journal article·2020-01

Constructing a novel nano-TiO2/Epoxy resin composite and its application in alkali-activated slag/fly ash pastes

Jie Ren, Si-Yao Guo, Tie-Jun Zhao, Ji-Zhou Chen, Rackel San Nicolas, Lihai Zhang

Publisher page

Abstract

Abstract A novel in-situ synthetic method is developed for fabrication of inorganic-organic hybrid structured TiO2/Epoxy resin composite without adding any surfactants. It is discovered for the first time that the inorganic-organic micro-structured TiO2/Epoxy composite can be homogeneously dispersed in one type of alkali-activated binders: alkali-activated slag/fly ash (AASF) pastes with slag/fly ash at 50/50. Besides, it is found that TiO2/Epoxy composite is capable of enhancing the mechanical properties including compressive and flexural bending strengths, improving porous structures and reducing drying shrinkage of the AASF paste. Moreover, scanning electron microscopy results showed that the AASF binder enhanced by TiO2/Epoxy resin composite has a smooth and flat morphology with fewer cracks as compared to the control paste, leading to a denser microstructure. It is assumed that both TiO2 and epoxy resin are beneficial in improving the microstructure and hence the macroscopic properties of AASF binders were also improved. Since the preparation of TiO2/Epoxy composite through in-situ polymerization method is attractive because of its simple manufacturing procedure and cost-effectiveness, its modified AASF binders have an appealing potential to be used for large-scale production and field applications in the foreseeable future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. I. WBCSD, Cement Technology Roadmap 2009: carbon emissions reductions up to 2050. World Business Council for Sustainable Development and International Energy Agency. , 2009.
2. Hendricks · 1999
3. Application of a system dynamics approach for assessment and mitigation of CO2 emissions from the cement industry10.1016/j.jenvman.2005.08.007 ↗
4. Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer10.1016/j.compositesb.2017.10.013 ↗
5. Effect of source materials on geopolymerization10.1021/ie0206958 ↗
6. Novel hybrid organic-geopolymer materials10.1016/j.clay.2012.11.001 ↗
7. The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash-based geopolymers10.1016/j.cemconres.2009.10.010 ↗
8. Geopolymer, green chemistry and sustainable development solutions
9. Nitric acid attack on hardened paste of geopolymeric cements, Part 1
10. Sulfuric acid attack on hardened paste of geopolymer cements-part 2. Corrosion mechanism at mild and relatively low concentrations
11. Synthesis and heavy metal immobilization behaviors of slag based geopolymer10.1016/j.jhazmat.2006.09.033 ↗
12. The potential use of geopolymeric materials to immobilise toxic metals: Part I. Theory and applications10.1016/S0892-6875(97)00046-0 ↗
13. Provis · 2009
14. Effects of temperature on the hydration characteristics of free lime10.1016/S0008-8846(02)00714-7 ↗
15. Alternation of traditional cement mortars using fly ash-based geopolymer mortars modified by slag10.1016/j.jclepro.2018.08.255 ↗
16. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
17. Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes10.1016/j.conbuildmat.2013.07.106 ↗
18. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
19. Reactivity and reaction products of alkali-activated, fly ash/slag paste10.1016/j.conbuildmat.2015.02.022 ↗
20. Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages10.1016/j.cemconcomp.2014.07.007 ↗
21. Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate10.1016/j.compositesb.2018.11.067 ↗
22. A novel method for preparation of organic resins reinforced geopolymer composites10.1007/s10853-009-4063-x ↗
23. Preparation and mechanical properties of polypropylene fiber reinforced calcined kaolin-fly ash based geopolymer10.1007/s11771-009-0008-4 ↗
24. Novel modification method for inorganic geopolymer by using water soluble organic polymers10.1016/j.matlet.2003.07.051 ↗
25. Fracture toughness of geopolymeric concretes reinforced with basalt fibers10.1016/j.cemconcomp.2004.02.044 ↗
26. Characterizations of flax fabric reinforced nanoclay-geopolymer composites10.1016/j.compositesb.2016.04.007 ↗
27. Low-temperature fabrication of SiC/geopolymer cellular composites10.1016/j.compositesb.2017.11.013 ↗
28. Preparation and characterization of fire retardant straw/magnesium cement composites with an organic-inorganic network structure10.1016/j.conbuildmat.2018.03.111 ↗
29. Preparation and characterization of new geopolymer-epoxy resin hybrid mortars10.3390/ma6072989 ↗
30. Mechanism behind the improvement of coupling agent in interface bonding performance between organic transparent resin and inorganic cement matrix10.1016/j.conbuildmat.2017.03.072 ↗
31. Organic–inorganic perovskites: structural versatility for functional materials design10.1021/acs.chemrev.5b00715 ↗
32. Synthesis and thermal behavior of inorganic–organic hybrid geopolymer composites10.1002/app.21413 ↗
33. Thermal and viscoelastic property of epoxy–clay and hybrid inorganic–organic epoxy nanocomposites10.1002/(SICI)1097-4628(19990906)73:10<1993::AID-APP18>3.0.CO;2-Q ↗
34. Improving mechanical and thermal properties of TiO2-epoxy nanocomposite10.1016/j.compositesb.2016.04.080 ↗
