Durability related transport properties of OPC and slag cement mortars hardened under different environmental conditions
Source abstract
Abstract
Abstract In this work, the durability performances of mortars made with an ordinary Portland cement and a slag cement, were tested. These mortars were exposed to four different constant temperature and relative humidity during 365 days. The measured properties of both cement types are affected by the environment, but the durability of slag cement mortars is more influenced by temperature and the durability of OPC mortars is more influenced by the relative humidity. The obtained results show that the slag cement mortars hardened under non-optimal environmental conditions have good durability at any hardening age, even better than Portland cement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Improvement of the chloride ingress resistance of OPC mortars by using spent cracking catalyst10.1016/j.cemconres.2008.11.006 ↗
2. Sánchez I, López MP, Climent MA. Effect of fly ash on chloride transport through concrete: study by impedance spectroscopy. In: Beaudoin JJ, Makar JM, Raki L, editors. Durability and degradation of cement systems: corrosion and chloride transport, T4.04-4, Proceedings of the 12th international congress on the chemistry of cement, Montreal: National Research Council of Canada; 2007.
3. Water vapour sorption experiments on hardened cementitious materials: part I: essential tool for analysis of hygral behaviour and its relation to pore structure10.1016/j.cemconres.2006.11.019 ↗
4. Impedance spectroscopy: an efficient tool to determine the non-steady-state chloride diffusion coefficient in building materials10.1002/maco.201005775 ↗
5. Benefits of slag and fly ash10.1016/0950-0618(95)00014-3 ↗
6. A study of basic engineering properties of slag cement concrete and its resistance to sea water corrosion10.1016/S0008-8846(98)00117-3 ↗
7. Durability properties of concrete containing 50% and 65% slag10.1016/j.conbuildmat.2009.02.040 ↗
8. Influence of blast furnace cements on durability of concrete structures
9. Performance of slag concrete in marine environment
10. Manmohan D, Mehta PK. Influence of pozzolanic, slag and chemical admixtures on pore size distribution and permeability of hardened cement pastes. Cement, concrete, and aggregates; 1981. vol. 3. p. 63–7.10.1520/CCA10203J ↗
11. Effect of curing conditions on the mortars with and without GGBFS10.1016/j.conbuildmat.2006.08.013 ↗
12. Influence of curing conditions on the mechanical properties and durability of cement mortars
13. Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fume10.1016/0958-9465(95)00005-W ↗
14. Ortega JM, Sanchez I, Climent MA. Influence of environmental conditions on the durability properties of slag cement mortars. In: Zachar J, Claisse P, Naik TR, Ganjian E, editors. Proceedings of the 2nd international conference on sustainable construction materials and technologies, Ancona: UWM center for by-products utilization; 2010. p. 277–87.
15. Asociación Española de Normalización y Certificación. Norma UNE-EN 197-1 (only available in Spanish). Madrid, Spain, 2000, equivalent to the European standard EN 197-1; 2000.
16. Asociación Española de Normalización y Certificación. Norma UNE-EN 196-1 (only available in Spanish). Madrid, Spain, 2005, equivalent to the European standard EN 196-1; 2005.
17. Deutsches Institut für Normung e.V. Deutsche Norm DIN 50 008 part 1. Berlin, Germany; 1981.
18. Asociación Española de Normalización y Certificación. Proyecto de norma PrUNE 83.982. Madrid, Spain; 2007 (only available in Spanish).
19. Rilem recommendation TC 116-PCD. Permeability of concrete as a criterion of its durability. Mater Struct; 1999. vol. 32. p. 174–9.
20. Andrade C, Alonso C, Arteaga A, Tanner P. Methodology based on the electrical resistivity for the calculation of reinforcement service life. In: Malhotra VM, editor. Proceedings of the 5th CANMET/ACI international conference on durability of concrete, supplementary papers, Barcelona: American Concrete Institute; 2000. p. 899–915.
21. Impedance spectroscopy study of hardened portland cement paste10.1016/S0008-8846(02)00720-2 ↗
22. American Society for Testing Materials (ASTM). ASTM standard C1202-97: standard test method for electrical indication of concrete’s ability to resist chloride ion penetration; 1997.
23. Nordtest. NT Build 492. Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady-state migration experiments. Espoo, Finland; 1999.
24. Resistance to chloride intrusion of concrete cured at different temperatures
25. Effect of shrinkage and moisture content on the physical characteristics of blended cement mortars10.1016/S0008-8846(98)00120-3 ↗
26. Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
27. Chern JC, Chan YW. Effect of temperature and humidity conditions on the strength of blast furnace slag cement concrete. ACI Sp Publication; 1989. vol. 114–67. p. 1377–97.
28. Neville · 1995
29. Drying shrinkage of cement-based materials under conditions of constant temperature and varying humidity10.1016/S1006-1266(07)60119-9 ↗
30. Effects of curing conditions on properties of concrete using slag replacement10.1016/S0008-8846(00)00200-3 ↗
31. Effect of calcium formate as an accelerator on the physicochemical and mechanical properties of pozzolanic cement pastes10.1016/j.cemconres.2003.11.015 ↗
32. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