Improvement of poorly graded sandy soil by using copper mine tailing dam sediments-based geopolymer and silica fume
Source abstract
Abstract
Abstract Production and utilization of new material with acceptable mechanical properties and the least environmental costs have always been pursued. The presented research was conducted to contribute to achieving this goal. Geopolymers are new binders that are likely to outweigh Portland cement due to their excellent strength and low greenhouse gas emissions. In this research, sandy soil was stabilized using a geopolymer based on copper mine tailing dam sediments (CMTDS) with different contents (10%, 15%, 20%) in different concentrations of potassium hydroxide (1 M, 4 M, 7 M, 10 M). A partial amount of CMTDS was replaced with silica fume (5%, 10%, 15%) to improve the used geopolymer. The specimens were characterized by compression strength tests, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR). Moreover, the best mixture conditions and the most influential parameter on the enhancement of compressive strength were determined by applying the Taguchi method and analysis of variance (ANOVA). At the end, the TCLP test was conducted to investigate environmental concerns regarding the used materials. The results indicated that a geopolymer based on CMTDS could be utilized to improve soil's compressive strength efficiently without damaging the environment. Inclusion of silica fume in the mixtures considerably improved the strength and microstructural density of specimens. Finally, statistical analysis illustrated that potassium hydroxide concentration was the most influential parameter for the compressive strength of specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Microstructural and mechanical properties of marine soft clay stabilized by lime-activated ground granulated blastfurnace slag10.1016/j.clay.2014.11.005 ↗
2. Fundamental Characteristics of Cement-Admixed Clay in Deep Mixing10.1061/(ASCE)0899-1561(2006)18:2(161) ↗
3. Environmental impact analysis of blast furnace slag applied to ordinary Portland cement production10.1016/j.jclepro.2015.12.071 ↗
4. Experimental evaluation of sustainable geopolymer mortars developed from loam natural soil10.1080/13467581.2020.1773829 ↗
5. Carbon dioxide uptake by cement-based materials: A Spanish case study10.3390/app10010339 ↗
6. Stabilisation of marginal lateritic soil using high calcium fly ash-based geopolymer10.1080/14680629.2015.1132632 ↗
7. Potential of geopolymer technology towards green buildings and sustainable cities10.1016/j.proeng.2011.11.2108 ↗
8. Conversion of local industrial wastes into greener cement through geopolymer technology: A case study of high-magnesium nickel slag10.1016/j.jclepro.2016.09.147 ↗
9. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
10. Production of geopolymeric binder from blended waste concrete powder and fly ash10.1016/j.conbuildmat.2012.04.044 ↗
11. Geopolymerisation of multiple minerals10.1016/S0892-6875(02)00255-8 ↗
12. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
13. Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology10.1007/s10853-009-3497-5 ↗
14. Utilization of Copper Mine Tailings as Road Base Construction Material through Geopolymerization10.1061/(ASCE)MT.1943-5533.0002397 ↗
15. Stabilization/solidification of hazardous and radioactive wastes with alkali-activated cements10.1016/j.jhazmat.2006.05.008 ↗
16. Z. Li, Z. Ding, Y. Zhang, Development of sustainable cementitious materials, Proceedings of international workshop on sustainable development and concrete technology, Beijing, China, 2004, pp. 55-76.
17. Drechsler · 2005
18. Facile preparation of slag or fly ash geopolymer composite coatings with flame resistance10.1016/j.conbuildmat.2019.01.097 ↗
19. Experimental investigation of using a recycled glass powder-based geopolymer to improve the mechanical behavior of clay soils10.1016/j.conbuildmat.2018.03.049 ↗
20. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
21. Factors influencing strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2013.05.104 ↗
22. Using calcium carbide residue as an alkaline activator for glass powder–clay geopolymer10.1016/j.conbuildmat.2018.06.190 ↗
23. Xu, Effect of curing temperature and silicate concentration on fly-ash-based geopolymerization10.1021/ie051251p ↗
24. Effects of alkaline-activated fly ash and Portland cement on soft soil stabilisation10.1007/s11440-012-0200-9 ↗
25. Experimental feasibility study of geopolymer as the next-generation soil stabilizer10.1016/j.conbuildmat.2013.06.017 ↗
26. Structural performance of alkali-activated soil ash versus soil cement10.1061/(ASCE)MT.1943-5533.0001398 ↗
27. Soil stabilisation using alkaline activation of fly ash for self compacting rammed earth construction10.1016/j.conbuildmat.2012.06.037 ↗
