Withdrawal stiffness of threaded rods embedded in timber elements
Source abstract
Abstract
Abstract In the present paper, the withdrawal stiffness of axially loaded threaded rods screwed into timber elements is investigated using theoretical, numerical and experimental methods. The theoretical approach is based on the application of classical Volkersen theory on axially loaded connectors. An experimental investigation of withdrawal of threaded rods from glulam elements is presented. The parameters of this investigation are the embedment length and the angle between the rod axis and the grain direction. The theoretical and numerical estimations are compared to the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Wood Treatment and Properties · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Self-tapping screws as reinforcements in beam supports
2. Reinforcements perpendicular to grain using self-tapping screws
3. Self-tapping screws as reinforcement perpendicular to the grain in timber connections
4. Moment resistance of bolted timber connections with perpendicular to grain reinforcements
5. Joints with inclined screws
6. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
7. Performance of moment resisting self-tapping screw assembly under reverse cyclic load
8. Cantilever glulam beam fastened with long threaded steel rods
9. On connections for timber bridges
10. Development of ductile semi-rigid joints with lagscrewbolts and glued-in rods
11. Requirements for moment connections in statically indeterminate timber structures10.1016/j.engstruct.2011.03.014 ↗
12. Notes on deformation and ductility requirements in timber structures
13. Vibrations of timber floor beams with end restraints
14. Wollebæk · 2005
15. Withdrawal capacity of long self-tapping screws paralell to grain direction
16. The effect of thread geometry on screw withdrawal strength
17. Gehloff · 2011
18. Withdrawal capacity of screws in european ash (Fraxinus excelsior L.)
19. A simple unified model for withdrawal of lag screws and glued-in rods10.1007/s00107-010-0478-y ↗
20. A simplified model for withdrawal of screws from end-grain of timber10.1016/j.conbuildmat.2011.10.066 ↗
21. Design equation for withdrawal resistance of threaded fasteners in the canadian timber design code
22. Pull-out strength properties of lagscrewbolt connection in cross laminated timber
23. Development and verification of theory on pull-out properties of lagscrewbolted timber joints
24. Base parameters of self-tapping screws
25. Influencing parameters on the experimental determination of the withdrawal capacity of self-tapping screws
26. Investigations concerning the force distribution along axially loaded self-tapping screws
27. Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products
28. Influence of the Number of Fastener on Tensile Strength of Lagscrewbolted Glulam Joint
29. CEN, European committee for standardization · 2004
30. Die nietkraftverteilung in zugbeanspruchten nietverbindungen mit konstanten laschenquerschnitten
31. Axially loaded glued-in hardwood dowels10.1007/s002260000076 ↗
32. CEN, European committee for standardization · 1991
33. CEN, European committee for standardization · 2013
34. SFS intec · 2010
35. DIN, Deutsches Institut für Normung · 1975
36. Abaqus analysis user’s guide, Version 6.13. Dassault Systèmes Simulia corp.; 2013.
37. Dahl · 2009