Characteristics of Australian brown coal fly ash blended geopolymers
Source abstract
Abstract
The present study evaluates the potential re-use options for a suite of low rank brown coal fly ashes (ASTM class C fly ash) as feedstock for geopolymer binder synthesis. Ash suitability was evaluated using a number of conventional characterisation tools including XRF, calorimetric and microscopy to analyse solid phase distribution in relation to compositional differences derived from ternary diagram analogues. Blends of brown coal ash with selected black coal fly ash (class F) and blast furnace slag were developed for compressive strength and durability tests. The study show that brown coal fly ash with higher Al content improved the rate of reaction of blended binders and that observed high contents of sulphate and magnesium oxides available in some brown coal fly ashes induced accelerated decomposition in high moist environments. Overall, it was evident from both microscopy and mineralogical analysis of binder mixtures that brown coal fly ash participate in geopolymer network formation rather than act as filler material. Factors influencing brown coal ash reactivity and the potential for incorporating this class of ash in developing stable and usable geopolymer binder systems are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Future options for brown coal based electricity generation – the role of IDGCC.
2. Cements incorporating brown coal fly ash from the Latrobe Valley region of Victoria, Australia10.1016/0008-8846(93)90001-P ↗
3. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
4. Binder chemistry – low-calcium alkali-activated materials
5. Binder chemistry – high-calcium alkali-activated materials
6. Xu · 2002
7. Dirgantara · 2013
8. Reduction of metal leaching in brown coal fly ash using geopolymers10.1016/j.jhazmat.2004.06.034 ↗
9. Properties of brown coal fly ash geopolymer mortars
10. High-strength geopolymer using fine high-calcium fly ash10.1061/(ASCE)MT.1943-5533.0000161 ↗
11. The chemical composition of mortars made from magnesia-phosphate cement10.1016/0008-8846(88)90075-0 ↗
12. Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD10.1016/j.fuel.2010.07.031 ↗
13. Microscopy and microanalysis of inorganic polymer cements. 1: remnant fly ash particles10.1007/s10853-008-3077-0 ↗
14. Medium-term phase stability of Na2O–Al2O3–SiO2–H2O geopolymer systems10.1016/j.cemconres.2007.10.003 ↗
15. The composition range of aluminosilicate geopolymers10.1016/j.jeurceramsoc.2004.06.001 ↗
16. Effect of sodium sulfate on the alkali activation of fly ash10.1016/j.cemconcomp.2010.05.002 ↗
17. Distribution of oxides in fly ash controls strength evolution of geopolymers10.1016/j.conbuildmat.2014.08.016 ↗
18. Size distribution of unburned carbon in coal fly ash and its implications10.1016/S0016-2361(03)00255-2 ↗
19. Factors affecting the shrinkage of fly ash geopolymers10.1007/s12613-011-0407-z ↗
20. Chithiraputhiran · 2012
21. Dissolution of aluminosilicate minerals and by-products in alkaline media10.1007/s10853-006-0531-8 ↗
22. A calorimetric study of early hydration of alkali-slag cements10.1016/0008-8846(95)00126-W ↗
23. Synthesis and heavy metal immobilization behaviours of slag based geopolymer10.1016/j.jhazmat.2006.09.033 ↗
24. Microstructure and durability of alkali-activated materials as key parameters for standardization
25. Compatibility studies between N–A–S–H and C–A–S–H gels, Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
26. Experimental study of Si–Al substitution in calcium–silicate–hydrate (C–S–H) prepared under equilibrium conditions10.1016/j.cemconres.2009.05.001 ↗
27. Hydration of cementitious materials, present and future10.1016/j.cemconres.2011.03.026 ↗
28. Using inorganic polymer to reduce leach rates of metals from brown coal fly ash10.1016/j.mineng.2003.10.024 ↗
29. Performance of concrete incorporating Latrobe valley brown coal ash
30. The role played by the reactive alumina content in the alkaline activation of fly ashes10.1016/j.micromeso.2005.11.015 ↗
31. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
32. Influence of slag as additive on compressive strength of fly ash-based geopolymer10.1061/(ASCE)0899-1561(2007)19:6(470) ↗
33. Factors affecting the suitability of fly ash as source material for geopolymers10.1016/j.fuel.2009.09.012 ↗
34. Distinctive microstructural features of aged sodium silicate-activated slag concretes10.1016/j.cemconres.2014.07.008 ↗
35. MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders10.1016/j.cemconres.2013.12.003 ↗