Axial compressive stress-strain relation and Poisson effect of structural lightweight aggregate concrete
Source abstract
Abstract
Abstract Compared with the traditional concrete, the concrete fully made with the lightweight aggregate exhibits remarkable reduction in mechanical properties and is not suitable for the structural elements. To improve the performance of concrete, a hybrid aggregate system is usually used through partially substituting the natural crushed stone by the artificial lightweight aggregate. Using the expanded shale as the artificial lightweight aggregate, the stress-strain relation and Poisson effect of concrete were studied in the present study. Four different volume contents of shale aggregate were used in the experiment, and the effect of the volume content of shale on the mechanical properties of concrete was investigated. The reduction of peak stress and modulus of elasticity was observed with increase of the volume fraction of shale aggregate. However, the axial and lateral strains corresponding to the peak stress increase with the volume fraction of the shale aggregate. From the ratio of the lateral strain to the axial strain, a more significant Poisson effect was viewed for the concrete with higher content of the shale aggregate. Using the volume content of lightweight aggregate as the model parameter, a numerical formula was finally proposed to describe the stress-strain relation of lightweight concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. The greening of the concrete industry10.1016/j.cemconcomp.2008.12.010 ↗
2. Concrete with ceramic waste aggregate10.1016/j.cemconcomp.2005.04.003 ↗
3. Concrete made from ceramic industry waste Durability properties10.1016/j.conbuildmat.2010.11.049 ↗
4. Experimental investigation and development of analytical model forpre-peak stress–strain curve of structural lightweight aggregate concrete10.1016/j.conbuildmat.2012.06.041 ↗
5. Mechanical behavior of three generations of 100% repeated recycledcoarse aggregate concrete10.1016/j.conbuildmat.2014.05.010 ↗
6. Axial compressive behavior of FRP-confined lightweight aggregate concrete: An experimental study and stress-strain relation model10.1016/j.conbuildmat.2016.02.180 ↗
7. Experimental investigation of whole stress-strain curves of coralconcrete10.1016/j.conbuildmat.2016.06.064 ↗
8. Experimental study on strength and durability of lightweight aggregate concrete containing silica fume10.1016/j.conbuildmat.2016.03.165 ↗
9. Performance of concrete made with steel slag and waste glass10.1016/j.conbuildmat.2016.03.217 ↗
10. A comparison of strength and elastic properties between conventional and lightweight structural concretes designed with expanded clayaggregates10.1016/j.conbuildmat.2015.10.080 ↗
11. Characteristics of lightweight aggregates for high strength concrete
12. Approximate strength of lightweight aggregate using micromechanics method10.1016/S1065-7355(98)00002-9 ↗
13. Effects of aggregate properties on the strength and stiffness of lightweight concrete10.1016/S0958-9465(02)00020-3 ↗
14. Experimental investigation and development of analytical model for pre-peak stress–strain curve of structural lightweight aggregate concrete10.1016/j.conbuildmat.2012.06.041 ↗
15. Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2009.02.038 ↗
16. Chen · 1982
17. Behavior of prestressed concrete-filled steel tube (CFST) beam10.1016/j.engstruct.2016.04.050 ↗
18. A theoretical axial stress-strain model for circular concrete-filled-steel-tube columns10.1016/j.engstruct.2016.06.048 ↗
19. Axial compressive behavior of FRP-confined lightweight aggregate concrete: An experimental study and stress-strain relation model10.1016/j.conbuildmat.2016.02.180 ↗
20. Compressive behavior of FRP-confined concrete-filled PVC tubular columns10.1016/j.compstruct.2016.01.004 ↗
21. General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. Common Portland Cement (GB175-2007). Beijing, 2007.
22. Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Specification for mix proportion design of ordinary concrete (JGJ 55–2011). Beijing, 2011.
23. Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Standard for test method of mechanical properties on ordinary concrete (GB/T 50081–2002). Beijing, 2003.