Monitoring setting and hardening of concrete by active acoustic method: Effects of water-to-cement ratio and pozzolanic materials
Source abstract
Abstract
Abstract An active acoustic method is used to monitor the setting and hardening of early age concrete, by recording and analyzing the wave velocity and attenuation coefficient. The effects of water-to-cement ratio and pozzolanic materials (fly ash and silica fume) are examined. The central frequency of the acoustic excitation is 6 kHz, which is much lower than that of ultrasound and can enhance the signal-to-noise ratio when applied to very early age concrete. It was found that the wave velocity measurement can reveal clearly three stages in the hydration process of early age concrete, and an aluminate hydrates phase transition period can be defined based on the attenuation coefficient measurement. Lower water-to-cement ratio and the incorporation of more silica fume facilitate a faster development of both wave velocity and attenuation coefficient, and achieve higher one-day wave velocity values, showing their accelerating effects. The incorporation of fly ash postpones the development of both wave velocity and attenuation coefficient, and achieves lower one-day wave velocity values, showing its retardation effect. The attenuation coefficients of all concretes tend to converge to the same value, i.e. 4 Np/m.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation · Seismic Waves and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Setting time study of roller compacted concrete by spectral analysis of transmitted ultrasonic signals10.1016/0963-8695(94)00006-6 ↗
2. Ultrasonic in-situ monitoring of setting process of high-performance concrete10.1016/j.cemconres.2003.10.012 ↗
3. Continuous monitoring of setting and hardening of mortar and concrete10.1016/j.conbuildmat.2003.10.002 ↗
4. Comparison of ultrasonic wave transmission and reflection measurements with P- and S-waves on early age mortar and concrete10.1007/BF02479285 ↗
5. Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation10.1016/j.cemconres.2004.09.004 ↗
6. Hydration monitoring of cement-based materials with resistivity and ultrasonic methods10.1617/s11527-008-9363-0 ↗
7. Ultrasound monitoring of setting and hardening process of ultra-high performance cementitious materials10.1016/j.ndteint.2009.10.006 ↗
8. Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates10.1088/0964-1726/22/8/085025 ↗
9. Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixture concrete10.1016/j.cemconres.2004.04.017 ↗
10. Concrete early-age strength monitoring using embedded piezoelectric transducers10.1088/0964-1726/15/6/038 ↗
11. Monitoring of the strength gain of concrete using embedded PZT impedance transducer10.1016/j.conbuildmat.2011.04.020 ↗
12. Using piezoelectric sensors for ultrasonic pulse velocity measurements in concrete10.1088/0964-1726/22/11/115016 ↗
13. Effectiveness of nonlinear ultrasonic and acoustic emission evaluation of concrete with distributed damages10.1016/j.matdes.2010.03.020 ↗
14. Non-linear ultrasonic evaluation of damaged concrete based on higher order harmonic generation10.1016/j.matdes.2009.05.009 ↗
15. Efficiency and sensitivity of linear and non-linear ultrasonics to identifying micro and macro-scale defects in concrete10.1016/j.matdes.2013.03.079 ↗
16. Ultrasonic monitoring of the early age hydration of mineral admixtures incorporated concrete using cement-based piezoelectric composite sensors10.1177/1045389X14525488 ↗
17. Study on hydration process of early-age concrete using embedded active acoustic and non-contact complex resistivity methods10.1016/j.conbuildmat.2013.04.032 ↗
18. Cement-based 0–3 piezoelectric composites10.1111/j.1151-2916.2002.tb00089.x ↗
19. Signal-based AE characterization of concrete with cement-based piezoelectric composite sensors10.12989/cac.2011.8.5.563 ↗
20. Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers10.1088/0964-1726/21/4/047001 ↗
21. Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers10.1088/0964-1726/21/4/047001 ↗
22. Signal-based acoustic emission monitoring on mortar with cement-based piezoelectric sensors
23. Li · 2011
24. Ye G. Experimental study and numerical simulation of the development of the microstructure and permeability of cementitious materials [Doctoral dissertation]. Technical University of Delft.; 2003.
25. Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity10.1016/j.cemconres.2008.04.006 ↗
26. Monitoring fresh concrete by ultrasonic transmission measurements: exploratory multi-way analysis of the spectral information10.1016/j.chemolab.2008.08.005 ↗
27. Realistic pore structure of Portland cement paste: experimental study and numerical simulation10.12989/cac.2013.11.4.317 ↗
28. Study on the development of the microstructure in cement-based materials by means of numerical simulation and ultrasonic pulse velocity measurement10.1016/S0958-9465(03)00081-7 ↗
29. Multi-aggregate approach for modeling interfacial transition zone in concrete
30. Propagation of ultrasound through hydrating cement pastes at early times10.1016/1065-7355(93)90004-8 ↗
31. Xiao LZ, Interpretation of hydration process of concrete based on electrical resistivity measurement [Doctoral dissertation]. The Hong Kong University of Science and Technology; 2007.
32. Two-scale modeling of the capillary network in hydrated cement paste10.1016/j.conbuildmat.2014.04.005 ↗
33. Taylor · 1997
34. Neville · 1996
35. Ma H, Multi-scale modeling of the microstructure and transport properties of contemporary concrete [Ph.D. thesis]. Hong Kong: The Hong Kong University of Science and Technology; 2013.
36. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
37. Ultrasonic transmission to monitor setting and hardening of fly ash concrete
38. The reaction of fly ash in concrete: a critical examination10.1016/0008-8846(89)90088-4 ↗
39. Study on water sorptivity of the surface layer of concrete10.1617/s11527-013-0162-x ↗