Adhesive bonding of fire-resistive engineered cementitious composites (ECC) to steel
Source abstract
Abstract
Recent research has demonstrated the feasibility of developing a fire-resistive engineered cementitious composite (FR-ECC) to address the current issue of lack of durability (adhesion and cohesion) of spray-applied fire-resistive materials (SFRM) on steel structures. FR-ECC was shown to possess inherently better cohesive properties over conventional SFRM, facilitated by its relatively high tensile strength and ductility. This paper aims at tailoring the FR-ECC for enhanced adhesion and characterizing its adhesive property to steel substrate. Specifically, an acrylic latex bonding agent was used as admixture in FR-ECC and as an interfacial adhesive, and a fracture mechanics based adhesion test method was adopted to quantify the change in adhesive property. Based on the measured adhesion between latex modified FR-ECC matrix and steel, using latex as admixture and interfacial adhesives effectively improved the interfacial adhesive energy of FR-ECC matrix by 54% and 147%, respectively, compared to unmodified one. Environmental scanning electron microscopy revealed changes in composition and microstructure of the interfacial transition zone (ITZ) between latex modified FR-ECC matrix and steel, which resulted in the higher adhesive bond. The effect of latex addition on the mechanical performance of FR-ECC was also studied and discussed in this paper.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Prediction of tensile strain capacity of mass concrete
2. On engineered cementitious composites (ECC) – a review of the material and its applications10.3151/jact.1.215 ↗
3. Zhang Q, Ranade R, Li VC. Feasibility study on fire-resistive engineered cementitious composites. ACI Mater J; 2014 [in press].10.14359/51686830 ↗
4. Role of insulation effectiveness on fire resistance of steel structures under extreme loading events
5. ASTM E736-00: standard test method for cohesion/adhesion of sprayed fire-resistive materials applied to structural members. West Conshohocken (PA): ASTM International; 2011. doi: http://dx.doi.org/10.1520/E0736-00R11. .10.1520/E0736-00R11 ↗
6. An adhesion test method for spray-applied fire-resistive materials10.1002/fam.1050 ↗
7. A materials science-based approach to characterizing fire resistive materials10.1520/JAI102203 ↗
8. Bond strength development between latex-modified cement paste and steel10.1016/0008-8846(87)90129-3 ↗
9. Effects of poly(vinyl alcohol) on fiber cement interfaces. Part I: Bond stress–slip response10.1016/1065-7355(94)90042-6 ↗
10. Experimental study on properties of polymer-modified cement mortars with silica fume10.1016/S0008-8846(01)00626-3 ↗
11. Improving the bond strength between steel rebar and concrete by ozone treatment of rebar and polymer addition to concrete10.1016/S0008-8846(97)00057-4 ↗
12. Factors affecting ceramic tile adhesion for external cladding10.1016/S0950-0618(99)00023-9 ↗
13. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars10.1016/j.cemconres.2004.06.039 ↗
14. Influence of polymer type on adhesion performance of a blended cement mortar10.1016/j.ijadhadh.2013.01.007 ↗
15. Su · 1995
16. Chandra · 1994
17. Structure and properties of poly(vinyl alcohol)-modified mortar and concrete10.1016/S0008-8846(98)00246-4 ↗
18. Recent trends in research and development activities of polymer-modified paste, mortar and concrete in Japan10.4028/www.scientific.net/AMR.687.26 ↗
19. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composites (PVA-ECC)
20. A new micromechanics design theory for pseudo strain hardening cementitious composite10.1061/(ASCE)0733-9399(1999)125:4(373) ↗
21. Li VC. Engineered cementitious composites – tailored composites through micromechanical modeling. In: Banthia N, Bentur A, Mufti A, editors. Fiber reinforced concrete: present and the future. Canadian Society for Civil Engineering, Montreal, Quebec, Canada; 1998. p. 64–97.
22. Ohama Y. Handbook of polymer-modified concrete and mortars: properties and process technology. William Andrew; 1995.10.1016/B978-081551373-5.50013-1 ↗
23. Ramakrishnan V. Properties and applications of latex-modified concrete. In: Malhotraed VM, editor. Advances in concrete technology. 2nd ed. Canada Centre for Mineral and Energy Technology; 1994. p. 839–90.
24. Polymer-based admixtures10.1016/S0958-9465(97)00065-6 ↗
25. Mechanical properties of polymer-modified lightweight aggregate concrete10.1016/S0008-8846(01)00678-0 ↗
26. Influences of polymer fiber and polymer latex on physical properties of cement mortar10.4028/www.scientific.net/AMR.306-307.814 ↗
27. ASTM Standard C109: standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens). Philadelphia, PA; 2002.
28. JSCE: recommendations for design and construction of high. Performance fiber reinforced cement composites with multiple fine cracks (HPFRCC), March; 2008.
29. Mindess S, Young F, Darwin D. Concrete. 2nd ed.; 2003.
30. Struble L. Microstructure and fracture at the cement paste–aggregate interface. In: Proceedings of symposium on bonding in cementitious composites, vol. 114. Materials Research Society, Pittsburgh; 1988. p. 11–20.10.1557/PROC-114-11 ↗
31. A microstructural approach to adherence mechanism of poly (vinyl alcohol) modified cement systems to ceramic tiles10.1016/j.cemconres.2006.11.011 ↗
32. Effect of polyvinyl alcohol on aggregate–paste bond strength and the interfacial transition zone10.1016/S1065-7355(98)00009-1 ↗
33. Mindess S. “How important is it” bonding in cementitious composites. Materials Research Society, Pittsburgh; 1988. p. 3–10.10.1557/PROC-114-3 ↗
34. Influence of polymer modification on the hydration of Portland cement10.1016/0008-8846(91)90004-2 ↗
35. Zhang X, Groves GW, Rodger SA. The microstructure of cement aggregate interfaces. In: Bonding in cementitious composites. Materials Research Society, Pittsburgh; 1988. p. 89–95.10.1557/PROC-114-89 ↗
36. UFGS-07 81 00: spray-applied fireproofing, February; 2011.
37. ICC-ES, AC23: acceptance criteria for spray-applied and intumescent mastic coating fire-protection materials; 2011.
38. Wang S, Li VC. Tailoring of pre-existing flaws in ECC matrix for saturated strain hardening. In: Proceedings of FRAMCOS-5, Vail, Colorado, USA; 2004. p. 1005–12.