journal article·2020-07

The effect of elevated temperatures on the compressive section capacity of pultruded GFRP profiles

Mohammad Houshmand Khaneghahi, Esmaeil Pournamazian Najafabadi, Milad Bazli, Asghar Vatani Oskouei, Xiao-Ling Zhao

Publisher page

Abstract

The compressive performance of glass fiber reinforced polymer (GFRP) profiles subjected to elevated temperature was investigated through a large number of (3 0 0) tests. The effects of profile cross-sectional area, slenderness, and temperature on the behavior of the GFRP profiles at temperatures ranging from 25 to 400 °C were determined. It was observed that the compressive strength of the GFRP profiles has been decreased by half as the temperature exceeded 90 °C, i.e., close to the glass transition temperature of the matrix. The temperature and ratio of cross-sectional area to external perimeter were determined as two major parameters affecting section capacity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Modified hemp fibers intended for fiber-reinforced polymer composites used in structural applications—A review10.1002/pc.25354 ↗
2. Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: A review
3. Effect of sustained load and seawater and sea sand concrete environment on durability of basalt-and glass-fibre reinforced polymer (B/GFRP) bars10.1016/j.corsci.2018.04.002 ↗
4. Effect of intumescent paint coating on mechanical properties of FRP bars at elevated temperature10.1016/j.polymertesting.2018.08.020 ↗
5. An experimental study of pultruded glass fibre reinforced plastics channel columns at elevated temperatures10.1016/j.compstruct.2006.08.001 ↗
6. The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets10.1016/j.conbuildmat.2018.09.086 ↗
7. Long-term durability of basalt-and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment10.1016/j.conbuildmat.2017.02.038 ↗
8. Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns10.1016/j.tws.2016.05.014 ↗
9. Fiber-reinforced polymer composites in strengthening reinforced concrete structures: A critical review
10. Long-term durability of FRP bond in the midwest United States for externally strengthened bridge components10.1061/(ASCE)CC.1943-5614.0000928 ↗
11. Moisture diffusion in glass–fiber-reinforced polymer composite bridge under hot/wet environment10.1016/j.compositesb.2012.04.067 ↗
12. Effects of ultraviolet radiation exposure on vinyl ester resins: characterization of chemical, physical and mechanical damage10.1016/S0141-3910(02)00300-2 ↗
13. Flexural properties loss of unidirectional epoxy/fique composites immersed in water and alkaline medium for construction application10.1016/j.compositesb.2012.04.027 ↗
14. Effect of harsh environments on mechanical properties of GFRP pultruded profiles10.1016/j.compositesb.2016.06.019 ↗
15. The tensile performance of FRP bars embedded in concrete under elevated temperatures10.1016/j.conbuildmat.2019.03.239 ↗
16. Effect of Sequential Exposure to UV Radiation and Water Vapor Condensation and Extreme Temperatures on the Mechanical Properties of GFRP Bars10.1061/(ASCE)CC.1943-5614.0000828 ↗
17. Chung · 2012
18. Structural response of FRP composites during fire10.1016/j.compstruct.2008.02.018 ↗
19. An experimental and numerical study of the behaviour of glass fibre reinforced plastics (GRP) short columns at elevated temperatures10.1016/S0263-8223(03)00122-3 ↗
20. Performances at high temperature of RC bridge decks strengthened with EBR-FRP10.1016/j.compositesb.2014.08.011 ↗
21. Mechanical properties and bond characteristics of different fiber reinforced polymer rebars at elevated temperatures10.1016/j.conbuildmat.2017.03.113 ↗
22. Protchenko K, Szmigiera E, Urbanski M, Garbacz A, Narloch P, Lesniak P. State-of-the-Art on Fire Resistance Aspects of FRP Reinforcing Bars. InIOP Conference Series: Materials Science and Engineering 2019 Nov (Vol. 661, No. 1, p. 012081). IOP Publishing.10.1088/1757-899X/661/1/012081 ↗
23. Temperature effect on the mechanical properties of carbon, glass and carbon–glass FRP laminates10.1016/j.conbuildmat.2014.11.020 ↗
24. Laminate theory analysis of composites under load in fire10.1177/0021998305055543 ↗
25. Models for predicting elastic modulus and tensile strength of carbon, basalt and hybrid carbon-basalt FRP laminates at elevated temperatures10.1016/j.conbuildmat.2016.03.175 ↗
26. Effect of fire on FRP reinforced concrete members10.1016/S0263-8223(02)00045-4 ↗
27. Experimental investigation and probabilistic models for residual mechanical properties of GFRP pultruded profiles exposed to elevated temperatures10.1016/j.compstruct.2018.12.032 ↗
28. Effect of thickness and reinforcement configuration on flexural and impact behaviour of GFRP laminates after exposure to elevated temperatures10.1016/j.compositesb.2018.08.054 ↗
29. Tensile properties of GFRP laminates after exposure to elevated temperatures: Effect of fiber configuration, sample thickness, and time of exposure
30. Effect of fibers configuration and thickness on tensile behavior of GFRP laminates subjected to elevated temperatures10.1016/j.conbuildmat.2019.01.003 ↗
31. Fire behaviour of FRP-strengthened reinforced concrete structural elements: a state-of-the-art review10.1016/j.compositesb.2015.05.045 ↗
32. Mechanical properties of fire-damaged glass-reinforced phenolic composites10.1002/1099-1018(200003/04)24:2<67::AID-FAM720>3.0.CO;2-0 ↗
33. ASTM Committee D-20 on Plastics. Standard test method for compressive properties of rigid plastics. ASTM International; 2008.
34. Local buckling curves for the design of FRP profiles10.1016/S0263-8231(00)00023-9 ↗
35. Local buckling of FRP beams and columns10.1061/(ASCE)0899-1561(1993)5:3(339) ↗
36. Nunes FF. Structural behavior of GFRP pultruded profiles reinforced with CFRP sheets.
37. Experimental study of the flexural and compression performance of an innovative pultruded glass-fiber-reinforced polymer-wood composite profile10.1371/journal.pone.0140893 ↗
38. Box, G. E., & Tiao, G. C., Bayesian inference in statistical analysis(Vol. 40), John Wiley & Sons, 2011.
39. Component damage models for detailed seismic risk analysis using structural reliability methods10.1016/j.strusafe.2018.08.004 ↗
40. Detailed seismic risk analysis of buildings using structural reliability methods10.1016/j.probengmech.2018.04.001 ↗
41. Evaluation of seismic reliability of gravity dam-reservoirinhomogeneous foundation coupled system10.1007/s11709-018-0507-1 ↗
42. Risk-based probabilistic thermal-stress analysis of concrete arch dams10.1007/s11709-019-0521-y ↗
43. Uncertainty quantification of the fracture properties of polymeric nanocomposites based on phase field modeling10.1016/j.compstruct.2015.08.051 ↗
44. Nardone, F., Di Ludovico, M., y Basalo, F. J. D. C., Prota, A., & Nanni, A. Tensile behavior of epoxy based FRP composites under extreme service conditions.Composites Part B: Engineering. 2012 43(3), 1468-1474.10.1016/j.compositesb.2011.08.042 ↗
45. Reliability and variance-based sensitivity analysis of arch dams during construction and reservoir impoundment
46. Laboratory and in situ investigation of the compressive strength of CFRD concrete
47. Experimental designs using ANOVA