journal article·2015-09

Effect of Coal Combustion Products on high temperature performance of asphalt mastics

Emil G. Bautista, Justin Flickinger, Rajan Saha, Ismael Flores-Vivian, Ahmed F. Faheem, Konstantin Sobolev

Publisher page

Abstract

Abstract For many years fly ash has been effectively used as a partial replacement of portland cement in the production of different types of concrete, as well as in embankments and soil stabilization. On the other hand, the use of Coal Combustion Products (CCPs) in asphalt pavements has been very limited. Few researchers investigated the application of CCPs in asphalt. This research reports on the effect of CCPs on the high temperature performance of asphalt binders. In this paper 15 CCPs were identified, characterized and investigated for their compatibility with different types of asphalt cement and compared to control mineral filler. Furthermore, the study explored the effect of dosage, physical properties and chemical composition of CCP on the stiffness, phase angle and rutting behavior of mastics. The investigation of the rheological performance of asphalt binders with different types of CCPs using Dynamic Shear Rheometer (DSR) confirmed the feasibility of using these by-products to improve the permanent deformation resistance of asphalt binders. Research data demonstrate that the effect of the CCPs is dependent on the dosage and physical and chemical properties of CCP. Based on the rheological response of CCP based mastics at high temperatures this study found a strong physical and chemical interaction between the CCP and the asphalt binder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Mechanistic evaluation of fly ash asphalt concrete mixtures10.1061/(ASCE)0899-1561(1996)8:1(19) ↗
2. Effect of Jordanian oil shale fly ash on asphalt mixes10.1061/(ASCE)0899-1561(2005)17:5(553) ↗
3. Investigation of Stone Matrix Asphalt Mortars10.1177/0361198196153000112 ↗
4. J.G. Cabrera, S. Zoorob, Design of low energy hot rolled asphalt, in: Proceedings of the 1st European Symposium, University of Leeds, Leeds, UK, 1994, pp. 289–308.
5. A comparative study of fillers in asphaltic concrete
6. Engineering Overview (visited April 20, 2015). National Asphalt Pavement Association (NAPA). http://www.asphaltpavement.org/index.php?option=com_content&view=article&id=14&Itemid=33.
7. Every day counts (visited April 20, 2015). Federal Highway Administration (FHWA). http://www.fhwa.dot.gov/everydaycounts/.
8. A.F. Faheem, C. Hintz, H.U. Bahia, Test Methods and Specification Criteria for Mineral Filler Used in HMA, NCHRP 9–45 Final Report, 2011.
9. A.F. Faheem, Conceptual phenomenological model for interaction of asphalt binders with mineral fillers (Doctoral dissertation), University of Wisconsin Madison, 2009.
10. Modeling of asphalt mastic in terms of filler–bitumen interaction10.1080/14680629.2010.9690335 ↗
11. Flickinger, et al., Characterization of CCPs for application in concrete, 2015. (Submitted to Waste Materials).
12. N.E. Henning, Evaluation of lignite fly ash as a mineral filler in asphaltic concrete, Twin City Testing and Engineering Laboratory, St. Paul, Minn. Report No. 2(73), 1974.
13. Montgomery · 2011
14. Richardson · 1905
15. The influence of the quality of filler in asphaltic paving mixtures
16. K. Sobolev, T.R. Naik, Performance as a factor for sustainability of the cement industry, in: Proceedings of CANMET/ACI International Symposium on Sustainable Development of Cement and Concrete, Toronto, Canada, 2005, pp. 295–312.
17. K. Sobolev, I. Flores, N.M. Wasiuddin (Wasi), The Use of Fly Ash as Filler in Asphalt Cement: Phase I, Final Report, UWM-We Energies, 2011, 17 pp.
18. The effect of fly ash on the rheological properties of bituminous materials10.1016/j.fuel.2013.07.123 ↗
19. K. Sobolev, I. Flores, J.D. Bohler, A. Faheem, A. Covi, Application of fly ash in ASHphalt concrete: from challenges to opportunities, in: Proceedings of World of Coal Ash Conference, 2013.
20. A.R.S. Suheibani, The use of fly ash as an asphalt extender (Ph.D. dissertation), University of Michigan, Ann Arbor, 1986.
21. Improved asphalt aggregate mix properties by portland cement modification10.1139/L07-082 ↗
22. E. Tons, et al., Fly ash as an asphalt reducer in bituminous base courses, Report prepared by the University of Michigan, The Board of Water and Light, Consumer Power Co. and Detroit Edison Co., Detroit, Michigan, 1983.
23. Evaluation of mineral filler in terms of practical pavement performance
24. F.V. Zimmer, Fly ash as bituminous filler, in: Proceedings of the 2nd Ash Utilization Symposium, Pittsburgh, Department of Interior, Bureau of Mines, 1970.