journal article·2015-08

A study of the laboratory polishing behavior of granite as road surfacing aggregate

Dawei Wang, Xianhua Chen, Xiaoguang Xie, Helge Stanjek, Markus Oeser, Bernhard Steinauer

Publisher page

Abstract

Abstract Four sources of granite aggregates with different mineralogical properties were investigated. They were formed into test plates with a flat surface and polished with the Aachen Polishing Machine using quartz powder and quartz sand as the polishing agent respectively. Changes of the texture were studied on the basis of both texture measurements and skid resistance measurements measured by the Pendulum Test and the Wehner/Schulze device. By comparison of the four granites, the influence of mineral composition and crystal size on micro-texture and skid resistance changes of the aggregates is determined. The polishing and wearing resistance can be described with functions of the mineralogical parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tunneling and Rock Mechanics · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV), Merkblatt zur Bewertung der Straßengriffigkeit bei Nässe (M BGriff), FGSV Verlag, Köln, Ausgabe, 2012.
2. D. J. Wilson, An Analysis of the Seasonal and Short-Term Variation of Road Pavement Skid Resistance, Department of Civil and Environmental Engineering, The University of Auckland, 2006.
3. Qualification of wearing course material surface evolution after durability test10.1016/j.conbuildmat.2012.02.081 ↗
4. Study of the skid resistance of blends of coarse aggregates with different polish resistances10.1016/j.conbuildmat.2013.07.040 ↗
5. S. Huschek, D. P. Merzoug, Zusammenhang zwischen Rauheit und Griffigkeit, Forschung Straßenbau und Straßenverkehrstechnik, Heft 735, 1996.
6. Fractal and spectral analysis of aggregate surface profile in polishing process10.1016/j.wear.2011.05.024 ↗
7. Long-term skid resistance of asphalt surfacings: correlation between Wehner-Schulze friction values and the mineralogical composition of the aggregates10.1016/j.wear.2013.03.022 ↗
8. B. Steinauer, D. W. Wang, H. Stanjek et al., Erhöhung der Verkehrssicherheit durch gute Griffigkeitswerte während der gesamten Gebrauchsdauer von hochbelasteten Straßen, Forschung Straßenbau und Straßenverkehrstechnik, Heft 1070, Bundesministerium für Verkehr, Bau und Stadtentwicklung, Wirtschaftsverlag NW, Verlag für neue Wissenschaft GmbH, Bonn, 2012.
9. Evolution of road-surface skid resistance and texture due to polishing10.1016/j.wear.2008.04.060 ↗
10. Three-dimensional characterization of surface texture for road stones undergoing simulated traffic wear10.1016/j.wear.2012.05.010 ↗
11. Evolution of aggregate surface microtexture due to tyre-polishing10.1007/s11771-011-0688-4 ↗
12. Pavement polishing – development of a dedicated laboratory test and its correlation with road results10.1016/j.wear.2006.12.086 ↗
13. Physical model for the prediction of pavement polishing10.1016/j.wear.2008.11.012 ↗
14. D.J. Maclean, F. A. Shergold, The Polishing of Roadstone in Relation to the Resistance to Skidding of Bituminous Road Surfacing, Department of Scientific and Industrial Re-search, Road Research Laboratory, Road Research Technical Paper No. 43, London, 1958.
15. Z.Z. Tang, Polishing and skid-resistance of road pavements, PhD thesis (in French) of ENPC (EcoleNationale des PontsetChaussées), LCPC, 2007.
16. Experimental-based model for predicting the skid resistance of asphalt pavements10.1080/10298436.2011.643793 ↗
17. Influence of different polishing conditions on the skid resistance development of asphalt surface10.1016/j.wear.2013.09.013 ↗
18. S. Bald, V. Rosauer, Modelling the ups and downs of the skid resistance of road surfaces, 6th Symposium on Pavement Surface Characteristics (SURF 2008), Darmstadt, 2008.
19. Developing a model for estimation of polished stone value (PSV) of road surface aggregates based on petrographic parameters
20. M. Zieger, Polishing test, Part III, Road Engineering Research No. 385, Federal Ministry of Economical Affairs of Austria, Vienna (in German), 1980.
21. Petrological aspects of the polishing of natural roadstones10.1002/jctb.5010100108 ↗
22. Factors influencing PM10 emissions from road pavement wear10.1016/j.atmosenv.2008.04.028 ↗
23. Size and composition of airborne particles from pavement wear, tires, and traction sanding10.1021/es035419e ↗
24. The effect of mineralogy, texture and mechanical properties of anti-skid and asphalt aggregates on urban dust, stages II and III10.1007/s10064-004-0267-0 ↗
25. Influence of freeze-thaw on the polishing resistance of coarse aggregates on road surface10.1016/j.conbuildmat.2014.04.006 ↗
26. Study of micro-texture and skid resistance change of granite slabs during the polishing with the Aachen Polishing Machine10.1016/j.wear.2014.06.005 ↗
27. Tire-road contact stiffness10.1007/s11249-014-0417-x ↗
28. On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion
29. A contribution to non-contact skid resistance measurement