The study of an energy efficient cool white roof coating based on styrene acrylate copolymer and cement for waterproofing purpose—Part II: Mechanical and water impermeability properties
Source abstract
Abstract
The mechanical properties and water impermeability of the developed cool white roof coating based on styrene acrylic copolymer and cement are systematically investigated in the current paper. The coating has good tensile properties, adhesion strength and compliance at low temperature. In particular, the coating possesses excellent water impermeability. The good flexibility and compliance at low temperature result from the low glass transition temperature of the high elastic styrene acrylate copolymer emulsion. Compared with the untreated specimens, after thermal, alkali, water immersion and ultraviolet treatments, the tensile strength of the coating is increased, while its breaking elongation is decreased. In addition, the coating has good artificial accelerated weather resistance in terms of mechanical properties. The excellent water impermeability of the coating stem from the cross-linked nature of the high elastic styrene acrylate copolymer emulsion, the formation of interpenetrating network structures and the Ca2+ bridging effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building Energy and Comfort Optimization · Urban Heat Island Mitigation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Waterproofing of Portland cement mortars with a specially designed polyacrylic latex10.1016/0008-8846(95)00039-F ↗
2. The study of low polymer/cement ratio high elastic polymer-modified cement-based waterproof coatings
3. Research on high-performance polymer/cement-based waterproof coatings10.1016/j.surfcoat.2014.03.040 ↗
4. Mechanism and application progress of polymer–cement waterproof coating
5. The study of polymer-modified cement-based waterproof coatings and the mechanism of film formation
6. The polymer modified cementitious waterproof coatings and its influencing factors
7. The factors affecting the performances of polymer-modified cement-based waterproof coatings
8. The effects of compositions on the performances of polymer-modified cement-based waterproof coatings
9. The correlations between the compositions and performances of polymer-modified cement-based waterproof coatings
10. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete10.1016/S0958-9465(01)00033-6 ↗
11. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion
12. Effect of polymer modified cementitious coatings on water and chloride permeability in concrete10.1016/j.conbuildmat.2013.08.050 ↗
13. Long-term chloride-induced corrosion monitoring of reinforced concrete coated with commercial polymer-modified mortar and polymeric coatings10.1016/j.conbuildmat.2013.07.099 ↗
14. Bertolini · 2004
15. X. Xue, J. Yang, L. Jiang, W. Zhang, J. Qu, L. Xu, H. Zhang, J. Song, R. Zhang, Y. Li, J. Qin, Z. Zhang, The study of polymer-modified cement-based energy efficient cool white waterproofing coatings—Part I: Optical properties, estimated cooling effect and optical performance after artificial accelerated weathering, Constr. Build. Mater. accepted for publication.
16. BS, EN 12614, Products and Systems for the Protection and Repair of Concrete Structures – Test methods – Determination of Glass Transition Temperatures of Polymers, 2004.
17. Cen, EN 1504-2, Products and Systems for the Protection and Repair of Concrete Structures – Definitions, Requirements, Quality Control and Evaluation of Conformity– Part 2: Surface Protection Systems for, Concrete, 2004.
18. Cen, EN 1062, Paints and Varnishes – Coating Materials and Coating Systems for Exterior Masonry and Concrete, 2002.
19. Preparation and properties of polymer–cement waterproof coatings
20. Microstructural aspects in a polymer-modified cement10.1016/S0008-8846(98)00153-7 ↗
21. Evaluation of a surface coating in retarding reinforcement corrosion10.1016/0950-0618(96)00013-X ↗