journal article·2015-08Open access

Effect of shrinkage-reducing admixture on biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete

Doo-Yeol Yoo, Jihwan Kim, Goangseup Zi, Young-Soo Yoon

Abstract

Abstract This study aims to investigate the effect of shrinkage-reducing admixture (SRA) on the mechanical properties of ultra-high-performance fiber-reinforced concrete (UHPFRC). Three different SRA to cement weight ratios (0%, 1%, and 2%) were considered using the UHPFRC including 2% of smooth steel fibers by volume. The specimen without SRA exhibited the best performance in almost all aspects of the mechanical behaviors in compression, fiber pullout, and biaxial flexure including load carrying capacity, strain capacity, and energy absorption capacity (pullout energy and toughness). The mechanical performances deteriorated with the increase in the amount of SRA up to 2%. Finally, a suggestion was made to define the first cracking point of deflection-hardening UHPFRC under biaxial flexure stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete Properties and Behavior · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Federal Highway Administration (FHWA). Material property characterization of ultra high performance concrete. Federation Highway Administration Report, US Department of Transportation, VA; 2006.
2. di Prisco M, Lamperti M, Lapolla S, Khurana RS. HPFRCC thin plates for precast roofing. In: Proceedings of the second international symposium on ultra high performance concrete. Kassel, Germany; March, 2008. p. 675–82.
3. Ultra-high-performance concrete bridge deck reinforced with high-strength steel
4. Kobler M, Sobek W. The introduction of high forces into tine-walled UHPC elements by the use of implants. In: Proceedings of the second international symposium on ultra high performance concrete. Kassel, Germany; March, 2008. p. 683–90.
5. Strain-hardening UHP-FRC with low fiber contents10.1617/s11527-010-9650-4 ↗
6. Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete10.1016/j.conbuildmat.2012.12.015 ↗
7. The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)10.1016/j.cemconres.2011.05.009 ↗
8. Shrinkage properties of ultra-high performance concrete (UHPC)10.1166/asl.2011.1505 ↗
9. Drying shrinkage cracking characteristics of ultra-high-performance fibre reinforced concrete with expansive and shrinkage reducing agents10.1680/macr.12.00069 ↗
10. Shrinkage reduction of high strength fiber reinforced cementitious composites (HSFRCC) with various water-to-binder ratios10.1016/j.cemconcomp.2011.03.009 ↗
11. Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age10.1617/s11527-010-9670-0 ↗
12. Combined effect of expansive and shrinkage-reducing admixtures on the properties of ultra high performance fiber-reinforced concrete10.1177/0021998313493809 ↗
13. Influence of ring size on the restrained shrinkage behavior of ultra high performance fiber reinforced concrete10.1617/s11527-013-0119-0 ↗
14. Cracking behavior of concrete with shrinkage reducing admixtures and PVA fibers10.1016/j.cemconcomp.2009.08.004 ↗
15. Effect of mixture composition on restrained shrinkage cracking of self-consolidating concrete used in repair
16. Effect of shrinkage reducing admixture on flexure behaviors of fiber reinforced cementitious composites10.1016/j.cemconcomp.2011.12.004 ↗
17. Improvement of the biaxial flexure test method for concrete10.1016/j.cemconcomp.2012.11.001 ↗
18. Kim DJ, El-Tawil S, Naaman AE. Correlation between single fiber pullout behavior and tensile response of FRC composites with high strength steel fiber. In: Cachan SARL, editor. Proceedings of the fifth international workshop of high performance fiber reinforced cementitious composites, RILEM proceedings, Pro. 53. France; July 2007. p. 67–76.
19. Tensile characteristics evaluation method for ductile fiber-reinforced cementitious composites10.3151/jact.4.3 ↗
20. Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites10.1016/j.compstruct.2013.07.033 ↗
21. A novel indirect tensile test method to measure the biaxial tensile strength of concretes and other quasibrittle materials10.1016/j.cemconres.2008.02.002 ↗
22. ASTM C 1550-12a. Standard test method for flexural toughness of fiber-reinforced concrete (using centrally loaded round panel). American Society of Testing and Materials; 2012.
23. Park JJ, Kang ST, Koh KT, Kim SW. Influence of the ingredients on the compressive strength of UHPC as a fundamental study to optimize the mixing proportion. In: Second international symposium on ultra high performance concrete. Kassel, Germany; 2008. p. 105–12.
24. ASTM C 39. Standard test method for compressive strength of cylindrical concrete specimens. American Society of Testing and Materials; 2012.
25. Pullout behavior of high-strength steel fibers embedded in ultra-high-performance concrete
26. Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength10.1617/s11527-009-9562-3 ↗
27. Yoo DY. Performance enhancement of ultra-high-performance fiber-reinforced concrete and model development for practical utilization [Ph.D. thesis]. Seoul, Korea: Korea University; 2014. 586 p.
28. ASTM C 469M-10. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. American Society of Testing and Materials; 2010.
29. Timoshenko · 1959
30. Compressive behavior of ultra-high-performance fiber-reinforced concrete
31. Popovics · 1998
32. ASTM C 1018-97. Standard test method for flexural toughness and first-crack strength of fiber reinforced concrete (using beam with third-point loading). American Society of Testing and Materials; 1998.
33. Proposed classification of HPFRC composites based on their tensile response10.1617/s11527-006-9103-2 ↗
34. Influence of steel fibers and fiber reinforced polymers on the impact resistance of one-way concrete slabs10.1177/0021998313477167 ↗