journal article·2014-12

Effects of aggregate gradation and polymer modifiers on properties of cement-EPS/vitrified microsphere mortar

Xiaonan Dong, Shoude Wang, Chenchen Gong, Lingchao Lu

Publisher page

Abstract

Abstract Cement-EPS/vitrified microsphere (VM) mortar (shortened as CEV mortar) was prepared by sulphoaluminate cement, EPS and VM aggregates. Moreover, the effects of polymer modifiers (i.e. air-entraining agent, emulsified asphalt and redispersible latex powder) on the mechanical properties, water absorption and drying shrinkage of CEV mortar were investigated. The experimental results showed that the optimal ratio of RVM (VM to total insulation aggregates ratio) was 0.65. In addition, the compressive strength of CEV mortar was 1.65 MPa, dry density was reduced by 25% to 350 kg/m3, and thermal conductivity was lowered by 30% to 0.065 W/(m k) when the dosage of air-entraining agent was 0.2%. Furthermore, compared with redispersible latex powder, emulsified asphalt could make CEV mortar with lower water absorption, lower pressure off ratio, lower drying shrinkage and more stable softening coefficient. But redispersible latex powder could increase the viscosity of the cement paste to improve mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Strength and durability of lightweight concrete10.1016/S0958-9465(02)00141-5 ↗
2. Characteristics of lightweight concrete containing mineral admixtures10.1016/j.conbuildmat.2010.07.025 ↗
3. Kinetics and volatile products of thermal degradation of building insulation materials10.1016/j.tca.2012.07.020 ↗
4. Intumescence: an effect way to flame retardance and smoke suppression for polystyrene10.1016/j.polymdegradstab.2012.05.013 ↗
5. Manufacture of lignocellulosic fiber-cement boards containing foaming agent10.1016/j.conbuildmat.2012.03.007 ↗
6. The compressive properties of closed-cell aluminum foams with different Mn additions10.1016/j.matdes.2013.05.008 ↗
7. Thermal insulating foamy geopolymers from perlite10.1016/j.mineng.2010.07.015 ↗
8. Impact response of lightweight mortars containing expanded perlite10.1016/j.cemconcomp.2012.10.004 ↗
9. Low flammability, foam-like materials based on ammonium alginate and sodium montmorillonite clay10.1016/j.polymer.2012.10.029 ↗
10. An investigation on the fresh properties of self-compactedlightweight concrete containing expanded polystyrene10.1016/j.conbuildmat.2011.04.018 ↗
11. Characterization and simulation of microstructure and properties of EPS lightweight concrete10.1016/j.cemconres.2007.08.028 ↗
12. Mechanical properties ofexpanded polystyrene lightweight aggregate concreteand brick10.1016/j.conbuildmat.2011.08.030 ↗
13. Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete10.1016/j.cemconcomp.2006.02.018 ↗
14. The effect of foam polystyrene granules on cement composite properties10.1016/j.cemconcomp.2003.09.004 ↗
15. Properties of hardened concrete containing treated expanded polystyrene aggregates10.1016/0958-9465(94)90039-6 ↗
16. Performance of cement mortar made with recycled high impact polystyrene10.1016/j.cemconcomp.2012.06.014 ↗
17. Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash10.1016/j.conbuildmat.2012.02.049 ↗
18. Properties of lightweight expanded polystyrene concrete reinforced with steel fiber10.1016/j.cemconres.2003.12.014 ↗
19. Properties of lightweight expanded polystyrene aggregate concretes fly ash10.1016/j.cemconres.2004.11.015 ↗
20. Mechanical and drying shrinkage properties of structural-graded polystyrene aggregate concrete10.1016/j.cemconcomp.2008.01.002 ↗
21. Mechanical properties of polymer-modified concretes containing expanded polystyrene beads10.1016/j.conbuildmat.2005.08.001 ↗
22. Composition and reaction mechanism of cement–asphalt mastic10.1016/j.conbuildmat.2009.02.014 ↗
23. Effect of early cement hydration on the chemical stability of asphalt emulsion10.1016/j.conbuildmat.2013.01.009 ↗
24. Effect of emulsifier on cement hydration in cement asphalt mortar10.1016/j.conbuildmat.2013.04.044 ↗
25. Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms10.1016/j.conbuildmat.2013.05.048 ↗