journal article·2021-03

Treatment of date palm fibres mesh: Influence on the rheological and mechanical properties of fibre-cement composites

Tahar Ali-Boucetta, Amira Ayat, Walid Laifa, Mourad Behim

Publisher page

Abstract

Abstract An experimental study was conducted on the influence of different treatments of date palm fibres on the properties of mortars in both fresh and hardened states. Three types of treatment were discussed: boiling water treatment, sodium hydroxide treatment and a polymer surface treatment based on linseed oil. As a first step, tests of water absorption, setting times and direct tensile strength were performed on single fibres to assess the relevance of the predominant parameter for each treatment. Thereafter, unreinforced mortar and mortars reinforced with raw and treated date palm fibres were made and tested using a flow table test, as well as for porosity accessible to water, three-point bending strength, compressive strength and capillary water absorption. The results for individual fibres show that treatments with a 3-hour boiling of the fibres, a 3% NaOH concentration, and a 1.5% linseed oil/fibre ratio yield the lowest absorption kinetics, the shortest setting times, and the most interesting tensile properties. However, the results for fibrous composites indicate that the workability of mortars reinforced with linseed oil treated fibres was improved compared with raw fibres. In the hardened state, boiling and sodium hydroxide treatments improve the flexural strength of the composites. The same trend was observed for compressive strength. Therefore, the mortar reinforced by fibre treated with linseed oil does not improve the strength and is the most porous. The incorporation of date palm fibres decreases the kinetics of the capillary absorption of mortars compared to unreinforced mortar. The lowest absorption coefficients are obtained after the treatment with linseed oil.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Paris agreement, NATIONS UNIES, 2015, https://unfccc.int/files/essential_background/convention/application/pdf/english_paris_agreement.pdf.
2. Valorisation of date palm fibres in Sahara constructions10.1016/j.egypro.2015.07.608 ↗
3. Thermomechanical characterization of a bio-composite building material: mortar reinforced with date palm fibers mesh10.1016/j.conbuildmat.2016.12.217 ↗
4. Study on the durability of new construction materials based on mortar reinforced with date palm fibers wastes
5. Investigation of fiber surface treatment effect on thermal, mechanical and acoustical properties of date palm fiber-reinforced cementitious composites
6. The influence of date palm mesh fiber reinforcement on flexural and fracture behaviour of a cement-based mortar10.1016/j.compositesb.2018.07.017 ↗
7. Statistical optimization for the development of a culture medium based on the juice of waste-dates for growth of Lactococcus lactis LCL strain by using the plackett–burman and response surface Methodology10.1007/s12649-018-0283-0 ↗
8. Date palm wastes co-composted product: an efficient substrate for tomato (Solanum lycopercicum L.) seedling production10.1007/s12649-016-9767-y ↗
9. Combination of sodium hydroxide and lime as a pretreatment for conversion of date palm leaves into a promising ruminant feed: an optimization approach10.1007/s12649-014-9340-5 ↗
10. Activated carbon from date palm seed: process optimization using response surface methodology10.1007/s12649-011-9104-4 ↗
11. Characterization of natural fiber obtained from different parts of date palm tree (Phoenix dactylifera L.)10.1016/j.ijbiomac.2019.05.102 ↗
12. Enzyme-assisted isolation of microfibrillated cellulose from date palm fruit stalks10.1016/j.indcrop.2014.01.055 ↗
13. Mechanical properties of leaf sheath date palm fibre waste biomass reinforced polycaprolactone (PCL) biocomposites10.1016/j.indcrop.2018.10.044 ↗
14. Influence of different surface treatments on the water absorption capacity of flax fibres: rheology of fresh reinforced-mortars and mechanical properties in the hardened state10.1016/j.conbuildmat.2018.12.042 ↗
15. Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite10.1016/j.conbuildmat.2014.12.091 ↗
16. Mechanical properties of hemp fibre reinforced cement: influence of the fibre/matrix interaction10.1016/j.jeurceramsoc.2007.05.019 ↗
17. Impact of bleaching pine fibre on the fibre/cement interface10.1007/s10853-012-6271-z ↗
18. Improvement of mechanical properties of green concrete by treatment of the vegetals fibers10.1016/j.conbuildmat.2013.05.073 ↗
19. Influence of various chemical treatments on the composition and structure of hemp fibres10.1016/j.compositesa.2007.12.001 ↗
20. Effect of fiber chemical treatments on performance of date palm fibers using response surface methodology
21. Review on cellulosic fibers extracted from date palms (Phoenix Dactylifera L.) and their applications10.1007/s10570-019-02259-6 ↗
22. Optimizing the formulation of flax fiber-reinforced cement composites10.1016/j.conbuildmat.2013.12.038 ↗
23. Properties of cementitious mortars reinforced with natural fibers10.1080/01694243.2017.1290572 ↗
24. Characterization of treated date palm tree fiber as composite reinforcement10.1016/j.compositesb.2009.04.018 ↗
25. Investigation on interfacial adhesion of date palm/epoxy using fragmentation technique10.1016/j.matdes.2013.07.083 ↗
