic lime-based mortars10.1016/j.cemconres.2005.10.004 ↗
10. RILEM TC 203-RHM: performance requirements for renders and plasters10.1617/s11527-012-9916-0 ↗
11. Influence of an impregnation treatment on the morphology and mechanical behaviour of flax yarns embedded in hydraulic lime mortar10.3390/fib7040030 ↗
12. Mobasher · 2012
13. Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tension10.1016/j.compositesb.2013.06.043 ↗
14. A. Formisano, E.J. Dessì, R. Landolfo, Mechanical-physical experimental tests on lime mortars and bricks reinforced with hemp, in: Int. Conf. Comput. Methods Sci. Eng. 2017, ICCMSE 2017, Greece, 2017. doi:10.1063/1.5012363.10.1063/1.5012363 ↗
15. Static and fatigue performance of FRCM-strengthened concrete beams10.1061/(ASCE)CC.1943-5614.0000868 ↗
16. Bond behavior of SRG-strengthened masonry units: Testing and numerical modeling10.1016/j.conbuildmat.2014.04.070 ↗
17. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
18. Investigation of bond behavior of polyparaphenylene benzobisoxazole fiber-reinforced cementitious matrix composite-concrete interface
19. Effect of test setup on the fiber-to-mortar pullout response in TRM composites: experimental and analytical modeling10.1016/j.compositesb.2018.02.010 ↗
20. Fiber-to-mortar bond behavior in TRM composites: effect of embedded length and fiber configuration10.1016/j.compositesb.2018.06.014 ↗
21. ASTM C109/C109M-05, Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or [50-mm] Cube Specimens), 2005. doi:10.1520/C0109_C0109M-05.10.1520/C0109_C0109M-05 ↗
22. BS EN 1015-11, Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar, 1999.
23. Pullout behavior of steel fibers from cement-based composites10.1016/S0008-8846(97)00061-6 ↗
24. Pullout-slip response of fabrics embedded in a cement paste matrix10.1061/(ASCE)0899-1561(2007)19:9(718) ↗
25. Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars10.1016/j.conbuildmat.2015.12.145 ↗
26. Local bond performance of rebar embedded in steel-polypropylene hybrid fiber reinforced concrete under monotonic and cyclic loading10.1016/j.conbuildmat.2015.11.040 ↗
27. An incremental inverse analysis procedure for identification of bond-slip laws in composites applied to textile reinforced concrete10.1016/j.compositesb.2017.11.014 ↗
28. Bond of a strand in a cementitious matrix10.1617/s11527-006-9115-y ↗
29. Interfacial debonding and fibre pull-out stresses10.1007/BF00349945 ↗
30. Analytical simulation of pull-out tests- the direct problem10.1016/j.cemconcomp.2004.01.006 ↗
31. Analytical evaluation of pull-out tests-The inverse problem10.1016/j.cemconcomp.2006.02.015 ↗
32. Pull-out behaviour of hooked steel fibres10.1007/BF02483148 ↗
33. Experimental investigations on the durability of fibre-matrix interfaces in textile-reinforced concrete10.1016/j.cemconcomp.2009.02.005 ↗
34. Fiber-bridging constitutive law of engineered cementitious composites10.3151/jact.6.181 ↗
35. Crack bridging in fiber reinforced cementitious composites with slip-hardening interfaces10.1016/S0022-5096(96)00095-6 ↗
36. Pull-out of textile reinforcement in concrete10.1016/j.conbuildmat.2014.08.014 ↗
37. Pull-out behavior of single steel fiber from SIFCON matrix10.1016/j.conbuildmat.2012.04.110 ↗
38. Pull-out behaviour and interface critical parameters of polyolefin fibres embedded in mortar and self-compacting concrete matrixes10.1016/j.conbuildmat.2016.02.128 ↗
39. Study on the mechanical property of textile reinforced self-stressing concrete sheets10.1016/j.conbuildmat.2015.12.167 ↗
40. Failure behaviour investigation of continuous yarn reinforced cementitious composites10.1016/j.conbuildmat.2013.05.022 ↗
41. A new pull-out test to study the bond behavior of fiber reinforced cementitious composites10.4028/www.scientific.net/KEM.747.258 ↗
42. Interfacial property tailoring for pseudo strain- hardening cementitious composites