Influence of initial water, moisture, and geopolymer content on geopolymer modified sludge
Source abstract
Abstract
Abstract In recent years, the development of sustainable construction materials has been the attention of several research efforts. Among those, Portland cement is the one which is of extreme importance due to its high level of carbon dioxide emissions associated with its manufacturing process. In this study, the influence of initial curing time and water content was investigated in an attempt to utilize geopolymer for modifying soft soil (sludge) in the actual landslide area caused mainly by the earthquake or heavy rainfall. Two methods for making specimen applied in this research are sludge conditioning and sludge dewatering methods in consideration of failure strength, failure strain and bulk density of modified sludge using fly ash-based geopolymer at ambient temperature. Test results indicate that the initial curing time has the potential for improving failure strain and strength of modified sludge with the specific condition of soft soil. The result further shows that the initial water content over than 50% total mass of sludge could significantly lead to the decrease of strength performance of geopolymer-based modified sludge. The optimum moisture content of geopolymer modified sludge has strong influence on the amount of geopolymer content and initial water content of the sludge.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Hazard assessment of the reactivated Muraokacho landslide in Hyogo Prefecture, Japan
2. Chen · 2000
3. Shear strength performance of marine sediments stabilized using cement, lime and fly ash10.1016/j.conbuildmat.2018.06.231 ↗
4. Properties of soil–bentonite–cement bypass mixture for cutoff walls10.1016/j.conbuildmat.2015.05.064 ↗
5. Experimental investigation on properties of gypsum-quicklime-soil grout material in the reparation of earthen site cracks10.1016/j.conbuildmat.2017.08.180 ↗
6. Study on durability for drying and wetting of cover soil for radiation-contaminated soil made of tsunami sludge
7. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
8. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
9. A novel waterproof, fast setting and high early strength repair material derived from metakaolin geopolymer10.1016/j.conbuildmat.2016.07.058 ↗
10. Sulfate and acid resistance of lithomarge-based geopolymer mortars10.1016/j.conbuildmat.2018.01.129 ↗
11. Development of metakaolin–fly ash based geopolymers for fire resistance applications10.1016/j.conbuildmat.2014.01.040 ↗
12. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
13. Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste10.1016/j.conbuildmat.2018.07.115 ↗
14. Collapsibility potential of gypseous soil stabilized with fly ash geopolymer; characterization and assessment10.1016/j.conbuildmat.2017.01.079 ↗
15. Clayey soil stabilization using geopolymer and Portland cement10.1016/j.conbuildmat.2018.07.207 ↗
16. Compressive strength of fly-ash-based geopolymer concrete at elevated temperatures10.1002/fam.2240 ↗
17. High-strength geopolymer using fine high-calcium fly ash10.1061/(ASCE)MT.1943-5533.0000161 ↗
18. Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive10.1007/s12613-013-0715-6 ↗
19. ASTM, “Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils”, in D 4318. D 4318: West Conshocken, PA.
20. ASTM, “Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete”, in C618-12a. C 618: West Conshocken, PA.
21. Study on effect of chemical composition of geopolymer to improve sludge by using fiber materials
22. Alkali-activated fly ashes A cement for the future10.1016/S0008-8846(98)00243-9 ↗
23. Optimization of Alkaline Activator/Fly ASH Ratio on the Compressive Strength of Manufacturing Fly ASH-BASED Geopolymer
24. Microstructure studies on the effect of the alkaline activators of fly ash-based geopolymer at elevated heat treatment temperature10.4028/www.scientific.net/AMM.421.342 ↗
25. Construction Materials: Soil and Natural Materials
26. Mitchell · 2005
27. The Effect of Moisture Content, Bulking Agent Ratio and Compaction on Permeability and Air-Filled Porosity in Composting Matrices
28. Sulfate resistance of clay-portland cement and clay high-calcium fly ash geopolymer10.1061/(ASCE)MT.1943-5533.0001112 ↗
29. Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludge10.1016/j.conbuildmat.2015.02.040 ↗
30. Laboratory investigations on the lime stabilization of sensitive clays: shear strength development10.1139/t90-040 ↗
31. Estimating optimum water content and maximum dry unit weight for compacted clays10.1061/(ASCE)1090-0241(1998)124:9(907) ↗
32. Relationship of strength properties to bulk density and macroporosity in cultivated loamy sand to loam soils10.1016/0167-1987(90)90082-O ↗
33. Study on weak soil improvement by using geopolymer and paper fragments10.5188/ijsmer.23.203 ↗
34. The influence of water removal techniques on the composition and microstructure of hardened cement pastes10.1016/j.cemconres.2008.02.012 ↗
35. Geopolymer and geopolymer material10.1007/BF01904446 ↗
36. ASTM, Standard Guide for Evaluating Effectiveness of Chemicals for Soil Stabilization, in D 4609 – 94.
37. Effect of soil moisture content and dry density on cohesive soil-geosynthetic interactions using large direct shear tests10.1061/(ASCE)0899-1561(2007)19:7(540) ↗
38. Experimental feasibility study of geopolymer as the next-generation soil stabilizer10.1016/j.conbuildmat.2013.06.017 ↗
39. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
40. Microstructure of geopolymer materials based on fly ash
41. Effect of alkali-activator and rice husk ash content on strength development of fly ash and residual rice husk ash-based geopolymers10.1016/j.conbuildmat.2015.10.025 ↗
42. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites10.1016/j.cemconcomp.2012.11.010 ↗
43. Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder10.1016/j.conbuildmat.2012.07.075 ↗
44. Rama Mohan Rao, A. and Ramanjaneyulu, K., Recent Advances in Structural Engineering. 2019: Springer.
45. Effect of initial cure time on toughness of geopolymer matrix composites10.1016/j.ceramint.2017.04.173 ↗