Anisotropy and bond behaviour of recycled Polyethylene terephthalate (PET) fibre as concrete reinforcement
Source abstract
Abstract
Abstract This paper studied the anisotropy of the recycled Polyethylene terephthalate (PET) and as reinforcing fibres for concrete considering three experimental campaign e.g. uni-axial tension, pullout, and three point-bending. The study also relates parameters such as fibre position and embedded length. In total, 18 recycled PET samples with dog-bone shape are prepared for the uni-axial tension test, 54 samples (embedded recycled PET fibre in concrete) for the pullout test, and 12 recycled PET fibre reinforced concrete samples for the 3-point bending tests. The data were analysed using ANOVA and Tukey methods to get statistical confidence. Tensile results demonstrated anisotropy in recycled PET, but its effect was low in the recycled PET fibre-concrete interface behaviour. Also, the results show a weaker pullout capacity of the PET fibre-concrete interface than the PET tensile strength. The addition of recycled PET fibre showed about 6% increase in flexural strength of concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Plastic wastes to construction products: status, limitations and future perspective
2. Recycled fibres in reinforced concrete: a systematic literature review10.1016/j.jclepro.2019.119207 ↗
3. How consumers of plastic water bottles are responding to environmental policies?10.1016/j.wasman.2016.12.034 ↗
4. Use of recycled plastics in concrete: a critical review10.1016/j.wasman.2016.03.005 ↗
5. Using waste plastic bottles as additive for stone mastic asphalt10.1016/j.matdes.2011.06.016 ↗
6. M.P. Groover, (2007). Fundamentals of modern manufacturing. Mc. Graw Hill, third edition.
7. Tensile and flexural behaviour of recycled polyethylene terephthalate (PET) fibre reinforced geopolymer composites10.1016/j.conbuildmat.2020.118438 ↗
8. T.M. Borhan,·M. S. Abo Dhaheer,·Z.A. Mahdi. Characteristics of Sustainable Self-compacting Concrete Reinforced by Fibres from Waste Materials. Arabian J. Sci. Eng. 45 (2020) 4359–4367. https://doi.org/10.1007/s13369-020-04460-310.1007/s13369-020-04460-3 ↗
9. Effect of aspect ratio and dosage on the flexural response of FRC with recycled fibre10.1016/j.conbuildmat.2019.04.081 ↗
10. Study of concretes reinforced by plastic fibres based on local materials10.4028/www.scientific.net/JERA.42.100 ↗
11. Splitting tensile and pullout behaviour of synthetic wastes as fibre-reinforced concrete10.1016/j.conbuildmat.2018.03.122 ↗
12. Recycling polyethylene terephthalate wastes as short fibres in Strain hardening cementitious composites (SHCC)10.1016/j.jhazmat.2018.05.046 ↗
13. The impact resistance and mechanical properties of the reinforced self-compacting concrete incorporating recycled CFRP fibre with different lengths and dosages10.1016/j.compositesb.2016.12.029 ↗
14. Use of recycled waste pet bottles fibers for the reinforcement of concrete10.1016/j.compstruct.2012.09.019 ↗
15. Early age performance and mechanical characteristics of recycled PET fibre reinforced concrete10.1016/j.conbuildmat.2016.01.029 ↗
16. Physical and mechanical behaviour of recycled PET fibre reinforced mortar10.1016/j.conbuildmat.2010.11.044 ↗
17. Material and structural performance evaluation of recycled PET fiber reinforced concrete10.1016/j.cemconcomp.2009.11.002 ↗
18. Reusing waste plastic bottles as an alternative sustainable building material10.1016/j.esd.2014.11.001 ↗
19. Pull-out behaviour of hooked end steel fibres embedded in ultra-high performance mortar with various w/b ratios international10.1007/s40069-017-0193-8 ↗
20. Predicting the pullout response of inclined straight steel Fibres10.1617/s11527-009-9553-4 ↗
21. The pull-out behaviour of straight and hooked-end steel fibre from hybrid fibre reinforced cementitious composite: experimental study and analytical modelling10.1016/j.compstruct.2018.08.066 ↗
22. Mechanical analyses of hooked fibre pullout performance in ultra-high-performance concrete10.1016/j.conbuildmat.2014.07.049 ↗
23. D.Y. Yoo, J.Y. Gim, B. Chun. Effects of rust layer and corrosion degree on the pullout behaviour of steel fibres from ultra-high-performance concrete. J. Mater. Res. Technol. JMRTEC-1356 (2020).10.1016/j.jmrt.2020.01.101 ↗
24. Pullout behaviour of steel fibres with different shapes from ultra-high performance concrete (UHPC) prepared with granite powder under different curing conditions10.1016/j.conbuildmat.2019.03.274 ↗
25. Pullout response of ultra-high-performance concrete with twisted steel fibres10.3390/app9040658 ↗
26. Rate effect in inclined fibre pull-out for smooth and hooked-end fibres: a numerical study10.1007/s10704-019-00404-7 ↗
27. Modified pullout test for indirect characterization of natural fibre and cementitious matrix interface properties10.1016/j.conbuildmat.2019.03.021 ↗
28. F.U.A Shaikh. Pullout behaviour of hook end steel fibres in geopolymers. J. Mater. Civ. Eng. 31 (6) (2019). DOI:10.1061/(ASCE)MT.19435533.0002722.10.1061/(ASCE)MT.1943-5533.0002722 ↗
29. Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar10.1016/j.conbuildmat.2016.04.090 ↗
30. Experimental, analytical and numerical analysis of the pullout behaviour of steel fibres considering different fibre types, inclinations and concrete strengths10.1002/suco.201300058 ↗
31. Pullout behaviour of straight and hooked-end steel fibres in UHPC matrix with various embedded angles10.1016/j.conbuildmat.2018.10.067 ↗
32. Pullout behaviour of steel fibres in self-compacting concrete10.1061/(ASCE)MT.1943-5533.0000001 ↗
33. Comparative evaluation of virgin and recycled polypropylene fibre reinforced concrete10.1016/j.conbuildmat.2016.03.162 ↗
34. ASTM C39/C39M (2018), “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens”, West Conshohocken (PA): ASTM International.
35. Fib CEB FIP (2010) “Model Code 2010, first complete draft”, volume 1, DCC Document Competence Center Siegmar Kästl e.K., Germany.
36. Mechanical behaviour of urban plastic with tensional load
37. Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength10.1016/j.wasman.2008.12.002 ↗
38. ASTM C-192 (2018), “Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory”, Annual Book of ASTM Standards, West Conshohocken, PA, United States.
39. A method for optimal design of steel fibre reinforced concrete composition10.1016/j.matdes.2011.02.036 ↗
40. Statistical modeling and optimization of the flexural strength, water absorption and density of a doum palm-Kankara clay filler hybrid composite
41. Pullout behaviour of high-strength steel fibres embedded in ultra-high-performance concrete
42. Effect of ultra-high-performance concrete on pullout behaviour of high-strength brass-coated straight steel fibres
43. JSCE-SF4. Standard for flexural strength and flexural toughness, method of tests for steel fiber reinforced concrete. Japan Concrete Institute, Concrete library of JSCE, JSCE-SF4; 1984.
44. J.P. Won, C.I. Jang, S.W. lee, S.J. Lee, H.Y. Kim, Long-term performance of recycled PET fibre reinforced cement composites, Constr. Build. Mater. 24 (2010) 660–665.10.1016/j.conbuildmat.2009.11.003 ↗
45. Degradation of recycled Pet fibre in Portland cement based materials10.1016/j.cemconres.2004.10.040 ↗