journal article·2013-04

Comparison of performance of stone matrix asphalt mixtures using basalt and limestone aggregates

Weidong Cao, Shutang Liu, Zhigang Feng

Publisher page

Abstract

Abstract The main objective of this study was to compare the performance of three kinds of stone matrix asphalt (SMA) mixtures (using basalt coarse and fine aggregates, named B-SMA; limestone coarse and fine aggregates, named L-SMA; basalt coarse aggregates and limestone fine aggregates, named BL-SMA). The results indicated that B-SMA shows the best rutting resistance, followed by BL-SMA and L-SMA comes in last. However, in terms of low temperature performance of resistance to cracking and moisture susceptibility, they have the reverse sequence. The aggregate type has a significant effect on rutting resistance, but no significant difference in low temperature cracking susceptibility or moisture susceptibility was found in SMA mixtures. Also, master curves of dynamic modulus for three SMA mixtures were constructed and B-SMA shows the highest dynamic modulus, while L-SMA shows the smallest dynamic modulus at each frequency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Stone mastic asphalt reduces rutting
2. Fatigue behavior of SMA and HMA mixtures10.1016/j.conbuildmat.2009.12.025 ↗
3. Shen · 1999
4. A laboratory study on stone matrix asphalt using ground tire rubber10.1016/j.conbuildmat.2006.02.005 ↗
5. Using waste plastic bottles as additive for stone mastic asphalt
6. Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt10.1016/j.conbuildmat.2012.06.015 ↗
7. Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles10.1016/j.conbuildmat.2012.02.054 ↗
8. Utilization of waste fibers in stone matrix asphalt mixtures10.1016/j.resconrec.2004.04.005 ↗
9. Mechanistic approach for fiber and polymer modified SMA mixtures10.1016/j.conbuildmat.2012.05.032 ↗
10. Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact10.1016/j.conbuildmat.2008.05.009 ↗
11. Use of basalt in asphalt concrete mixes10.1016/j.conbuildmat.2007.10.026 ↗
12. JTG E42-2005 · 2005
13. JTG F40-2004 · 2004
14. Estimation of optimum asphalt content range of hot mix asphalt in objective mix design
15. JTG E20-2011 · 2011
16. American Association of State Highway and Transportation Officials (AASHTO). AASHTO TP62: Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt (HMA), Washington DC, USA, 2007.
17. Rutting as a function of dynamic modulus and gradation10.1061/(ASCE)MT.1943-5533.0000309 ↗
18. Hong · 2009
19. A predictive equation for dynamic modulus of asphalt mixtures used in Korea10.1016/j.conbuildmat.2009.10.008 ↗