Evaluation of internal resistance in hot-mix asphalt (HMA) concrete
Source abstract
Abstract
Abstract Accurate quantification of aggregate properties is essential for understanding their influence on hot-mix asphalt (HMA) concrete and for selecting aggregates to produce high-quality paving mixture. The objectives of this study are to develop a method to measure internal resistance in HMA mixtures and to evaluate the effect of different gradations on the rutting of mixes. Analysis showed that a HMA mix could be made more resistant to rutting by specifying an adequate range of the fine aggregate passing through the 4.75-mm (No. 4) sieve. The lower the fine aggregate percentage, the greater the difference between the coarse aggregate void volume and the total volume of fines. This indicated that the aggregate interlocking greatly occurred in the coarse aggregate. The image evaluation of aggregate morphological characteristic demonstrated that a stable aggregate skeleton resulted in more internal resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Influence of aggregate type and gradation on voids of asphalt concrete pavement10.1061/(ASCE)0899-1561(1998)10:2(76) ↗
2. A national study of rutting in asphalt pavement
3. Effects of some aggregate and filler characteristics on behavior and durability of asphalt paving mixtures10.3141/1530-10 ↗
4. Evaluation of particle shape and texture of mineral aggregate and their blends
5. Morphological study of coarse aggregates using image analysis10.1061/(ASCE)0899-1561(1998)10:3(135) ↗
6. Kim · 1992 · 310
7. Coarse aggregate effects on elastic moduli of concrete10.3141/1547-05 ↗
8. Effect of aggregate shape on bituminous mix characteristics
9. The effect of aggregate gradation on permanent deformation of asphaltic concrete
10. Particle index evaluation of aggregates for asphalt paving mixtures
11. Evaluation of stone-on-stone contact in stone-matrix asphalt
12. Method to ensure stone-on-stone contact in stone matrix asphalt paving mixtures10.3141/1583-02 ↗
13. Peformance of hot mix asphalt using coarse and skip graded aggregates10.1061/(ASCE)0899-1561(1996)8:2(101) ↗
14. Structural analysis of aggregate blends using Strategic Highway Research Program Gyratory Compactor10.3141/1545-11 ↗
15. Frequency distribution of void ratio of granular materials determined by an image analyzer10.3208/sandf1972.30.1 ↗
16. Image analysis evaluation of aggregates for asphalt concrete mixtures10.3141/1615-09 ↗
17. An innovative digital image analysis approach to quantify the percentage on voids in mineral aggregates of bituminous mixtures10.1139/l98-034 ↗
18. Quantification of particle shape and angularity using the image analyzer10.1520/GTJ10574J ↗
19. Application of digital image processing to quantitative study of asphalt concrete microstructure
20. Kennedy TW, Hubber GA, Harrigan ET, Cominsky RJ, Hughes CS, Quintus HV, Moulthrop JS, Superior performing asphalt pavements, Report No. SHRP-A-410, Strategic Highway Research Program, Washington, D.C., 1994.