journal article·2015-02

Transport of water through strain-hardening cement-based composite (SHCC) applied on top of cracked reinforced concrete slabs with and without hydrophobization of cracks – Investigation by neutron radiography

Christof Schröfl, Viktor Mechtcherine, Anders Kaestner, Peter Vontobel, Jan Hovind, Eberhard Lehmann

Publisher page

Abstract

Abstract Composite specimens of steel-reinforced concrete (RC) strengthened with strain-hardening cement-based composite (SHCC) were characterized according to their water uptake and drying kinetics by neutron radiography imaging. The specimens were cracked in well-defined patterns, and some cracks were hydrophobized at the RC/SHCC interface. Qualitative and quantitative image evaluation revealed that capillary suction was very intense; within 1.2 min the cracks in both SHCC and RC filled with water completely, deep into the interior. Capillary transport through the matrices followed and led to moisture distribution throughout the body up to an elapsed time of 27 h. When drying, only macro-sized cracks emptied within about 1 h. Up until 46 h the original water frontier progressed further into the matrix. In parallel the specimen dried from its bottom face. Hydrophobization of cracked areas prior to application of SHCC proved a highly efficient measure to inhibit long-term ingress of water deep into the structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Geophysical Methods and Applications · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Durability of strain-hardening cement-based composites (SHCC)10.1617/s11527-012-9845-y ↗
2. Novel cement-based composites for the strengthening and repair of concrete structures10.1016/j.conbuildmat.2012.11.117 ↗
3. On engineering cementitious composites (ECC): a review of the material and its applications10.3151/jact.1.215 ↗
4. Towards a durability framework for structural elements and structures made of or strengthened with high-performance fibre-reinforced composites10.1016/j.conbuildmat.2011.12.072 ↗
5. Evaluation of crack opening performance of a repair material with strain hardening behavior10.1016/j.cemconcomp.2008.08.003 ↗
6. Strain hardening cement-based composites for repair layers on cracked concrete surfaces
7. Design of a neutron radiography facility at the spallation source SINQ10.1016/0168-9002(96)00106-4 ↗
8. High-speed neutron radiography for monitoring the water absorption by capillarity in porous materials10.1016/j.nimb.2007.10.030 ↗
9. Water transport through cement-based barriers – a preliminary study using neutron radiography and tomography10.1016/j.nima.2009.01.146 ↗
10. Neutron radiography determination of water diffusivity in fired clay brick10.1016/j.apradiso.2008.11.014 ↗
11. Quantification of water penetration into concrete through cracks by neutron radiography10.1016/j.nima.2009.01.206 ↗
12. Investigation of moisture phase change in porous media using neutron radiography and gravimetric analysis10.1016/j.ijheatmasstransfer.2010.07.030 ↗
13. Use of neutron radiography and tomography to visualize the autonomous crack sealing efficiency in cementitious materials10.1617/s11527-012-9887-1 ↗
14. Time resolved analysis of water drainage in porous asphalt concrete using neutron radiography10.1016/j.apradiso.2013.01.040 ↗
15. Visualization and quantification of liquid water transport in softwood by means of neutron radiography10.1016/j.ijheatmasstransfer.2012.06.045 ↗
16. Visualizing moisture release and migration in gypsum plaster board during and beyond dehydration by neutron radiography10.1016/j.ijheatmasstransfer.2013.01.039 ↗
17. Time-dependent moisture distribution in drying cement mortars – results of neutron radiography and inverse analysis of drying tests
18. Neutron imaging of water penetration into cracked steel reinforced concrete10.1016/j.physb.2010.01.065 ↗
19. Observation and quantification of water penetration into strain hardening cement-based composites (SHCC) with multiple cracks by means of neutron radiography10.1016/j.nima.2010.04.119 ↗
20. Neutron radiography, a powerful method to determine time-dependent moisture distributions in concrete10.1016/j.nucengdes.2011.02.031 ↗
21. Capillary transport of water through textile-reinforced concrete applied in repairing and/or strengthening cracked RC structures10.1016/j.cemconres.2013.05.012 ↗
22. Water movement in porous building materials – I. Unsaturated flow theory and its applications10.1016/0360-1323(77)90040-3 ↗
23. Water movement in porous building materials – XIII. Absorption into a two-layer composite10.1016/0360-1323(94)00035-Q ↗
24. Water movement in porous building materials – XIV. Absorption into a two-layer composite (SA<SB)10.1016/0360-1323(94)00036-R ↗
25. The absorption of water into a porous solid consisting of two dissimilar layers10.1111/j.1365-2389.1997.tb00187.x ↗
26. Anomalous water absorption in porous materials10.1088/0022-3727/36/6/320 ↗
27. Transient moisture transport in cracked porous medium10.1007/BF00622445 ↗
28. Numerical simulation on moisture transport in cracked cement-based materials in view of self-healing of crack10.1007/s11595-010-0153-5 ↗
29. Modeling of water permeability in early aged concrete with cracks based on micro pore structure10.1016/j.conbuildmat.2011.07.002 ↗
30. Water movement in porous building materials – VI. Evaporation and drying in brick and block materials10.1016/0360-1323(84)90009-X ↗
31. Drying of porous building materials: hydraulic diffusivity and front propagation10.1007/BF02481524 ↗
32. Evaporative drying in stabilised compressed earth materials using unsaturated flow theory10.1016/j.buildenv.2009.07.003 ↗
33. Characterization of fracture patterns and hygric properties for moisture flow modelling in cracked concrete10.1016/j.conbuildmat.2012.02.047 ↗
34. Moisture loss characteristics of cement-based materials under early-age drying and shrinkage conditions10.1016/j.conbuildmat.2011.11.015 ↗
35. Coupled strain rate and temperature effects on the tensile behavior of strain-hardening cement-based composites (SHCC) with PVA fibers10.1016/j.cemconres.2012.08.011 ↗
36. DIN EN 197-1 (11/2011). Cement – Part 1: Composition, specifications and conformity criteria for common cements. German version.
37. ASTM C618-12a. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. West Conshohocken (PA): ASTM International; 2012.
38. DIN EN 206-1 (07/2001). Concrete – Part 1: Specification, performance, production and conformity. German version.
39. DIN EN ISO 15148 (03/2003). Hygrothermal performance of building materials and products – determination of water absorption coefficient by partial immersion (ISO 15148:2002). German version.
40. Rasband WS. ImageJ (1997–2012) downloaded 2013, incl. plugins for image referencing developed and provided by members of Paul Scherrer Institut, Villigen/Aargau, Switzerland.
41. Scattering corrections in neutron radiography using point scattered functions10.1016/j.nima.2005.01.159 ↗
42. Methods of scattering corrections for quantitative neutron radiography10.1016/j.nima.2005.01.161 ↗