Lightweight expanded aggregates from the mixture of waste automotive plastics and clay
Source abstract
Abstract
Abstract Significant amount of waste associated with end of life vehicles enter waste stream each year and are usually disposed of in landfill, creating an environmental burden. Recycling automotive waste is very tedious and difficult due to its heterogeneous composition and nature. It is critically required to develop a solution to recycle and reuse these potential resources. In this paper, a novel recycling approach is established to produce lightweight aggregate by incorporating automotive shredded residual (ASR) plastics into clay at 1200 °C. The physical properties of lightweight aggregate such as bulk density, porosity and water absorption have been investigated. ASR plastics as pore-forming or gas releasing agent increased the porosity of the clay mixture. Incorporation of 2 wt% of ASR plastics into clay composite lead to a benefit of approximately 30% bulk density decrease and 40% porosity increase compared to the reference clay material used in this study. The obtained superior lightweight and porous aggregate products by using ASR plastics can be used in thermal insulation materials and also as substrates in soilless cultivation. This innovative approach could also help reduce the volume of autoplastics in landfills and could be a potential replacement of conventional additives in manufacturing composite materials for building applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and Waste Management Techniques · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Fly ash lightweight aggregates in high performance concrete10.1016/j.conbuildmat.2007.09.001 ↗
2. The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces10.1016/j.applthermaleng.2015.02.036 ↗
3. Lightweight aggregates from mixtures of granite wastes with clay10.1016/j.jclepro.2016.01.017 ↗
4. Constructed wetlands with light expanded clay aggregates for agricultural wastewater treatment10.1016/j.scitotenv.2013.06.052 ↗
5. Cilioprotists as biological indicators for estimating the efficiency of using Gravel Bed Hydroponics System in domestic wastewater treatment10.1016/j.sjbs.2013.11.003 ↗
6. The performance of lightweight aggregate concrete structures in service
7. Zeolitic tuffs as raw materials for lightweight aggregates10.1016/j.clay.2003.08.005 ↗
8. Manufacture and performance of lightweight aggregate from municipal solid waste incinerator fly ash and reservoir sediment for self-consolidating lightweight concrete10.1016/j.cemconcomp.2012.07.004 ↗
9. Reuse of incineration fly ashes and reaction ashes for manufacturing lightweight aggregate10.1016/j.conbuildmat.2009.08.008 ↗
10. Development of lightweight aggregate from sewage sludge and waste glass powder for concrete10.1016/j.conbuildmat.2013.05.039 ↗
11. Valorization of washing aggregate sludge and sewage sludge for lightweight aggregates production10.1016/j.conbuildmat.2016.04.095 ↗
12. Preparation and properties of porous ceramic aggregates using electrical insulators waste10.1016/j.ceramint.2015.01.009 ↗
13. Effect of hemp shive sizes on mechanical properties of lightweight fibrous composites10.1016/j.proeng.2012.07.441 ↗
14. Relation of chemical properties to the bloating of clays10.1111/j.1151-2916.1951.tb11619.x ↗
15. Zeolitic tuffs as raw materials for lightweight aggregates10.1016/j.clay.2003.08.005 ↗
16. Angus · 2016
17. Plastics recycling: challenges and opportunities10.1098/rstb.2008.0311 ↗
18. M. Carr. The future of plastics in Automotive. Omega plastics. http://www.omega-plastics.co.uk/news/industry-news/the-future-of-plastics-in-automotive/, 2016.
19. Steel vs. plastics: the competition for light-vehicle fuel tanks10.1007/BF03222990 ↗
20. Automotive industry challenges in meeting EU 2015 environmental standard10.1016/j.techsoc.2011.12.006 ↗
21. Automotive shredder residue (ASR) characterization for a valuable management10.1016/j.wasman.2010.05.017 ↗
22. Synthesis of ferrosilicon alloy using waste glass and plastic10.1016/j.matlet.2013.10.105 ↗
23. Transforming waste plastic into reductants for synthesis of ferrosilicon alloy10.1021/ie5041513 ↗
24. Synthesis of silicon carbide nanoparticles by using electronic waste as a carbon source10.1016/j.matlet.2014.01.018 ↗
25. Novel carbon micro fibers and foams from waste printed circuit boards10.1016/j.fuproc.2015.03.004 ↗
26. Activated carbon derived from non-metallic printed circuit board waste for supercapacitor application10.1016/j.electacta.2016.06.077 ↗
27. Concentration of precious metals during their recovery from electronic waste10.1016/j.wasman.2015.12.004 ↗