Shear capacity assessment of reinforced concrete beams with corroded stirrups
Source abstract
Abstract
Abstract This paper presents proposed design procedures for quantifying the residual shear strength of reinforced concrete (RC) beams with corrosion-damaged stirrups. Most of the building codes worldwide prescribe different approaches for shear design of RC beams in their provisions based on the type of beams: slender or deep. Conventional sectional method is widely recommended for slender beams while strut and tie model which is based on member analysis is recommended for deep beams. To account for the corrosion effects on shear, modifications to the current design methods were proposed. For sectional design method of slender beams, the reduction in cross-sectional area of steel stirrups due to corrosion was considered along with the reduction in geometry of concrete cross section due to spalling. For strut and tie modeling for deep beams, the reduction in effective concrete compressive strength because of corrosion cracks was considered along with the reduction in geometry of concrete cross section. One important feature of the proposed procedures is that the corrosion effects can be determined based on the width of corrosion cracks which can be easily determined in real situations. The proposed design procedures were validated using the experimental test data available in the literature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Effect of rebar corrosion on the structural performance of single reinforced beams
2. Effect of degree of corrosion on the properties of reinforcing steel bars10.1016/S0950-0618(01)00009-5 ↗
3. Residual capacity of corroded reinforcing bars10.1680/macr.2005.57.3.135 ↗
4. Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members
5. Corrosion effects on bond strength in reinforced concrete
6. Corrosion influence on bond between steel and concrete
7. Bond behavior of corroded reinforcement bars
8. Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion10.1016/S0008-8846(02)00783-4 ↗
9. Deterioration of concrete due to reinforcement steel corrosion10.1016/0958-9465(95)00043-7 ↗
10. Effect of reinforcement corrosion on flexural behavior of concrete slabs10.1061/(ASCE)0899-1561(1996)8:3(123) ↗
11. Flexural strength of concrete beams with corroding reinforcement
12. Interaction between loading, corrosion, and serviceability of reinforced concrete
13. Reinforcement corrosion and the deflection of RC beams–an experimental critique of current test methods10.1016/S0958-9465(02)00076-8 ↗
14. Impact of reinforcement corrosion on ductile behavior of reinforced concrete beams
15. Residual strength of corrosion-damaged reinforced concrete beams
16. Flexural behavior of concrete slabs with corroded bars10.1016/j.cemconcomp.2007.08.005 ↗
17. Bending performance of reinforced concrete member deteriorated by corrosion10.1080/15732471003588510 ↗
18. Effect of reinforcing steel area loss on flexural behavior of RC beams
19. Corrosion cracking and bond strength modeling for corroded bars in reinforced concrete
20. Analysis of mechanical behavior of corroded reinforced concrete structures
21. Load carrying capacity of concrete structures with corroded reinforcement10.1016/S0950-0618(97)00043-3 ↗
22. Tests of reinforced concrete beams with corrosion damaged stirrups
23. Shear strength of disturbed regions with corroded stirrups in reinforced concrete beams10.1139/L10-031 ↗
24. Shear performance of reinforced concrete beams with corroded stirrups in chloride environment10.1016/j.corsci.2011.01.058 ↗
25. Alaskar · 2013 · 106
26. Influence of stirrup corrosion on shear strength of reinforced concrete slender beams10.14359/51689147 ↗
27. Experimental and analytical study of corroded shear-critical reinforced concrete beams10.1617/s11527-013-0129-y ↗
28. Effects stirrup and inclined bar corrosion on shear behavior of RC beams10.1016/j.conbuildmat.2015.07.077 ↗
29. MacGregor · 1997 · 799
30. Deterioration of strength of RC beams due to corrosion and its influence on beams reliability10.1061/(ASCE)0733-9445(2007)133:9(1297) ↗
31. Design of shear strengths of corroded reinforced concrete beams10.1504/IJMIC.2009.027074 ↗
32. Analysis of reinforced concrete beams with corrosion damaged stirrups for shear capacity
33. ACI Committee 318 · 2014 · 519
34. Analyzing crack width to predict corrosion in reinforced concrete10.1016/S0008-8846(03)00246-1 ↗
35. Higgins · 2003 · 78
36. The modified compression field theory for reinforced concrete elements subjected to shear
37. Computer-based tools for design by strut-and-tie method: advances and challenges
38. Structural assessment of corroded reinforced concrete beams: modeling guidelines10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗
39. Capé · 1999 · 133