Extensive statistical analysis of the variability of concrete rebound hardness based on a large database of 60 years experience
Source abstract
Abstract
Abstract Non-destructive testing methods for concrete structures require statistical validation of reliability model parameters. Present paper studies a comprehensive database of several thousand test locations for the better understanding of the statistical characteristics of rebound hardness of concrete and highlights that several gaps are found both in current technical literature and standardisation. Detailed evaluation is provided on repeatability and influencing parameters. Results of statistical analyses are presented for the within-test standard deviation, coefficient of variation, range and studentized range of rebound indices. Indications for the reconsideration of particular statements in the technical literature and standards are given.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Probabilistic and Robust Engineering Design · Infrastructure Maintenance and Monitoring · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. An experimental study on the within-member variability of in situ concrete strength in RC building structures10.1016/j.conbuildmat.2013.05.102 ↗
2. ACI · 2002
3. Recommendations for the treatment of the variations of concrete strength in codes of practice10.1007/BF02473890 ↗
4. Fib Bulletin 3. Structural concrete – textbook on behaviour. Design and Performance. Fédération internationale du béton (fib). 1999; 3: p. 247–248.
5. On the dispersion of data collected by in situ diagnostic of the existing concrete10.1016/j.conbuildmat.2013.05.001 ↗
6. Statistical methods to evaluate in-place test results
7. Neville AM. Properties of Concrete. Pitman, London: 1981. 532 p.
8. Influence of cold weather during casting and curing on the stiffness and strength of concrete10.1016/j.conbuildmat.2013.03.016 ↗
9. Model for the quantitative description of the kinetics of hardening of portland cements10.1016/0008-8846(87)90045-7 ↗
10. Factors determining the correlations between high strength concrete properties10.1016/j.conbuildmat.2010.11.005 ↗
11. Fischer-Cripps · 2000
12. Rebound surface hardness of concrete: Introduction of an empirical constitutive model10.1016/j.conbuildmat.2010.11.070 ↗
13. Szilágyi K, Borosnyói A, Zsigovics I. Understanding the rebound surface hardness of concrete. Journal of Civil Engineering and Management, Manuscript ID SCEM-2012-0173.R3. 2013. (in press).
14. 50years of experience with the Schmidt rebound hammer
15. ACI. In-Place Methods to Estimate Concrete Strength ACI 228.1R-03. American Concrete Institute; Farmington Hills, Michigan: 2003.
16. Malhotra · 2004
17. Bungey · 2006
18. Static indentation hardness testing of concrete: a long established method revived
19. Nondestructive evaluation of concrete strength: an historical review and a new perspective by combining NDT methods10.1016/j.conbuildmat.2011.12.103 ↗
20. 2012
21. Breysse, D., Fernández, J. L. M. (2013) “Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions”, Materials and Structures, July 2013, online article, 10.1617/s11527-013-0139-9.10.1617/s11527-013-0139-9 ↗
22. OECD Glossary of statistical terms. Organisation for Economic Co-operation and Development. 2008. 605 p.
23. Kolaiti E, Papadopoulos Z. Evaluation of Schmidt rebound hammer testing: a critical approach. Bulletin of the International Association of Engineering Geology, vol. 48. Paris: 1993. pp. 69–76.10.1007/BF02594977 ↗
24. Talabér J, Borján J, Józsa Zs. Preliminaries to the standardization of non-destructive tests in concrete technology. Bulletin of the BME Department of Building Materials, vol. 29. Budapest: 1979. 112 p. (in Hungarian).
25. The use of the Schmidt Hammer and Equotip for rock hardness assessment in geomorphology and heritage science: a comparative analysis10.1002/esp.2040 ↗
26. Simulation-based finite sample normality tests in linear regressions10.1111/1368-423X.11009 ↗
27. Power comparisons of Shapiro–Wilk, Kolmogorov–Smirnov, Lilliefors and Anderson–Darling tests
28. BME Introduction of the non-destructive testing methods to the quality assurance system of the 31 AEV precast company. Research Report No. 206030, Budapest University of Technology, Department of Building Materials, Budapest; November 1981. 110 p.
29. CEN EN 13791:2007. Assessment of in-situ compressive strength in structures and precast concrete components. European Standard. 2007.
30. CEN EN 12504–2:2012. Testing concrete in structures – Part 2: non-destructive testing – determination of rebound number. European Standard. 2012.
31. ISO ISO 1920–7:2004. Testing of concrete - Part 7: non-destructive tests on hardened concrete. International Standard. 2008.
32. DIN DIN EN 13791:2008–05 Bewertung der Druckfestigkeit von Beton in Bauwerken oder in Bauwerksteilen; Deutsche Fassung EN 13791:2007. German Standard. 2008.
33. Manns W, Zeus K. Die nachträgliche Bestimmung der Betondruckfestigkeit. Betonwerk + Fertigteil-Technik. 1977; 43(8): p. 410–417.
34. CEN/TC 104/SC1 N 295:1998. Assessment of in-situ compressive strength in structures and concrete components. Unpublished manuscript.
35. ASTM · 2013
36. La precision de l’estimation de la résistance du béton au moyen de l’indice sclérométrique10.1007/BF02473589 ↗
37. ACI In-place methods to estimate concrete strength. ACI 228.1R-89. American Concrete Institute; Farmington Hills, Michigan: 26 p.
38. Within-test variability of some non-destructive methods for concrete strength determination10.1680/macr.1990.42.153.245 ↗
39. Early-stage inspection of concrete quality in structures by combined nondestructive method10.1617/s11527-005-9007-6 ↗
40. ISO. ISO 3534–1:2006, Statistics – vocabulary and symbols – Part 1: probability and general statistical terms. International Standard.
41. ASTM · 2013
42. Tables of range and studentized range10.1214/aoms/1177705684 ↗
43. On compressive strength variation in concrete10.1007/BF02479129 ↗
44. Shimizu Y, Hirosawa M, Zhou J. Statistical analysis of concrete strength in existing reinforced concrete buildings in Japan. In: Proceedings 12WCEE 2000: 12th World Conference on Earthquake Engineering, January 30 – February 4, 2000, Auckland, New Zealand: 2000. No. 1499. p. 1–8.
45. CEN EN 12390–3:2009. Testing hardened concrete– Part 3: compressive strength of test specimens. European Standard. 2009.
46. 2001
47. Some estimates on the variability of material properties
48. Student Errors of Routine Analysis. Biometrika. 1927; 19(1–2): p. 151–164.10.1093/biomet/19.1-2.151 ↗