26. Optimization of flax shive-cementitious composites: impact of different aggregate treatments using linseed oil10.1016/j.indcrop.2014.07.041 ↗
27. Performance of “Agave Lecheguilla” natural fiber in Portland cement composites exposed to severe environment conditions10.1016/j.buildenv.2005.12.005 ↗
28. Biocomposites based on flax short fibres and linseed oil10.1016/j.indcrop.2010.11.015 ↗
29. Effects of aggregate coating on the hygral properties of lignocellulosic composites10.1016/j.cemconcomp.2010.10.017 ↗
30. NA 442-2003. Algerian Standard, Cement: Composition, specifications and conformity criteria for common cements, 2003.
31. NF EN 934-2+A2: Admixtures for concrete, mortar and grout - Part 2: concrete admixtures - Definitions, requirements, conformity, marking and labeling, 2012.
32. Influence of date palm fiber and shrinkage reducing admixture on self-compacting concrete performance at early age in hot-dry environment10.1016/j.conbuildmat.2017.07.229 ↗
33. NF EN 1015-6/A1: Methods of test for mortar for masonry - Part 6: determination of bulk density of fresh mortar, 2007.
34. NF EN 196-1: Methods of Testing Cement – Part 1: determination of Strength, 2016.
35. Magniont · 2010
36. NF P15-431: Hydraulic binders. Methods for testing cement. Setting test. Liants hydrauliques, 1994.
37. NF EN 1015-3/A2: Methods of test for mortar for masonry - Part 3: determination of consistence of fresh mortar (by flow table), 2007.
38. AFREM, Méthodes recommandées pour la mesure des grandeurs associées à la durabilité. Compte rendu des journées techniques AFPC-AFREM, Durabilité des bétons, 1997.
39. Caractérisation microstructurale des fibres naturelles pour des matériaux composites a base de ciment10.1139/L09-009 ↗
40. Studies of water absorption behavior of plant fibers at different temperatures10.1007/s10765-010-0774-0 ↗
41. Influence of sunflower aggregates surface treatments on physical properties and adhesion with a mineral binder10.1016/j.compositesa.2012.07.011 ↗
42. Degradation of Poplar Lignin by Hydrothermal Treatment
43. Autohydrolysis of aspen milled wood lignin10.1139/v80-102 ↗
44. A comparison between hot liquid water and steam fractionation of corn fiber10.1021/ie990831h ↗
45. Chemical composition of natural fibers and its influence on their mechanical properties10.1007/s11029-014-9422-2 ↗
46. Natural fibre-reinforced biofoams10.1155/2011/569871 ↗
47. Optimization of the alkali treatment process of date palm fibres for polymeric composites10.1163/156855407782106528 ↗
48. Chemical modification of rice husk surface through alkaline treatments10.1080/10667857.2005.11753103 ↗
49. Oil palm fibers: morphology, chemical composition, surface modification, and mechanical properties10.1002/(SICI)1097-4628(19971031)66:5<821::AID-APP2>3.0.CO;2-X ↗
50. Effect of calcium rich and alkaline solutions on the chemical behaviour of hemp fibres10.1007/s10853-007-1903-4 ↗
51. Treatments of plant biomass for cementitious building materials–a review10.1016/j.conbuildmat.2016.05.125 ↗
52. Modification of cement hydration at early ages by natural and heated wood10.1016/j.cemconcomp.2005.09.002 ↗
53. Building flax fibres: more than one brick in the walls10.1016/j.plaphy.2003.07.001 ↗
54. Saccharification of Miscanthus x giganteus, incorporation of lignocellulosic by-product in cementitious matrix10.1016/j.crvi.2011.07.008 ↗
55. The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites10.1016/S0266-3538(01)00046-X ↗
56. Improving degradation resistance of sisal fiber in concrete through fiber surface treatment10.1016/j.apsusc.2013.11.024 ↗
57. Importance of fiber preparation to optimize the surface and mechanical properties of unitary flax fiber10.1016/j.indcrop.2010.08.002 ↗
58. Green composites. I. Physical properties of ramie fibers for environment-friendly green composites10.1007/BF02875769 ↗
59. Mechanical properties of kenaf fibers and kenaf/PLA composites10.1016/j.mechmat.2007.10.006 ↗
60. Characterization of alkali-treated jute fibers for physical and mechanical properties10.1002/app.1184 ↗
61. Date palm fibers as polymeric matrix reinforcement: fiber characterization10.1002/pc.20118 ↗
62. Tensile and structural characterization of alkali treated Borassus fruit fine fibers10.1016/j.compositesb.2012.04.075 ↗
63. Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete10.1016/j.conbuildmat.2017.08.025 ↗
64. V. Zacharda, J. Němeček, P. Štemberk, Micromechanical performance of interfacial transition zone in fiber-reinforced cement matrix, IOP Conf. Ser.: Mater. Sci. Eng.246 (1) (2017) 012018, DOI:10.1088/1757-899X/246/1/012018.10.1088/1757-899X/246/1/012018 ↗
65. Plant fibre reinforced cement components for roofing10.1016/S0950-0618(99)00046-X ↗
66. Thermomechanical behavior of Tunisian palm fibers before and after alkalization10.1016/j.conbuildmat.2018.03.070 ↗
67. Durability of compression molded sisal fiber reinforced mortar laminates10.1016/j.conbuildmat.2008.10.012 ↗
68. Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites10.1016/S0958-9465(99)00039-6 ↗
69. The hornification of vegetable fibers to improve the durability of cement mortar composites10.1016/j.cemconcomp.2011.03.003 ↗
70. Development of vegetable fibre–mortar composites of improved durability10.1016/S0958-9465(02)00018-5 ↗
71. Selected properties of concrete containing palm fibers
72. Natural fiber-reinforced mortars