28. H.A. Sultan, Stabilized copper mill tailings for highway construction, Transportation research record (734) (1979).
29. Alkali Activation of Copper Mine Tailings and Low-Calcium Flash-Furnace Copper Smelter Slag10.1061/(ASCE)MT.1943-5533.0001159 ↗
30. S. Ahmari, R. Chen, L. Zhang, Utilization of Mine Tailings As Road Base Material, GeoCongress 20122012, pp. 3654-3661.10.1061/9780784412121.374 ↗
31. Stabilization of soft kaolin clay with silica fume and lime10.1080/19386362.2016.1187884 ↗
32. Characteristics of clays stabilized with lime-silica fume mix10.3301/IJG.2014.36 ↗
33. Effects of using silica fume and lime in the treatment of kaolin soft clay
34. Improvement of bearing capacity of footing on soft clay grouted with lime-silica fume mix10.12989/gae.2015.8.1.113 ↗
35. Compressive strength and microstructure of fly ash based geopolymer blended with silica fume under thermal cycle10.1016/j.cemconcomp.2017.01.009 ↗
36. ASTM-D422-63, Standard Test Method for Particle-Size Analysis of Soils (D422-63), ASTM International, West Conshohocken, PA. doi 10 (2007).
37. ASTM-D2487, Standard practice for classification of soils for engineering purposes (unified soil classification system), West Conshohocken, PA, 2011
38. ASTM-D698, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 Ft-lbf/ft3 (600 KN-m/m3)) 1, ASTM international2007.
39. Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks10.1016/j.conbuildmat.2012.11.069 ↗
40. Combination of Biochar and Silica Fume as Partial Cement Replacement in Mortar: Performance Evaluation Under Normal and Elevated Temperature10.1007/s12649-018-00573-x ↗
41. Experimental investigation of stabilisation of soils with Taftan pozzolan10.1080/19648189.2018.1467345 ↗
42. Standard test method for unconfined compressive strength of cohesive soil
43. ASTM E1252-98, Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis, ASTM International.
44. Control and Stabilization of Fugitive Dust: Using Eco-Friendly and Sustainable Materials10.1061/(ASCE)GM.1943-5622.0001762 ↗
45. Optimizing the mixture design of polymer concrete: An experimental investigation10.1016/j.conbuildmat.2018.01.191 ↗
46. Laboratory study of the effects of using magnesium slag on the geotechnical properties of cement stabilized soil10.1016/j.conbuildmat.2019.07.011 ↗
47. E. US EPA, Method 1311. Toxicity characteristic leaching procedure, EPA SW-846: test methods for evaluating solid waste, physical/chemical methods (1992).
48. Synthesis and characterization of fly ash modified mine tailings-based geopolymers10.1016/j.conbuildmat.2011.04.005 ↗
49. Relationships between composition, structure and strength of inorganic polymers10.1007/s10853-005-1226-2 ↗
50. Effect of Alkali Metals on the Preferential Geopolymerization of Stilbite/Kaolinite Mixtures10.1021/ie010042b ↗
51. Production of eco-friendly bricks from copper mine tailings through geopolymerization10.1016/j.conbuildmat.2011.10.048 ↗
52. Fire-resistant geopolymer produced by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
53. Synthesis and mechanical properties of metakaolinite-based geopolymer10.1016/0927-7757(95)03490-0 ↗
54. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
55. ASTM-D4609, Standard guide for evaluating effectiveness of admixtures for soil stabilization, ASTM International, 2008.
56. Factors affecting the suitability of fly ash as source material for geopolymers10.1016/j.fuel.2009.09.012 ↗
57. The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
58. Geopolymer Chemistry and Applications. 4-th edition
59. Influence of Solids-to-liquid and Activator Ratios on Calcined Kaolin Cement Powder10.1016/j.phpro.2011.11.049 ↗
60. Synthesis of ferronickel slag-based geopolymers10.1016/j.mineng.2008.07.003 ↗
61. Use of analytical techniques for identification of inorganic polymer gel composition10.1007/s10853-010-4257-2 ↗
62. Disposition of water in metakaolinite based geopolymers10.1002/9781118407844.ch20 ↗
63. Effect of the silicate activator pH on the microstructural characteristics of waste-based geopolymers10.1016/S0301-7516(02)00013-3 ↗
64. Mechanical Properties of Alkali Activated Fly Ash Geopolymer Stabilized Expansive Clay10.1007/s12205-019-2251-z ↗
65. Evaluation of sustainable concrete paving blocks incorporating processed waste tea ash