Optimizing design of high strength cement matrix with supplementary cementitious materials
Source abstract
Abstract
Abstract In present paper, high strength cementitious matrix, special for high strength engineered cementitious composite (ECC) is designed using two kinds of cement, ordinary Portland cement (OPC) and calcium sulfoaluminate cement (SAC), two sand types (fine and coarse sand) and three supplementary cementitious materials (SCMs), silica fume (SF), slag (SG) and fly ash (FA). Optimized binder proportion with the addition of SF, SG and FA of high strength matrix are obtained through three series compressive and bending tests. The tensile performance of ECC utilizing above high strength matrix is investigated through uniaxial tensile tests. The test results show that through optimizing on the binder composition with SCMs, compressive and bending strength of the low water to binder ratio cement matrix is significantly increased. With a similar fluidity of the fresh mortar and under general curing condition, the compressive strength at 3, 7 and 28 days changes from 25.5, 43.0 and 59.8 MPa to 35.4, 61.9 and 85.6 MPa for SAC mortar with fine sand before and after binder optimization. For OPC fine sand mortar, the compressive strength at 3, 7 and 28 days changes from 45.0, 57.8 and 77.9 MPa to 62.0, 80.6 and 108.0 MPa. Similar trend is observed on the bending strength of those mortars as well. Based on the present study, the optimized binder composition with SF, SG and FA additions in weight are cement:SF:SG:FA = 0.7:0.1:0.1:0.1. Using present optimized binder as cementing matrix, the primary tensile results on polyvinyl alcohol (PVA)-steel hybrid fiber reinforced composites show the tensile strength and strain can achieve 7.3 MPa, 0.6% and 8.1 MPa, 0.5% respectively for SAC and OPC cementing system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Li · 1993 · 373
2. From micromechanics to structural engineering–the design of cementitious composites for civil engineering applications
3. Matrix design for pseudo strain-hardening fiber reinforced cementitious composites10.1007/BF02473191 ↗
4. The transition from macro-multiple cracking to micro-multiple cracking in cementitious composites10.1016/S1007-0214(08)70109-3 ↗
5. Introducing ductile strip for durability enhancement of concrete slabs10.1061/(ASCE)0899-1561(2002)14:3(253) ↗
6. Engineered cementitious composite with characteristic of low drying shrinkage10.1016/j.cemconres.2008.11.012 ↗
7. Basic performance of the composite deck system composed of orthotropic steel deck and ultra thin RPC layer10.1061/(ASCE)BE.1943-5592.0000348 ↗
8. Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics model10.1016/j.engfracmech.2014.08.016 ↗
9. Tensile performance of polyvinyl alcohol-steel hybrid fiber reinforced cementitious composite with impact of water to binder ratio
10. Shrinkage of high strength calcium sulfoaluminate cement concrete with impact of pre-soaked lightweight aggregate internal curing10.1680/macr.14.00201 ↗
11. Neville · 1981
12. Permeability study of cracked concrete10.1016/S0008-8846(97)00031-8 ↗
13. Behavior of hybrid-fiber engineered cementitious composites subjected to dynamic tensile loading and projectile impact10.1061/(ASCE)0899-1561(2005)17:2(143) ↗
14. Performance of hybrid-fiber ECC blast/shelter panels subjected to drop weight impact10.1061/(ASCE)0899-1561(2007)19:10(855) ↗
15. Micromechanics of crack bridging in fibre-reinforced concrete10.1007/BF02472808 ↗