journal article·2020-06

Effects of fillers on the properties of cement grouts

Manisha Vasumithran, K.B. Anand, Dhanya Sathyan

Publisher page

Abstract

Abstract Cement grout is a mixture utilized for connecting different precast sections, filling voids or sealing joints. The present study reports the suitability of incorporation of fillers such as fine sand and fly ash in cement to develop grouts and evaluation of the flowability and mechanical properties of the prepared grouts. Filler incorporated mixes at low water-cement ratios were not workable. Hence, the workability had to be achieved by addition of chemical admixture, i.e., superplasticizer. In this study, polycarboxylate ether based superplasticizer is added during the mixing process. Different compositions of grouts are prepared for the experimental study. 10% of cement mass is replaced with silica fume in all the grouts whereas up to 50% of cement mass is replaced with fillers in certain mixes and the fresh and hardened state properties are evaluated. Excessive bleeding, grout instability, long setting times and low mechanical strengths are some of the problems associated when the water-cement ratio is increased. Mixes incorporating silica fume only showed poor workability at low water-cement ratios but improved strength compared to other mix types. Grouts incorporating fine sand and fly ash showed poor early age strengths compared to cement grouts containing silica fume only. Also, grouts with fine sand as filler showed improved performance for shrinkage and water absorption over plain cement grouts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Development of a lime-based grout for cracks repair in earthen constructions10.1016/j.conbuildmat.2016.02.030 ↗
2. Influence of the vertical grouting in the interface between corbel and beam in beam-to-column connections of precast concrete structures–an experimental analysis10.1016/j.engstruct.2018.05.113 ↗
3. Grouted sleeve connections used in precast reinforced concrete construction–experimental investigation of a column-to-column joint10.1016/j.engstruct.2016.09.021 ↗
4. Effect of different superplasticizers on the physical and mechanical properties of cement grouts10.1016/j.conbuildmat.2013.09.050 ↗
5. Effect of mineral admixture types on the grout strength of fully-grouted rock bolts10.1016/j.conbuildmat.2017.04.046 ↗
6. Investigations on the cementitious grouts containing supplementary cementitious materials10.1016/S0008-8846(02)00799-8 ↗
7. Ternary mix design of grout material for structural repair using statistical tools10.1016/j.conbuildmat.2018.08.156 ↗
8. Effects of CSF on strength, rheology and cohesiveness of cement paste10.1016/j.conbuildmat.2012.04.037 ↗
9. Effects of densified silica fume on microstructure and compressive strength of blended cement pastes10.1016/S0008-8846(03)00100-5 ↗
10. Effect of different sand grading on strength properties of cement grout10.1016/j.conbuildmat.2012.08.030 ↗
11. Improving the properties of cement–fly ash grout using fiber and superplasticizer10.1016/S0008-8846(01)00527-0 ↗
12. Basic rheological and mechanical properties of high-volume fly ash grouts10.1016/S0950-0618(02)00026-0 ↗
13. Graybeal · 2017
14. Grout-concrete interface bond performance: effect of interface moisture on the tensilebond strength and grout microstructure10.1016/j.conbuildmat.2018.03.076 ↗
15. IS 4031 (Reaffirmed 2005): Methods of physical tests for hydraulic cements, Part V: Determination of initial and final setting times [CED 2: Cement and Concrete], 1988.
16. IS 4031-4 Reaffirmed (2005): Methods of physical tests for hydraulic cement, Part 4: Determination of consistency of standard cement paste [CED 2: Cement and Concrete], 1988.
17. IS 4031-11, Reaffirmed (2005): Methods of physical tests for hydraulic cement, Part 11: Determination of density [CED 2: Cement and Concrete], 1988.
18. ASTM C 1240 Standard Specification for Silica Fume used in cementitious Mixtures.
19. IS 1727, Methods for Tests of Pozzolanic Materials, 2004
20. IS 4031 (Reaffirmed 2005): Methods of physical tests for hydraulic cements, Part VI: Determination of compressive strength of hydraulic cement, 1988.
21. Characterization of morphology and texture of several amorphous nano-silica particles used in concrete10.1016/j.cemconcomp.2013.05.006 ↗
22. Experimental Study on Portland Pozzolana Cement-Superplasticiser compatibility in mortar
23. Temperature influence on rheology of superplasticizedpozzolana cement and modeling using random kitchen sink algorithm10.1061/(ASCE)MT.1943-5533.0002406 ↗
24. ASTM C 939, Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method).
25. ASTM C 940, Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory.
26. High-performance cementitious grouts for structural repair10.1016/S0008-8846(02)00710-X ↗
27. ASTM C 953, Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory.
28. ASTM C 937 – 02 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete.
29. Sigma Plot 12.0 software.
30. Properties of cement grout modified with ultra-fine slag10.1007/s11709-017-0383-0 ↗
31. Stability of a new geopolymer grout: Rheological and mechanical performances of metakaolin-fly ash binary mixtures10.1016/j.conbuildmat.2018.06.025 ↗
32. Portland cement-fly ash, silica fume systems in concrete10.1016/1065-7355(93)90013-E ↗
33. ASTM C 348, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars.
34. Ultra high strength grouts for filling steel pipes in offshore wind turbines
35. ASTM C157, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete.
36. Effects of supplementary cementitious materials on mechanical and durability properties of high-performance non-shrinking grout (HPNSG)
37. ASTM C1403 – 13, Standard Test Method for Rate of Water Absorption of Masonry Mortars.
38. Evolution of porosity and calcium hydroxide in laboratory concretes containing silica fume10.1016/0008-8846(94)90027-2 ↗