Prediction model for the time-varying corrosion rate of rebar based on micro-environment in concrete
Source abstract
Abstract
Abstract The corrosion rate of rebar in concrete is time dependent, and calculation of this rate is very important in predicting corrosion cracking and the corresponding service life of the rebar. In the present paper, the controlling factors of the corrosion rate of rebar in concrete under atmospheric environment were first analyzed, and conclusion for joint control of cathode and anode activation polarizations was drawn. Based on the corrosion dynamic equations under activation polarization control, an electrochemical fundamental model for the corrosion rate of rebar was established. Then, based on this model and the test results on the corrosion of rebar in concrete and the resistivity of concrete under artificial climate environment, a prediction model for the corrosion rate of rebar was presented comprehensively, which takes into account the effects of the concrete’s micro-environment and corrosion time. Finally, feasibility of the prediction model was verified through comparisons between the predicted and measured values both under artificial and natural climate environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Influence of the degree of pore saturation on the resistivity of concrete and the corrosion rate of steel reinforcement10.1016/0008-8846(93)90102-F ↗
2. The influence of internal relative humidity on the rate of corrosion of steel embedded in concrete and mortar10.1016/0008-8846(94)90122-8 ↗
3. Experiment research on corrosion of reinforcement in concrete through cathode-to-anode area ratio
4. Predeterminate model of corrosion rate of steel in concrete10.1016/j.cemconres.2004.10.005 ↗
5. Modeling the dynamic corrosion process in chloride contaminated concrete structures10.1016/S0008-8846(98)00259-2 ↗
6. Model for predicting steel corrosion rates of concrete rebar over time
7. Corrosion process of steel bar in concrete in full lifetime
8. Effect of corrosion layer of steel bar in concrete on time-variant corrosion rate10.1617/s11527-008-9464-9 ↗
9. Steel corrosion in concrete: determinist modeling of cathodic reaction as a function of water saturation degree10.1016/j.corsci.2006.10.005 ↗
10. The role of rusts in corrosion and corrosion protection of iron and steel10.1016/j.corsci.2008.03.008 ↗
11. Kaesche · 2003
12. A practical method for calculating the corrosion rate of uniformly depassivated reinforcing bars in concrete10.1002/maco.200604010 ↗
13. Multi-scale modeling of concrete performance integrated material and structural mechanics10.3151/jact.1.91 ↗
14. Computer-aided oxygen transport model of mass and energy simulation for corrosion of reinforced steel10.1016/j.autcon.2010.11.022 ↗
15. Research on electrical resistivity of concrete and its application in durability appreciation of reinforced concrete
16. Time-varying model of steel corrosion in concrete
17. Quantitative models of climate load and its effect in concrete structure10.1016/j.conbuildmat.2011.10.045 ↗
18. Climate load model-climate action spectrum for predicting durability of concrete structure10.1016/j.conbuildmat.2011.10.034 ↗