Experimental application of digital image correlation for the tensile characterization of basalt FRCM composites
Source abstract
Abstract
Abstract Composites made with inorganic matrix, namely fabric reinforced cementitious mortar (FRCM) composites are becoming widespread as strengthening materials for existing masonry structures. These composites are made of a dry grid of fibres embedded in an inorganic matrix. FRCMs can be considered a valid alternative to traditional organic composites such as fibre reinforced polymers (FRPs) because of their better compatibility with the masonry support. This work presents an experimental study for the tensile characterization of a basalt fabric reinforced cementitious mortar (BFRCM) composite. Tensile tests were carried out on coupons reinforced with one, two or three layers of grid to investigate the influence of the reinforcement on the load–strain and stress–strain response of the composite. The basalt grid and cementitious mortar matrix were also tested in order to compare the mechanical properties of the constituent materials to the response of the composite. The digital image correlation (DIC) technique was used to check in-plane and out-of-plane bending effect, to measure the crack opening and to analyse the crack pattern evolution and failure modes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Experimental tests on FRCM strengthening systems for tuff masonry elements10.1016/j.conbuildmat.2017.01.124 ↗
2. Mechanical characterization of grid reinforced inorganic-matrix composites10.1016/j.compositesb.2017.02.034 ↗
3. Mechanical characterization of different FRCM systems for structural reinforcement10.1016/j.conbuildmat.2017.04.051 ↗
4. ICC. AC434. Proposed Acceptance Criteria for Masonry and Concrete Strengthening Using Fibre-reinforced Cementitious Matrix (FRCM) and Steel Reinforced Grout (SRG) Composite Systems. Whittier, CA: ICC-Evaluation Service, 2016.
5. Linea Guida per la identificazione, la qualificazione ed il controllo di accettazione di compositi fibrorinforzati a matrice inorganica (FRCM) da utilizzarsi per il consolidamento strutturale di costruzioni esistenti. Published by the Italian Ministry of Public Works, 2019.
6. Fibre-to-mortar bond behaviour in TRM composites: effect of embedded length and fibre configuration10.1016/j.compositesb.2018.06.014 ↗
7. Experimental and numerical evaluation of fibre-matrix interface behaviour of different FRCM systems10.1016/j.compositesb.2018.12.115 ↗
8. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
9. Use of DIC technique for investigating the behaviour of FRCM materials for strengthening masonry elements10.1016/j.compositesb.2017.05.075 ↗
10. Tensile behaviour of a basalt TRM strengthening system: influence of mortar and reinforcing grid ratios10.1016/j.compositesb.2017.07.027 ↗
11. Application of digital image correlation to composite reinforcements testing10.1016/j.compstruct.2016.10.096 ↗
12. Comparison between different tensile test set-ups for the mechanical characterization of inorganic-matrix composites10.1016/j.conbuildmat.2018.03.041 ↗
13. Tensile behaviour of glass FRCM systems with fabrics’ overlap: experimental results and numerical modeling10.1016/j.compstruct.2019.01.053 ↗
14. G. Bramato, A. Cascardi, F. Micelli, M.A. Aiello. Tensile Characterization of Multi-Ply Fabric-Reinforced Cementitious Matrix. Proc. In: 3rd RILEM spring convention 2020 - Ambitioning A Sustainable Future For Built Environment: Comprehensive Strategies For Unprecedented Challenges, March 10-14 (2020). Guimarães, Portugal.
15. Tensile characterization of multi-ply fabric-reinforced cementitious matrix strengthening systems10.1002/suco.201900076 ↗
16. ISO 13934-1. Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method. CEN – European Committee for Standardization. April 2013.
17. EN 1015-11. Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar. 1999.
18. RILEM Technical Committee 232-TDT (Wolfgang Brameshuber) Mater Struct 2016, 49: 4923. doi:10. 1617/s115270160839z.10.1617/s11527-016-0839-z ↗
19. Performance assessment of basalt FRCM for retrofit applications on masonry10.1016/j.compositesb.2017.05.003 ↗
20. GOM GmbH. GOM Testing—Technical Documentation as of V8 SR1, Digital Image Correlation and Strain Computation Basics; GOM mbH: Braunschweig, Germany, 2016.
21. Tensile behaviour of mortar-based composites for externally bonded reinforcement systems10.1016/j.compositesb.2014.09.011 ↗
22. Testing procedures for the uniaxial tensile characterization of fabric-reinforced cementitious matrix composites10.1061/(ASCE)CC.1943-5614.0000626 ↗