journal article·2020-08

Effect of gypsum on the properties of composite binder containing high-volume slag and iron tailing powder

Fanghui Han, Yu Zhou, Zengqi Zhang

Publisher page

Abstract

Abstract The effect of gypsum on the properties of composite binder containing high-volume slag and iron tailing powder was studied by measuring compressive strength, hydration heat, bound water content, hydration products, pore structure and morphology. The addition of gypsum increases early-age compressive strength and bound water content, but the opposite trend is observed at later ages. A higher quantity of gypsum leads to a higher third exothermic peak and a higher total hydration heat. Although incorporating gypsum promotes early hydration of cement and slag, it limits their further hydration at later ages. Adding gypsum forms a large amount of ettringite and densifies early-age pore structure, but it coarsens later-age pore structure. The addition of gypsum increases Ca/Si and S/Si ratios of C-S-H, but it doesn’t affect Al/Si ratio. The addition of gypsum compensates for the poor early-age properties of composite binder containing high-volume slag and iron tailing powder, and the later-age properties are acceptable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
2. The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures10.1016/j.jclepro.2015.02.050 ↗
3. S. Abd El.Aleem, Hydration characteristics of granulated slag with fired by-pass cement dust, Silic. Ind. 69 (2004) 46-52.
4. M. Abd El.Aziz, S. Abd El.Aleem, M. Heikal, H. El. Didamony, hydration and durability of sulphate-resisting and slag cement blends in Caron's Lake water, Cem. Concr. Res. 35 (2005) 1592-1600.10.1016/j.cemconres.2004.06.038 ↗
5. Physico-mechanical and chemical properties of composite cement containing high percentages of mechanically activated egyptian slag
6. S. Abd El-Aleem Mohamed, Activation of granulated blast-furnace slag using lime rich sludge in presence and absence of rice husk ash, Int. J. Inno. Technol. Explor. Eng. 5 (2015) 43-51.
7. Comparative study of reaction degree of mineral admixture by selective dissolution and image analysis10.1016/j.conbuildmat.2016.03.221 ↗
8. The life cycle inventory study of cement manufacture in China10.1016/j.jclepro.2014.02.048 ↗
9. An overview on rheology, mechanical properties and durability of high-volume slag used as a cement replacement in paste mortar and concrete10.1016/j.conbuildmat.2018.07.150 ↗
10. Reuse of hazardous electrolytic manganese residue: Detailed leaching characterization and novel application as a cementitious material10.1016/j.resconrec.2019.104645 ↗
11. Innovative methodology for comprehensive utilization of iron ore tailings part 2: the residues after iron recovery from iron ore tailings to prepare cementitious materials10.1016/j.jhazmat.2009.09.019 ↗
12. A comparative study on the practical utilization of iron tailings as a complete replacement of normal aggregates in dam concrete with different gradation10.1016/j.jclepro.2018.11.107 ↗
13. Evaluation of iron ore tailings as replacement for fine aggregate in concrete10.1016/j.conbuildmat.2016.05.095 ↗
14. Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete10.1016/j.conbuildmat.2013.10.019 ↗
15. Development of green engineered cementitious composites using iron ore tailings as aggregates10.1016/j.conbuildmat.2013.03.088 ↗
16. Early-age hydration characteristics of composite binder containing iron tailing powder10.1016/j.powtec.2017.04.022 ↗
17. Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete10.1016/j.conbuildmat.2016.05.020 ↗
18. Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious system using limestone filler10.1617/s11527-010-9637-1 ↗
19. Ternary blends containing slag and interground/blended limestone: hydration, strength, and pore structure10.1016/j.conbuildmat.2015.10.179 ↗
20. Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects10.1016/j.conbuildmat.2019.02.139 ↗
21. Properties of steam-cured precast concrete containing iron tailing powder10.1016/j.powtec.2019.01.007 ↗
22. Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle10.1016/j.conbuildmat.2016.05.059 ↗
23. Influence of limestone and anhydrite on the hydration of Portland cements10.1016/j.cemconcomp.2013.11.007 ↗
24. Optimization of the SO3 content of an Algerian Portland cement: study on the effect of various amounts of gypsum on cement properties10.1016/j.conbuildmat.2017.12.218 ↗
25. Effect of gypsum on properties and internal structure of PC paste10.1016/0008-8846(86)90087-6 ↗
26. Effect of sulfate additions on hydration and performance of ternary slag-limestone composite cements10.1016/j.conbuildmat.2017.12.165 ↗
27. Effect of gypsum content in sprayed cementitious matrices: early age hydration and mechanical properties10.1016/j.cemconcomp.2018.10.015 ↗
28. Utilization of flue gas desulfurization gypsum as an activation agent for high-volume slag concrete10.1016/j.jclepro.2018.09.145 ↗
29. Advances in understanding cement hydration mechanisms10.1016/j.cemconres.2019.105823 ↗
30. Effect of temperature on hydration of composite binder containing slag
31. Effect of gypsum on the hydration and strength development of commercial Portland cements containing alkalis sulfates10.1016/0008-8846(77)90085-0 ↗
32. F. Zunino, K.L. Scrivener, The influence of the filler effect in the sulfate reqirement of OPC and blended cements, Cem. Concr. Res. (2019) Submitted.10.1016/j.cemconres.2019.105918 ↗
33. Interactions between alite and C3A-gypsum hydrations in model cements10.1016/j.cemconres.2012.10.018 ↗
34. Mechanisms and parameters controlling the tricalcium aluminate reactivity in the presence of gypsum10.1016/j.cemconres.2007.06.001 ↗
35. Early C3A hydration in the presence of different kinds of calcium sulfate10.1016/j.cemconres.2009.07.019 ↗
36. Hydration of slag-blended cements10.1016/j.cemconcomp.2012.05.007 ↗
37. Hydration of various beta-calcium silicate preparations10.1111/j.1151-2916.1979.tb12746.x ↗
38. P. Juilland, Early hydration of cementitious systems, PhD Thesis École Polytechnique Fédérale de Laussane. 2009.
39. Hydration behavior of lime co-calcined kaolin-petroleum effluent treatment plant sludge10.1016/S0008-8846(01)00676-7 ↗
40. Study on infrared spectra of sulphoaluminate cement (in Chinese)
41. Properties of high-volume limestone powder concrete under standard curing and steam-curing conditions10.1016/j.powtec.2016.05.054 ↗
42. Study on the grinding kinetics of copper tailing powder10.1016/j.powtec.2018.02.025 ↗
43. A gap-graded particle size distribution for blended cements: Analytical approach and experimental validation10.1016/j.powtec.2011.08.018 ↗
44. Measurement of continuum percolation properties of two-dimensional particulate systems comprising congruent and binary superellipses10.1016/j.powtec.2019.02.036 ↗
45. Quantification of the influences of aggregate shape and sampling method on the overestimation of ITZ thickness in cementitious materials10.1016/j.powtec.2017.12.008 ↗
46. Reconstruction of broken Si-O-Si bonds in iron ore tailings (IOTs) in concrete10.1007/s12613-019-1811-z ↗