journal article·2016-02

Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints

Shuang Liu, Liantong Mo, Kai Wang, Yanjun Xie, M.F. Woldekidan

Publisher page

Abstract

Abstract The service performance of asphaltic plug joints (APJs) is unsatisfactory. Premature cracking, rutting and debonding of APJ filling mixture is strongly related to the relevant properties of the used asphalt sealants. Better understanding on the sealant properties and their relation to the mixture performance is thus needed. In this paper, asphalt sealants were highly modified with a large amount of styrene–butadiene–styrene block copolymers (SBS), crumb rubber (CR), polypropylene (PP) and a combination of the above modifiers. Fluorescence microscopy analysis confirmed the formation of continuous polymer-rich phase, the swelling of crumb particle and the compatibility between the modifier and bitumen. Fundamental research into rheological behaviours was carried out by using viscosity test, dynamic modulus test, creep test and relaxation test. The significant plateau region of rheological master curves and black diagrams demonstrated an extraordinary effect of modification. Asphalt sealant’s properties were found to well relate to APJ mixture performance. Finite element (FE) modelling at meso scale provided a favourable result and allowed bridging the gap between sealant properties and mixture performance. The provided test results could be used as a database for the selection and optimization of asphalt sealant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Inspection survey of 150 expansion joints in road bridges10.1016/j.engstruct.2009.01.011 ↗
2. Asphalt plug joints: refined material tests and design guidelines10.3141/1740-16 ↗
3. Experience with testing and performance evaluation of bituminous plug expansion joints on concrete road bridges10.5568/ijra.2011-01-01.117 ↗
4. M. Huurman, J. Moraal, LINTRACK research into long-term joint behaviour: summarising and report. Report No. 7–10-202-7, Section of Road and Railway Engineering, Delft University of Technology, January 2010.
5. S. Hean, M.N. Partl, Performance of two new asphaltic plug joint systems for large movements, TRB 2005 Annual Meeting CD-ROM.
6. Review on asphalt plug joints: performance, materials, testing and installation10.1016/j.conbuildmat.2013.03.089 ↗
7. Behavior of bridge asphalt plug joints under thermal and traffic loads10.1061/(ASCE)BE.1943-5592.0000056 ↗
8. Performance of polymer modified asphalt bridge expansion joints in low-temperature regions10.1061/(ASCE)0887-3828(2009)23:4(227) ↗
9. ASTM, Standard specification for asphaltic plug joints for bridges, D6297, West Conshohocken, PA, 2001.
10. UK Bridge Joint Association, Standard for asphaltic plug joints, Document Ref: BJA/S2/APJ, May 2003.
11. ASTRA guideline, Fahrbahnübergänge aus Polymerbitumen, Eidgenössisches Departement für Umwelt, Verkehr und Kommunikation, Bundesamt frü Strassen, ASTRA, Art. Nr. 806.315d, Switzerland, 2005.
12. Investigation into material development and optimization of improved ravelling resistant porous asphalt concrete10.1016/j.matdes.2010.02.026 ↗
13. A modified HS model: Numerical applications in modeling the response of bituminous materials10.1016/j.finel.2012.01.003 ↗
14. A micromechanical approach to investigate asphalt concrete rutting mechanisms10.1016/j.conbuildmat.2011.11.041 ↗
15. Styrene butadiene styrene polymer modification of road bitumens10.1023/B:JMSC.0000012927.00747.83 ↗
16. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen10.1016/j.conbuildmat.2007.07.013 ↗
17. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber10.1016/j.conbuildmat.2011.06.061 ↗
18. Investigation of asphalt binder containing various crumb rubbers and asphalts10.1016/j.conbuildmat.2012.11.063 ↗
19. Asphalt modification with different polyethylene-based polymers10.1016/j.eurpolymj.2005.05.034 ↗
20. Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling10.1016/j.conbuildmat.2013.03.064 ↗
21. American Society of Testing Materials (ASTM), D4402-06 standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer, vol. 04.04, ASTM, Pennsylvania, USA, 2006.
22. Self-healing of open cracks in asphalt mastic10.1016/j.fuel.2011.09.009 ↗
23. S. Hean, M.N. Partl, Long-term behaviour of polymer bitumen joint sealants on a trial road section, 3rd Eurasphalt & Eurobitume Congress Vienna, 2004.
24. Evaluation of the potential of Sasobit to reduce required heat energy and CO2 emission in the asphalt industry10.1016/j.jclepro.2010.08.002 ↗
25. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives10.1016/j.conbuildmat.2012.07.074 ↗
26. Investigation of the rheological properties and storage stability of CR/SBS modified asphalt10.1016/j.conbuildmat.2014.10.022 ↗
27. Cracking of asphalt at low temperature as related to bitumen rheology10.1023/A:1004383506240 ↗
28. Influence of polymer modification on low temperature behaviour of bituminous binders and mixtures10.1007/BF02479497 ↗
29. Dynamic master curves of polymer modified asphalt from three different geometries10.1515/arh-2003-0007 ↗
30. The effect of long-term oxidation on the rheological properties of polymer modified asphalts10.1016/S0016-2361(03)00144-3 ↗
31. Rheological characterization of styrene–butadiene–styrene copolymer modified bitumens10.1016/S0950-0618(96)00033-5 ↗
32. Rheological properties of styrene butadiene styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
33. Effect of composition on the properties of SEBS modified asphalts10.1016/j.eurpolymj.2005.11.024 ↗
34. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures10.1016/j.fuel.2011.09.017 ↗
35. Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures10.1016/j.conbuildmat.2014.04.082 ↗
36. M.F. Woldekidan, Response modelling of bitumen, bituminous mastic and mortar. Ph.D thesis, Road and Railway Engineering, Delft University of Technology, 2011.
37. Analysis and application of relationships between low-temperature rheological performance parameters of asphalt binders10.1016/j.conbuildmat.2009.10.015 ↗
38. Implementing viscoelastic rheological methods to evaluate low temperature performance of modified asphalt binders10.1016/j.conbuildmat.2012.04.076 ↗