journal article·2016-06

The effect of carbonate and sulfate ions on chloride threshold level of reinforcement corrosion in mortar with/without fly ash

Rong Liu, Linhua Jiang, Guohong Huang, Yeran Zhu, Xingrong Liu, Hongqiang Chu, Chuangsheng Xiong

Publisher page

Abstract

Abstract The aim of the study is to evaluate the effect of carbonate and sulfate ions on chloride threshold level of reinforcement corrosion in mortar with/without fly ash. The initiation of active corrosion for the reinforcement was detected by half-cell potential and electrochemical impedance spectra methods. The free chloride or total chloride by mass of binder was used to express the chloride threshold level. The results indicate that the presence of carbonate ions in the chloride solution shortened the time to initiation of reinforcement corrosion and decreased chloride threshold level in both the Portland cement mortar and fly ash mortar specimens. And compared with the single chloride solution, the concomitant presence of chloride ions and sulfate ions decreased the chloride threshold level, but did not influence the time to initiation of chloride-induced reinforcement corrosion. Besides, although the presence of fly ash decreased the chloride threshold level, it delayed the time to initiation of reinforcement corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Influence of detection methods on chloride threshold value for the corrosion of steel reinforcement10.1016/j.conbuildmat.2008.09.011 ↗
2. Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions10.1016/j.conbuildmat.2011.12.044 ↗
3. Influence of chloride salt type on critical chloride content of reinforcement corrosion in concrete10.1680/macr.12.00082 ↗
4. Effect of cation type on corrosion behavior of steel reinforcement in fly ash concrete
5. Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete10.1016/j.conbuildmat.2010.07.023 ↗
6. Chloride thresholds in marine concrete10.1016/0008-8846(96)00035-X ↗
7. Chloride threshold dependence of pitting potential of reinforcements10.1016/S0013-4686(02)00283-9 ↗
8. Experimental investigation of the threshold chloride concentration for corrosion initiation in reinforced concrete structures10.1680/macr.2003.55.2.117 ↗
9. Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion
10. The influence of chlorides and sulfates on concrete durability
11. Damage of concrete in sulfate and chloride solution
12. Corrosion of reinforcement in artificial sea water and concentrated sulphate solution10.1016/0008-8846(90)90077-B ↗
13. Influence of carbonation on chloride-induced reinforcement corrosion in simulated concrete pore solutions10.1016/j.conbuildmat.2014.01.030 ↗
14. ASTM C876–91: Standard test method for half-cell potentials of uncoated reinforcing steel in concrete, 1991.
15. Influence of N,N’-dimethylaminoethanol as an inhibitor on the chloride threshold level for corrosion of steel reinforcement
16. Effect of fly ash on concrete reinforcement corrosion studied by EIS10.1016/S0958-9465(00)00003-2 ↗
17. Equivalent circuit for modelling the steel-concrete interface. I. Experimental evidence and theoretical predictions10.1016/S0010-938X(98)00036-5 ↗
18. Chloride-induced corrosion on reinforcing steel from the fundamentals to the monitoring techniques10.1016/S0958-9465(02)00089-6 ↗
19. Reinforcement corrosion in concrete structures, its monitoring and service life prediction – a review10.1016/S0958-9465(02)00086-0 ↗
20. Corrosion monitoring of reinforced concrete structures –a review10.1016/S1452-3981(23)17049-0 ↗
21. Effects of carbonation on pore structure and diffusional properties of hydrated cement pastes10.1016/S0008-8846(97)00102-6 ↗
22. Cussler · 2002
23. The effect of chloride and sulfate ions on reinforcement corrosion10.1016/0008-8846(93)90144-X ↗
24. Long-term effect of sulfate ions and associated cation type on chloride-induced reinforcement corrosion in Portland cement concretes10.1016/S0958-9465(01)00023-3 ↗
25. Bakker · 1983
26. Rio · II Cemento · 1983 · 80 · 37
27. Effect on reinforced concrete in sodium chloride and sodium sulfate environments
28. Pore structure, permeability and diffusivity of hardened cement paste and concrete in relation to durability: status and prospects
29. Khan · 1993
30. Study of chloride binding and diffusion in GGBS concrete10.1016/S0008-8846(02)00712-3 ↗
31. Chloride binding capacity of various hydrated cement paste systems10.1016/S1065-7355(97)90003-1 ↗