journal article·2012-09

Early-age creep deformation of a high strength self-compacting concrete

Lino Maia, Joaquim Figueiras

Publisher page

Abstract

Abstract The age of loading and the stress level are important parameters in the precast/prestress industry as they are related to the time of each production cycle, as well as to the concrete deformation. For this reason, a study about the influence of the age of loading and the stress level on the deformation of a self-compacting concrete with a mix composition typically used in the prefabrication of prestressed bridge girders was performed. This concrete develops 60 MPa within 24 h. Its deformation was evaluated at the stress-to-strength ratio of 30% for six stages of loading at the ages of 12, 16, 20, 24, 48 and 72 h. At the age of 12 and 24 h, deformation was also evaluated at the stress-to-strength ratios of 20% and 40%. Loaded specimens were kept under constant stress during at least 600 days in a climatic chamber with a temperature and a relative humidity of 20 °C and 50%, respectively. Deformation in non-loaded specimens was also measured to determine shrinkage and calculate creep deformation. Results are compared with the predictions provided by the Eurocode 2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Cements of yesterday and today: concrete of tomorrow10.1016/S0008-8846(00)00365-3 ↗
2. Early-age loading and long-term deflections of reinforced concrete beams
3. Effects of high construction loads on the long-term deflections of flat slabs
4. Experimental study on creep and durability of high-early-strength self-consolidating concrete for precast elements
5. Shrinkage and creep of SCC – the influence of paste volume and binder composition10.1016/j.conbuildmat.2010.11.019 ↗
6. Creep of concrete as a function of its cement paste content10.1680/macr.1964.16.46.21 ↗
7. Neville · 1971
8. Influence of paste volume on shrinkage cracking and fracture properties of self-compacting concrete10.1016/j.cemconcomp.2007.03.010 ↗
9. Shrinkage and restrained shrinkage cracking of self-compacting concrete compared to conventionally vibrated concrete10.1617/s11527-008-9367-9 ↗
10. fib Bulletin 55: Model Code 2010, First complete draft – Volume 1; March 2010.
11. Degree of hydration based Kelvin model for the basic creep of early age concrete10.1007/BF02479595 ↗
12. The influence of age at time of loading on basic and drying creep10.1016/0008-8846(73)90100-2 ↗
13. Tensile basic creep of early-age concrete under constant load10.1016/S0008-8846(01)00691-3 ↗
14. Creep and shrinkage revisited
15. Early age deformation and resultant induced stress in expansive high strength concrete10.3151/jact.2.155 ↗
16. Tensile creep at early ages of ordinary, silica fume and fiber reinforced concretes10.1016/0008-8846(95)00102-I ↗
17. The influence of loading age and temperature on the long term creep behaviour of concrete in a sealed, moisture stable, state
18. Creep of Portland cement paste at early ages
19. Creep and shrinkage prediction model for analysis and design of concrete structures – model B3
20. JSCE, editor. Standard specification for concrete structures – 2002 materials and construction. Tokyo: Japan Society of Civil Engineers; 2005.
21. ACI Committee 209, editor. Prediction of creep, shrinkage and temperature effects in concrete structures (209R-92). Farmington Hills: American Concrete Institute; 1990.
22. EN 1992-1-1:2004 – Eurocode 2: Design of concrete structures – Part 1–1: General rules and rules for buildings; 2004.
23. Neville · 1983
24. Comment on recent analysis of concrete creep linearity and applicability of principle of superposition10.1007/BF02473429 ↗
25. Tensile creep of high-strength concrete10.3151/jact.4.277 ↗
26. Time-dependent deformations of limestone powder type self-compacting concrete10.1016/j.engstruct.2008.04.009 ↗
27. ASTM C 469. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. American Society for Testing and Materials, Philadelphia, PA, 2002.
28. EN 1097-6:2000 – Tests for mechanical and physical properties of aggregates – Part 6: determination of particle density and water absorption; 2000.
29. Maia L, Figueiras H, Nunes S, Figueiras J. Avaliação do estado fresco, retracção e calor de hidratação de argamassas para BAC branco com metacaulino. In: Barros J, Sena-Cruz J, Ferreira RM, Camões A, editors. Actas do bac2010-2° Congresso Ibérico, Betão Auto-compactável. Guimarães, Portugal; 2010. p. 63–4 [Ed. CD-ROM: 8 page].
30. EN 12350-8:2010. Testing fresh concrete – Part 8: Self-compacting concrete – Slump-flow test; 2010.
31. EN 12350-9:2010. Testing fresh concrete – Part 9: Self-compacting concrete – V-funnel test; 2010.
32. EN 12350-10:2010. Testing fresh concrete – Part 10: Self-compacting concrete – L box test; 2010.
33. EN 12350-11:2010. Testing fresh concrete – Part 11: Self-compacting concrete – Sieve segregation test; 2010.
34. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
35. Cement hydration in the presence of high filler contents10.1016/j.cemconres.2005.03.008 ↗
36. Modeling the influence of limestone filler on cement hydration using CEMHYD3D10.1016/j.cemconcomp.2005.10.006 ↗
37. Influence of cementitious paste composition on E-modulus and heat of hydration evolutions10.1016/j.cemconres.2011.03.008 ↗