Impacts of water content on rheological properties and performance-related behaviors of foamed warm-mix asphalt
Source abstract
Abstract
Abstract It has been shown from existing studies that foamed Warm Mix Asphalt (WMA) can effectively improve the workability of asphalt mixtures at relatively low temperature. However, there is limited research into the influence of the amount of water used to foam WMA on the rheological properties and performance-related characteristics of the foamed asphalt. In this study, different amount of water was used to foam non-modified and styrene–butadiene–styrene triblock copolymer (SBS) modified bitumen to create foamed bitumen specimens. They were subsequently tested for high temperature performance, low temperature performance, temperature sensitivity, and fatigue resistance properties. Test results indicate that water content in the foamed asphalt has significant impacts on its various properties and there is an interactive effect between asphalt type and water content. In general, it appears that better results can be achieved if one per cent of water is used to foam the unmodified asphalt, and three per cent of water is used to foam the modified asphalt. The findings may assist controlling experimental variations and improving foamed WMA production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Drilling and Well Engineering · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Hurley G, Prowell B. Evaluation of Aspha-Min® for use in warm mix asphalt. NCAT report 05-04, Auburn; 2005.
2. Hurley G, Prowell B. Evaluation of Sasobit® for use in warm mix asphalt. NCAT report 05-06, Auburn; 2005.
3. Hurley G, Prowell B. Evaluation of Evotherm® for use in warm mix asphalt. NCAT report 06-02, Auburn; 2006.
4. Evaluation of potential process for use in warm mix asphalt
5. Nazzal Munir, Abbas Ala R, Ali Ayman W, Roy Arjun. Investigation of foamed warm mix asphalt performance using the MEPDG. GeoCongress; 2012.10.1061/9780784412121.165 ↗
6. Stabilisation with foamed asphalt of aggregates cornrnonlv used in low volume roads
7. Kendall · 1999
8. Evaluation of warm-mix asphalt produced with the double barrel green process10.3141/2126-03 ↗
9. Effects of long-term aging on moisture sensitivity of foamed WMA mixtures containing moist aggregates10.1617/s11527-011-9763-4 ↗
10. Utilization of foaming technology in warm- mix-asphalt mixtures containing moist aggregates10.1061/(ASCE)MT.1943-5533.0000297 ↗
11. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP10.1016/j.conbuildmat.2012.02.095 ↗
12. The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders10.1080/10298430500373336 ↗
13. Button JW, Estakhri C, Wimsatt A. A synthesis of warm-mix asphalt. Report No. SWUTC/07/0-5597-1. Texas Transportation Institute, College Station, Texas; 2007.
14. Prowell BD, Hurley GC. Warm-Mix Asphalt: Best Practices. National Asphalt Pavement Association, Lanham, Md.; 2007.
15. Thompson G. Warm mix asphalt. 2012 NW Transportation Conference. (accessed 22.11.12).
16. Understanding internal structure characteristics of foamed asphalt mixes with fracture face image analyses10.3141/2057-03 ↗
17. Laboratory investigation of the use of foamed asphalt for recycled bituminous pavements
18. Kim Y, Lee H, Heitzman M. Validation of new mix design procedure for cold in-place recycling with foamed asphalt for Iowa Dept. of transportation. Transportation Research Board (TRB) Annual Meeting CD-ROM. Washington DC; 2006.
19. SHRP Superior performing asphalt pavements (Superpave): the Product of SHRP asphalt research program. strategic highway research ProgramA-410. National Research Council, Washington DC; 1994.
20. JTJ 052-2000.Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering [in Chinese].
21. Zero shear viscosity of asphalt binders10.3141/1810-07 ↗
22. Determination of zero shear viscosity of warm asphalt binders10.1016/j.conbuildmat.2008.08.015 ↗
23. Migliori F, Corte J-F. Comparative study of RTFOT and PAV ageing simulation laboratory tests. Proc. Eurobiturne Work shop99(Luxembourg). Paper 1999. No. 045.
24. Evaluation of compactability and mechanical properties of bituminous mixes with warm additives10.1016/j.conbuildmat.2010.11.024 ↗
25. Non-Newtonian viscosity of polymer-modified bitumens10.1007/BF02472233 ↗
26. The rheological properties of asphaltic bitumen
27. Desmazes C, Lecomte M, Lesueur D, Phillips M. A protocol for reliable measurement of zero-shear-viscosity in order to evaluate the anti-rutting performance of binders. Proceedings of The Papers Submitted for Review at 2nd Eurasphalt and Eurobitume Congress, Held 20–22 September 2000, Barcelona, Spain. Book 1 - Session 1; 2000.