Formulations of sulfobelite cement through design of experiments
Source abstract
Abstract
Abstract This paper reports on the use of design of experiments for the formulation of sulfobelite clinkers. Samples made of 30–70 wt.%C 2 S, 20–60 wt.%C 4 A 3 S and 10–25 wt.%C 4 AF were formulated. The red mud generated from the Bayer process was used in some formulations as source of iron and aluminum. X-ray diffraction was used to define the high and low limits of phase compositions. Estimations of CO 2 emissions were also conducted. Derived cements (5 wt.% gypsum) were cured, and the temperature of hydration, compressive strength and density were determined. The Rietveld refinement showed that the percentages of phases in the clinkers are close to the expected ones. The presence of C 4 A 3 S is crucial to improve the mechanical strength at early ages. The use of red mud leads to the formation of C 3 A and then the derived cements show faster hydration. In addition, C 2 S is the major responsible for the generation of CO 2 emissions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bauxite Residue and Utilization · Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Industrial trial production of low energy belite cement10.1016/S0958-9465(02)00097-5 ↗
2. High belite cements-present status and future technological options: part I10.1016/0008-8846(96)00099-3 ↗
3. Hewlett · 1998
4. Aluminum-rich belite sulfoaluminate cements: clinkering and early age hydration10.1016/j.cemconres.2009.11.003 ↗
5. Properties of blended sulfoaluminate belite cement10.1016/S0950-0618(00)00050-7 ↗
6. High-performance cement matrices based on calcium sulfoaluminate–belite compositions10.1016/S0008-8846(01)00649-4 ↗
7. The hydration phase and pore structure formation in the blends of sulfoaluminate–belite cement with Portland cement10.1016/S0008-8846(02)00994-8 ↗
8. Performance of belite–sulfoaluminate cements10.1016/S0008-8846(01)00543-9 ↗
9. Preparation of iron rich cements using red mud10.1016/S0008-8846(97)00101-4 ↗
10. Red mud addition in the raw meal for the production of Portland cement clinker10.1016/j.jhazmat.2004.08.002 ↗
11. Utilization of ferroalumina as raw material in the production of ordinary Portland cement10.1016/j.jhazmat.2009.02.049 ↗
12. Development of a pozzolanic pigment from red mud10.1016/S0008-8846(97)00162-2 ↗
13. Montgomery · 1996
14. Ghosh · 1990
15. Accuracy of XRPD QPA using the combined Rietveld-RIR method10.1107/S002188989901643X ↗
16. Larson AC. Von Dreele RB. General structure analysis system (GSAS). Los Alamos National Laboratory Report LAUR; 2000. p. 86–748.
17. Lea · 2001
18. Ramachandran · 2001
19. Taylor · 1990