35. Synthesis and properties of epoxy/TiO2 composite materials10.1002/pc.20173 ↗
36. Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters10.1016/j.matdes.2014.05.015 ↗
37. Effect of TiO2 nanoparticles on mechanical properties of epoxy-resin system
38. Impact of curing temperatures and alkaline activators on compressive strength and porosity of ternary blended geopolymer mortars. Case Studies
39. Resistance of geopolymer and Portland cement based systems to silage effluent attack10.1016/j.cemconres.2016.11.015 ↗
40. Research on adaptability of slag-based geopolymer with superplasticizer
41. Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer10.1016/j.matdes.2014.01.064 ↗
42. C.A. ASTM C1437-15 Standard Test Method for Flow of Hydraulic Cement Mortar. Annual book of ASTM standards, 2015, vol. 4.
43. Mix design for self-compacting concrete
44. A. ASTM, C109/C109M-Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or (50-mm) Cube Specimens); 2013. 2. Scope of work shall include but not be limited to the following:-Suspended metal grid for acoustical tile ceiling system, 1999.
45. J.T. Committee, AS 1012.11-2000 (R2014) Methods of testing concrete Determination of the modulus of rupture. Australian Standard (AS), Joint Technical Committee BD-042, Australia, 2000.
46. Improving flexural strength and toughness of geopolymer mortars through additively manufactured metallic rebars10.1016/j.compositesb.2018.03.017 ↗
47. C. ASTM, 642, Standard test method for density, absorption, and voids in hardened concrete. Annual book of ASTM standards, 2006, Vol. 4.
48. Drying-induced changes in the structure of alkali-activated pastes10.1007/s10853-013-7152-9 ↗
49. Performance of alkali-activated slag mortars exposed to acids10.1080/21650373.2012.747235 ↗
50. ASTM 1585-04 · 2004
51. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
52. Drying shrinkage of slag blended fly ash geopolymer concrete cured at room temperature10.1016/j.proeng.2015.11.066 ↗
53. C. ASTM, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete. C157/C157M-08, 2014.
54. Drying shrinkage and microstructure characteristics of mortar incorporating ground granulated blast furnace slag and shrinkage reducing admixture10.1016/j.conbuildmat.2015.05.103 ↗
55. Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes10.1016/j.cemconcomp.2014.11.009 ↗
56. Strength properties and molecular composition of epoxy-modified mortars10.1016/j.conbuildmat.2015.06.056 ↗
57. A novel TiO2/Epoxy resin composited geopolymer with great durability in wetting-drying and phosphoric acid solution10.1016/j.jclepro.2019.04.203 ↗
58. Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar10.1016/j.conbuildmat.2007.10.011 ↗
59. A brittleness index to estimate fracture toughness10.1016/j.ijrmms.2003.07.010 ↗
60. A comparative evaluation of rock strength measures10.1016/0148-9062(84)92680-9 ↗
61. J.T. Committee, AS 1012.21—1999 Methods of testing concrete Method 21: Determination of water absorption and apparent volume of permeable voids in hardened concrete Australian Standard (AS), Joint Technical Committee BD-042, Australia, 1999.
62. Mechanical and durability properties of fly ash geopolymer concrete containing recycled coarse aggregates10.1016/j.ijsbe.2016.05.009 ↗
63. F. Andrews-Phaedonos, Assessment of concrete durability using a single parameter with a high level of precision: the VPV test, in: ARRB Conference, 25th, 2012, Perth, Western Australia, Australia, 2012.
64. Experimental investigations on the properties of epoxy-resin-bonded cement concrete containing sea sand for use in unreinforced concrete applications10.3390/ma12040645 ↗
65. A review on surface treatment for concrete–Part 2: performance10.1016/j.conbuildmat.2016.11.128 ↗
66. A novel geopolymer application: coatings to protect reinforced concrete against corrosion10.1016/j.clay.2016.10.029 ↗
67. Use of polymer/organoclay nanocomposite surface treatment as water/ion barrier for concrete10.1061/(ASCE)0899-1561(2008)20:7(484) ↗
68. Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag–fly ash blends10.1016/j.conbuildmat.2015.01.065 ↗
69. Effect of pore size distribution on drying shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
70. Understanding the drying shrinkage performance of alkali-activated slag mortars10.1016/j.cemconcomp.2016.11.010 ↗
71. Shrinkage mechanisms of alkali-activated slag10.1016/j.cemconres.2016.07.001 ↗
72. Toughening mechanisms for ceramics
73. Glass matrix composites from coal flyash and waste glass10.1016/S0956-053X(97)00035-4 ↗
74. Effect of particle modulus and toughness on strength and toughness in brittle particulate composites
75. Hybrid polysaccharide–silica nanocomposites prepared by the sol–gel technique10.1021/la0356912 ↗
76. Sol–gel-derived biomaterials of silica and carrageenans10.1016/S0021-9797(03)00457-0 ↗
77. Characterization, microstructure and properties of fly ash-based geopolymer
78. Instrumental characterization of clay by XRF, XRD and FTIR10.1007/s12034-007-0042-5 ↗
79. Quantitative study of the reactivity of fly ash in geopolymerization by FTIR10.1080/21650373.2012.752620 ↗
80. Surface-coated fly ash used as filler in biodegradable poly (vinyl alcohol) composite films: Part 1—the modification process10.1016/j.apsusc.2009.11.024 ↗