journal article·2009-09

Influence of fibrous additives on properties of aerated autoclaved concrete forming mixtures and strength characteristics of products

A. Laukaitis, J. Kerienė, D. Mikulskis, M. Sinica, G. Sezemanas

Publisher page

Abstract

Abstract The influence of fibrous additives of non-hydrophilized and hydrophilized carbon, polypropene, basalt and kaoline fibre on properties of aerated autoclaved concrete (AAC) forming mixture, as well as on properties of final product was investigated. All these fibrous additives, both non-hydrophilized and hydrophilized, have effect on fluidity and swelling of forming mixtures and increase plastic strength. Along with growing content of each fibrous additive within limits from 0.1% to 0.4% of mass of solid components, the fluidity and swelling of forming mixtures decreases, while the plastic strength increases. All investigated fibrous additives, both hydrophilized and non-hydrophilized, increase the compression- and flexural strengths of AAC. The optimal content of all fibrous additives to be added for obtaining of greatest compression- and flexural strengths is 0.3% counting of dry material in the forming mixture. By capacity to increase the compression- and binding strengths, the fibrous additives may be lined up in the following order: carbon fibre > polypropene fibre > basalt fibre > kaoline fibre. All fibrous additives increase flexural strength more than that of compression. Hydrophilized fibres increase compression- and flexural strengths of concrete more than the respective non-hydrophilized ones. Basing on the results of investigations performed as to fibre-reinforced AAC structure by scanning electron microscope, as well as on the results of earlier performed investigations with fibres used for reinforcement to find out their chemical resistance to treatment of them in the autoclave by alkaline solutions, the pH value of which corresponds to that of hardening alkaline binding medium of concretes, the influence of properties of fibrous additives on efficiency of reinforcement was explained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Structural mechanics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Investigation of electromagnetic wave absorber based on carbon fiber reinforced aerated concrete using time-domain method10.12693/APhysPolA.113.1047 ↗
2. Using fibres to enchance the properties of concrete columns10.1016/j.conbuildmat.2005.06.028 ↗
3. Effect of different fibres on the mechanical properties of concrete containing fly ash10.1016/j.conbuildmat.2006.06.026 ↗
4. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
5. The influence of binding materials composition and fibrous additives on the properties of porous concrete
6. Fiber-reinforced concrete: an overview after 30 years of development10.1016/S0958-9465(96)00046-7 ↗
7. Romualdi JP, Batson GB. Mecanics ao crack arrest in concrete. In: Proceedings of ASCE; 1963. p. 147–68.10.1061/JMCEA3.0000381 ↗
8. Tensile strength of concrete affected by uniformly distributed closely spaced short lengths of vire reinforcement
9. Fibrous reinforcement for Portland cement
10. Theory of multiple fracture of fibrous composites10.1007/BF00550155 ↗
11. Properties of concrete reinforced with fibrillated polypropylene fibres under impact loading10.1016/0008-8846(88)90127-5 ↗
12. Do fibres increase the tensile strength of cement based mixtures?
13. Properties of polypropylene fiber concrete
14. Pullout behavior of polypropylene fibers from cementitious matrix10.1016/j.cemconres.2004.02.014 ↗
15. Statistical analysis of impact strength and strength reliability of steel–polypropylene hybrid fiber-reinforced concrete10.1016/j.conbuildmat.2004.05.002 ↗
16. Microstructural analysis of the bond mechanism between polyolefin fibers and cement pastes10.1016/j.cemconres.2004.05.046 ↗
17. Improving the interface bond between fiber mesh and cementitious matrix10.1016/S0008-8846(02)00715-9 ↗
18. Fracture properties of concrete reinforced with steel–polypropylene hybrid fibres10.1016/S0958-9465(00)00033-0 ↗
19. Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction10.1016/S0008-8846(02)00913-4 ↗
20. Improving the tensile properties of carbon fiber reinforced cement by ozone treatment of the fiber10.1016/0008-8846(96)00141-X ↗
21. Improving the bond strength between carbon fiber and cement by fiber surface treatment and polymer addition to cement mix10.1016/0008-8846(96)00084-1 ↗
22. Carbon fiber reinforced cement improved by using silane-treated carbon fibers10.1016/S0008-8846(99)00015-0 ↗
23. Effect of carbon fibres on the mechanical properties and corrosion levels of reinforced Portland cement mortars10.1016/j.cemconres.2004.05.013 ↗
24. Rheology of low carbon fibre content reinforced cement mortar10.1016/j.cemconcomp.2006.06.004 ↗
25. Some characteristics of high strength fiber reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
26. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres10.1016/S0008-8846(03)00222-9 ↗
27. Properties of fresh polypropylene fibre reinforced concrete under the influence of pozzolans10.1080/13923730.2003.10531339 ↗
28. Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement10.1016/j.cemconres.2004.11.013 ↗
29. High-temperature behaviour of HPC with polypropylene fibres: from spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
30. Mechanical properties and microstructure of high strength concrete containing polypropylene fibres exposed to temperatures up to 200°C10.1016/j.cemconres.2005.03.007 ↗
31. Studies on expansion properties in mortar containing waste glass and fibres10.1016/j.cemconres.2003.12.005 ↗
32. Strength properties of nylon- and polypropylene–fiber-reinforced concretes10.1016/j.cemconres.2004.06.033 ↗
33. Properties of ceramic fiber reinforced cement composites10.1016/j.cemconres.2004.05.017 ↗
34. Effects of alkali-resistant glass fiber reinforcement on crack and temperature resistance of lightweight concrete10.1016/S0958-9465(01)00038-5 ↗
35. Reinforcement influence on non-autoclaved cement concrete strength characteristics10.3846/13921525.2000.10531583 ↗
36. The alkali and temperature resistance of some fibres
37. Mineral wool fibre corrosion in alkaline solution