journal article·2020-06

Effect of mixing time on hydration kinetics and mechanical property of cemented paste backfill

Liuhua Yang, Hongjiang Wang, Aixiang Wu, Hong Li, Tchamba Arlin Bruno, Xu Zhou, Xiantian Wang

Publisher page

Abstract

Abstract Mixing is a crucial step in the application of any cement-based material. To have a clear understanding of the effect of mixing on cemented paste backfill (CPB) properties is necessary for the preparation of high-quality CPB. This paper researches the effect of mixing time on fresh and hardened properties of CPB, such as hydration kinetics, mechanical property, micro-structural characterization, and ion elution by using inductively coupled plasma mass spectrometry (ICP). The results show that the hydration kinetics and mechanical property of the CPB are sensitive to the mixing time. The mixing time mainly affects the acceleration period, and an improved shearing condition is beneficial to the improvement of the mechanical strength of CPB, especially the early strength, while excessive mixing causes deterioration to mechanical property. These observations can be explained by changes in physical and chemical composition of fresh state CPB due to different mixing programs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Underground infrastructure and sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Experimental characterization of the influence of solid components on the rheological and mechanical properties of cemented paste backfill10.1016/j.minpro.2017.09.019 ↗
2. Yield stress of cemented paste backfill in sub-zero environments: experimental results10.1016/j.mineng.2016.03.014 ↗
3. Potential use of densified polymer-pastefill mixture as waste containment barrier materials10.1016/j.wasman.2010.07.016 ↗
4. On possibilities of using global monitoring in effective prevention of tailings storage facilities failures10.1007/s11356-017-0995-x ↗
5. Preventing catastrophic failures and mitigating environmental impacts of tailings storage facilities10.1016/j.proeps.2009.09.164 ↗
6. Development of an environmental impact and mitigation assessment program for a tailings storage facility stability upgrade10.1076/ijsm.15.2.123.3415 ↗
7. Mix proportioning of underground cemented tailings backfill10.1016/j.tust.2006.08.005 ↗
8. Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented paste backfill of sulphide-rich tailings10.1016/j.conbuildmat.2015.06.042 ↗
9. Thixotropy of unclassified pastes in the process of stirring and shearing
10. Further development of paste definition from the viewpoint of yield stress
11. Flow characteristics of cemented paste backfill10.1007/s10706-018-0460-8 ↗
12. Using coupled rheometer-FBRM to study rheological properties and microstructure of cemented paste backfill
13. Effect of mixing method on microstructure and rheology of cement paste10.1016/j.conbuildmat.2015.05.124 ↗
14. Multi-scale materials’ dispersive mixing technology of unclassified tailings paste
15. A contribution to understanding the effect of temperatures on the mechanical properties of mine cemented tailings backfill: experimental results10.1016/j.enggeo.2010.05.016 ↗
16. Coupled effect of cement hydration and temperature on hydraulic behavior of cemented tailings backfill10.1007/s11771-015-2715-3 ↗
17. Influence of mixing method on the cement temperature-mixing time history and doughing time of three acrylic cements for vertebroplasty10.1002/jbm.b.20009 ↗
18. Combination of modified mixing technique and low frequency ultrasound to control the elution profile of vancomycin-loaded acrylic bone cement10.1302/2046-3758.52.2000412 ↗
19. Effect of high mixing intensity on rheological properties of cemented paste backfill10.3390/min9040240 ↗
20. Concrete mixing kinetics by means of power measurement10.1016/j.cemconres.2008.12.005 ↗
21. Concrete mixing methods and concrete mixers: state of the art10.6028/jres.106.016 ↗
22. Status and development tendency of the full-tailings paste mixing technology
23. In-mixer measurements for describing mixture evolution during concrete mixing10.1016/j.cherd.2008.08.021 ↗
24. Assessment and classification of performance mixers10.1007/BF02479619 ↗
25. ASTM C305 · 2012
26. ASTM C1738 · 2011
27. Influence of mixing procedure and mixer type on fresh and hardened properties of concrete: a review10.1617/s11527-012-9864-8 ↗
28. Why do HPC and SCC require a longer mixing time?10.1016/j.cemconres.2004.02.012 ↗
29. Influence of dispersant structure and mixing speed on concrete slump retention10.1016/j.cemconres.2005.04.013 ↗
30. Effects of mixing energy on technological properties and hydration kinetics of grouting mortars10.1016/j.cemconres.2011.07.005 ↗
31. Dimensional analysis of a planetary mixer for homogenizing of free flowing powders: mixing time and power consumption10.1016/j.cej.2012.05.069 ↗
32. Characterization of the granular-to-fluid state process during mixing by power evolution in a planetary concrete mixer10.1016/j.ces.2008.06.001 ↗
33. The effects of mixing time on cement paste slurry transportation and mechanical property
34. Influence of mixing methods on performance of compressive strength for cement stabilized macadam mixture
35. The influence of mixing on the microstructure of the cement paste/aggregate interfacial zone and the strength of mortar10.1007/BF00576298 ↗
36. Effects of sand content, superplasticizer dosage, and mixing time on compressive strength of mortar
37. Influences of mixing methods on the microstructure and rheological behavior of cement paste10.1016/1065-7355(95)90027-6 ↗
38. Effects of mixing variables on hardened characteristics of Portland cement mortars
39. Evaluation of workability and strength development of fly ash pastes prepared with industrial brines rich in SO4- and Cl- to expand brine utilization10.1016/j.mineng.2011.05.015 ↗
40. Effect of specimen composition on the strength development in cemented paste backfill10.1139/t06-005 ↗
41. Determination of the energy consumption during the production of various concrete recipes10.1016/j.cemconres.2009.04.001 ↗
42. ASTM/C143M-15a · 2015
43. Dissolution theory applied to the induction period in alite hydration10.1016/j.cemconres.2010.01.012 ↗
44. Effect of mixing on the early hydration of alite and OPC systems10.1016/j.cemconres.2011.06.011 ↗
45. Hydration mechanisms, I
46. Hydrated layer formation on tricalcium and dicalcium silicate surfaces: experimental study and numerical simulations10.1021/la011201z ↗
47. Retardation of tricalcium aluminate hydration by sulfates10.1111/j.1151-2916.1977.tb15503.x ↗
48. Influence of high mixing intensity on rheology, hydration, and microstructure of fresh state cement paste10.1016/j.cemconres.2016.03.004 ↗
49. Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete10.1016/j.conbuildmat.2012.04.013 ↗
50. An experimental study on the early-age hydration kinetics of cemented paste backfill10.1016/j.conbuildmat.2019.03.322 ↗
51. Mixing of high performance concrete: Effect of concrete composition and mixing intensity on mixing time10.1617/s11527-009-9494-y ↗
52. Insights into early hydration of Portland limestone cement from infrared spectroscopy and isothermal calorimetry
53. Suto · 1999
54. Studying nucleation and growth kinetics of alite hydration using μic10.1016/j.cemconres.2009.07.004 ↗
55. Evaluation of short-term strength development of cemented backfill with varying sulphide contents and the use of additives10.1016/j.jenvman.2019.03.057 ↗
56. Experimental investigation of calcium silicate hydrate (C–S–H) nucleation10.1016/S0022-0248(99)00051-2 ↗
57. Mechanisms of degradation in rheological properties due to pumping and mixing10.1520/ACEM20140004 ↗
58. Microcalorimetric test and analysis of hydration heat of fly ash paste-filling material