journal article·2020-01

Method for evaluating segregation in self-consolidating concrete using electrical resistivity measurements

Hong Jae Yim, Young Hwan Bae, Jae Hong Kim

Publisher page

Abstract

Abstract Self-consolidating concrete requires a highly fluid binder with sufficient segregation resistance in the fresh mixture. However, careless mix proportioning with various chemical and mineral admixtures can cause instability among the components in the fresh state, including aggregate segregation. The fully or partially segregated mix expectedly exhibits low durability after it hardens. This study attempted to nondestructively evaluate the degree of static segregation in self-consolidating concrete. A column-type test mold was fabricated, which allowed cross-sectional electrical resistivity to be measured in the top and bottom sections using a total of 24 electrodes. The electrical resistivity can sensitively evaluate the relative degree of segregation in concrete mixtures. The experimental results were also compared and discussed using the coarse aggregate segregation index obtained using the conventional method, that requires wet-sieving of self-consolidating concrete in the fresh state.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Segregation characteristics of concrete containing a high-range water-reducing admixture
2. ASTM C 1610-06, Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique, Annual Book of ASTM Standards, 2006.
3. ASTM C 1712-14, Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test, Annual Book of ASTM Standards, 2014.
4. Evaluation of internal bleeding in concrete using a self-weight bleeding test10.1016/j.cemconres.2013.05.015 ↗
5. Experimental simulation of bleeding under a high concrete column10.1016/j.cemconres.2013.12.011 ↗
6. ASTM C 1611-18, Standard Test Method for Slump Flow of Self-Consolidating Concrete, Annual Book of ASTM Standards, 2018.
7. AASHTO PP58 · 2008
8. Evaluation of effect of chemical admixture and supplementary materials on stability of concrete-based materials using in-situ conductivity method
9. An In-situ conductivity method for monitoring segregation, bleeding and strength development in cement-based materials
10. Analysis of variations in electrical conductivity to assess stability of cement-based materials
11. L. Shen, Testing static segregation of SCC, in: 2nd North American Conference on The Design and Use of SCC. (2005) 729–737.
12. On-site concrete segregation estimation using image analysis10.3151/jact.6.171 ↗
13. Image processing applied to the analysis of segregation in lightweight aggregate concretes10.1016/j.conbuildmat.2011.03.028 ↗
14. Selection of superplasticizer in concrete mix design by measuring the early electrical resistivities of pastes10.1016/j.cemconcomp.2006.12.015 ↗
15. Effect of treatment temperature on the early hydration characteristics of superplasticized silica fume blended cement pastes10.1016/j.cemconres.2004.06.012 ↗
16. Electrical conductivity based characterization of plain and coarse glass powder modified cement pastes10.1016/j.cemconcomp.2007.05.005 ↗
17. Electrical resistivity and microstructural properties of concrete materials in conditions of current flow10.1016/j.cemconcomp.2008.04.001 ↗
18. Electrical conductivity of setting cement paste with different mineral admixtures10.1016/j.conbuildmat.2011.08.068 ↗
19. Evaluation of mortar setting time by using electrical resistivity measurements10.1016/j.conbuildmat.2017.04.088 ↗
20. Determining subsurface fracture characteristics from azimuthal resistivity surveys: a case study at Nsawam, Ghana10.1190/1.2073888 ↗
21. Prediction of self-compacting concrete homogeneity by ultrasonic velocity10.1016/j.aej.2015.08.002 ↗
22. Chemical admixture-cement interactions: phenomenology and physico-chemical concepts10.1016/S0958-9465(97)00062-0 ↗