Improved Mode I fracture resistance of CFRP composites by reinforcing epoxy matrix with recycled short milled carbon fibre
Source abstract
Abstract
Abstract This paper proves that incorporation of recycled short milled carbon fibre (SMCF) in epoxy resin can lead to the generation of significantly tougher carbon fibre reinforced polymer (CFRP) systems in a cost effective manner for infrastructural applications. Structural epoxy resin is modified by adding 5 and 10 wt.% of SMCF particles and the ‘fracture toughness’ of the modified matrix ( G IC M ) is observed to be increased by 300% and 700% respectively. Subsequently, the SMCF modified epoxy resins were used to fabricate unidirectional carbon fibre reinforced laminates and tested under Mode I crack opening. The SMCF reinforcement showed 50% and 64% improvement in the laminates fracture toughness ( G IC C ) after adding 5% and 10% SMCF by wt., respectively. Scanning electron microscope images of the fracture surface highlight improved debonding and pull-out mechanisms contributing to the additional fracture toughness, and at the same time there was no evidence of fibre clustering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. FRPs for structural rehabilitation: a survey of recent progress10.1002/1528-2716(200004/06)2:2<133::AID-PSE16>3.0.CO;2-C ↗
2. Analysis of reinforced concrete beams strengthened with FRP laminates10.1061/(ASCE)0733-9445(2000)126:6(684) ↗
3. The transfer of matrix toughness to composite mode i interlaminar fracture toughness in glass-fibre/vinyl ester composites10.1023/A:1019658627639 ↗
4. Interlaminar and intralaminar reinforcement of composite laminates with aligned carbon nanotubes10.1016/j.compscitech.2009.09.001 ↗
5. An in situ carbon-grafted alkaline iron electrode for iron-based accumulators10.1039/c3ee42783h ↗
6. Mode I interlaminar fracture toughness of composites using slender double cantilevered beam specimens10.1177/002199838501900204 ↗
7. A double cantilever beam test for characterizing Mode I delamination of composite materials10.1177/073168448200100402 ↗
8. Hygrothermal influence on delamination behavior of graphite/epoxy laminates10.1016/0013-7944(85)90142-0 ↗
9. Epoxy nanocomposites – fracture and toughening mechanisms10.1016/j.engfracmech.2006.05.018 ↗
10. The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles10.1016/j.polymer.2010.10.048 ↗
11. Improved crack resistance and fracture toughness using MWCNT modified epoxy for delaminated composite structures10.1016/j.mspro.2014.06.132 ↗
12. Enhancement of mechanical properties of composites through incorporation of CNT in VARTM – a review10.1177/0731684409359103 ↗
13. Enhanced fracture properties of carbon reinforced composites by the addition of multi-wall carbon nanotubes10.1177/0021998308097735 ↗
14. Enhancement of fracture toughness of carbon fiber laminated composites using multi wall carbon nanotubes10.1016/j.carbon.2014.07.084 ↗
15. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – a comparative study10.1016/j.compscitech.2005.04.021 ↗
16. A review and analysis of electrical percolation in carbon nanotube polymer composites10.1016/j.compscitech.2008.06.018 ↗
17. Rheological behavior of multiwalled carbon nanotube/polycarbonate composites10.1016/S0032-3861(02)00151-9 ↗
18. Functionalized single-walled carbon nanotubes for carbon fiber-epoxy composites10.1021/jp071329a ↗
19. Carbon nanotube integrated multifunctional multiscale composites10.1088/0957-4484/18/27/275708 ↗
20. Multifunctional composites using reinforced laminae with carbon-nanotube forests10.1038/nmat1650 ↗
21. Limiting mechanisms of mode i interlaminar toughening of composites reinforced with aligned carbon nanotubes10.1177/0021998309102398 ↗
22. Physico-chemical characterization of novel epoxy matrix system reinforced with recycled short milled carbon
23. Improved fracture toughened epoxy matrix system reinforced with recycled milled carbon fibre
24. ASTM D5045–99. Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials, West Conshohocken, PA: ASTM international; 1999. p. 9.
25. Experimental methods of determining fracture toughness of fiber reinforced polymer composites under various loading conditions
26. ASTM D5528–13. Standard test method for Mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites, West Conshoshocken: ASTM International 2013.
27. Broek · 1986
28. Cure-dependent viscoelastic Poisson’s ratio of epoxy10.1007/s11340-006-9013-9 ↗
29. Time, temperature, and strain effects on viscoelastic Poisson’s ratio of epoxy resins10.1002/pen.21060 ↗
30. Fracture properties and fracture surface morphologies in rubber-PMMA composites10.1007/s11665-007-9065-8 ↗
31. ASTM D 790–02. Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materilas, West Conshohocken, PA: ASTM International; 2002. p. 9.
32. Improved fracture toughness in carbon fibre epoxy composite through novel pre-preg coating method using Epoxy Terminated Butadiene Nitrile rubber10.1016/j.matdes.2014.05.018 ↗
33. Microscopic aspects of failure and fracture in cross-ply fibre reinforced composite laminates10.1177/002199838902301202 ↗
34. Interlaminar fracture toughness of epoxy glass fiber fly ash laminate composite
35. Compston · J. Mater. Sci. Lett. · 2000 · 19 · 1710.1023/A:1006783227431 ↗
36. Compston · Appl. Compos. Mater. · 2002 · 9 · 29110.1023/A:1019658627639 ↗
37. Fracture toughness of CFRP with modified epoxy resin matrices10.1016/0266-3538(92)90099-O ↗
38. Carbon nanotube-based hierarchical composites: a review10.1039/c000041h ↗