Electric arc furnace slags in cement-treated materials for road construction: Mechanical and durability properties
Source abstract
Abstract
Abstract Electric arc furnace (EAF) slags are by-products of a widespread steelmaking process. The recycling of these materials as artificial aggregates in different road applications is a well established practice, which has allowed to reduce the consumption of natural resources and to minimize waste production and costs of landfilling. However, these aggregates are still underutilized in cement-treated materials (CTMs), which consist of mixtures of aggregates blended with small amounts of cement and water that harden after compaction to form a strong paving material. In the light of these considerations, different cement-treated materials, each containing different percentages of natural and artificial aggregates were analyzed. After a preliminary characterization of chemical, physical and durability properties of EAF slag aggregates, a mix design procedure based on both moisture-density approach (gyratory compactor) and mechanical testing (unconfined compression test and indirect tensile test) was performed to identify the optimum cement and water content of CTMs. The design mixtures were then subjected to 5 different accelerated aging procedures in order to study the influence of some factors (temperature, pressure and humidity) on the durability of the cement-treated materials. The results highlighted how the EAF slags represent suitable aggregates for cement-treated materials. The use of these aggregates produced a greater compaction difficulty, but guaranteed excellent mechanical performances, above all in terms of indirect tensile strength. The durability analysis demonstrated that the recycled mixtures showed a worse behavior than the reference one, composed only by limestone aggregates. However, if correctly designed, balancing the percentage of natural aggregate replacement, these mixtures could represent suitable and durable solution for base and sub-base pavement layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Federacciai · 2015
2. Products of steel slags an opportunity to save natural resources10.1016/S0956-053X(00)00102-1 ↗
3. Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials – an overview10.1016/j.resconrec.2013.03.003 ↗
4. de Brito · 2013
5. Brand · 2014
6. Yildirim · 2009
7. Determination of the expansion force of coarse steel slag aggregate10.1016/j.conbuildmat.2010.04.004 ↗
8. Chemical assessment of the electric arc furnace slag as construction material: expansive compounds10.1016/j.cemconres.2004.01.029 ↗
9. Steel slag - its production, processing and cementitious properties10.1061/(ASCE)0899-1561(2004)16:3(230) ↗
10. The volume stability of modern steelmaking slags10.1179/037195503225003708 ↗
11. Leaching behavior of aged steel slags10.1002/srin.201300119 ↗
12. Laboratory treatments of EAF slag for its use in construction10.4028/www.scientific.net/AMR.726-731.2921 ↗
13. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures10.1016/j.conbuildmat.2012.02.036 ↗
14. Characterization of thermal properties and combustion behaviour of asphalt mixtures in the cone calorimeter10.1016/j.firesaf.2015.04.003 ↗
15. Fatigue characterization of asphalt mixes containing electric arc furnace (EAF) steel slag subjected to long term aging10.1016/j.conbuildmat.2014.08.052 ↗
16. Laboratory evaluation of warm mix asphalt mixtures containing electric arc furnace (EAF) steel slag10.1016/j.conbuildmat.2013.08.034 ↗
17. Utilization of steel slag aggregate for road bases10.1520/JTE12683 ↗
18. Swelling behavior of electric arc furnace aggregates for unbound granular mixtures in road construction
19. Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture10.1016/j.conbuildmat.2007.11.001 ↗
20. Experimental analysis of hydraulically bound mixtures made with waste foundry sand and steel slag10.1617/s11527-014-0333-4 ↗
21. Experimental investigation on fibre-reinforced cement-treated materials using reclaimed asphalt10.1016/j.conbuildmat.2012.08.040 ↗
22. Laboratory investigation on the strength characteristics of cement-treated base10.4028/www.scientific.net/AMM.507.353 ↗
23. Estimation of the compressive strength and modulus of elasticity of cement-treated aggregate base materials10.3141/1837-04 ↗
24. Varner · 2011
25. Mechanical properties of cement-treated aggregate material – a review10.1016/j.matdes.2011.04.055 ↗
26. Guthrie · 2001
27. Kraemer · 2004 · vol. 2
28. Cftr · 2007
29. Effect of styrene-butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive10.1016/j.conbuildmat.2014.06.061 ↗
30. Stainless steel slags in hydraulic bound mixtures for road construction two case studies in Belgium
31. NCHRP · 2013
32. Concretes made of EAF slag and AOD slag aggregates from stainless steel process: mechanical properties and durability10.1016/j.conbuildmat.2014.12.007 ↗
33. Steel furnace slag aggregate expansion and hardened concrete properties10.1016/j.cemconcomp.2015.04.006 ↗
34. Durability of concrete made with EAF slag as aggregate10.1016/j.cemconcomp.2006.02.008 ↗
35. Mechanical and durability characteristics of concrete containing EAF slag as aggregate10.1016/j.cemconcomp.2009.05.006 ↗
36. Strength and durability of concrete made with electric steelmaking slag
37. SHRP · 1994
38. NCHRP · 2007