Laboratory performance analysis of high percentage artificial RAP binder with WMA additives
Source abstract
Abstract
Abstract Warm mix asphalt (WMA) technology particularly involving high percentage of reclaimed asphalt pavement (RAP) has become more commonly used due to its promising advantages in environment, energy cost and workability. This paper focuses on the laboratory performance investigation of recycled binders containing high percentage artificial RAP binder (up to 70%) with incorporation of two types of WMA additives, i.e., polyethylene wax (R) and surfactant (M). The artificial RAP binder was obtained through rolling thin film oven (RTFO) and pressure aging vessel (PAV) aging to ensure its pure source and known properties. The rotational viscometer (RV), dynamic shear rheometer (DSR) and beam bending rheometer (BBR) tests were carried out on the recycled binders. The results indicated that when the percentage of the artificial RAP binder was up to 70%, the performance still satisfied the requirements of the Superpave binder specifications. In addition, both the artificial RAP binder content and the type of WMA additives played an important role in determining the performance of recycled binders with WMA additives. Typically, the WMA additive R and artificial RAP binder could offset the disadvantages of each other in rutting and fatigue resistance respectively. Moreover, most of the test results exhibited obvious linear or exponential trends with the artificial RAP binder content. However, the increase of the artificial RAP binder content had little influence on the BBR test data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures10.1016/j.conbuildmat.2014.04.002 ↗
2. Laboratory investigation on residual strength of reclaimed asphalt mixture for cold mix recycling
3. Effects of RH-WMA additive on rheological properties of high amount reclaimed asphalt binders10.1016/j.conbuildmat.2016.03.182 ↗
4. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture10.1016/j.conbuildmat.2007.04.019 ↗
5. Laboratory investigation of cracking resistance of hot-mix asphalt field mixtures containing screened reclaimed asphalt pavement10.1061/(ASCE)MT.1943-5533.0000223 ↗
6. R. McDaniel, R.M. Anderson, Recommended Use of Reclaimed Asphalt Pavement in the Superpave Mix Design Method: Technician’s Manual, NCHRP Report 452, Transportation Research Board of the National Academies, 2001.
7. R.S. McDaniel, H. Soleymani, R.M. Anderson, P. Turner, R. Peterson, Recommended use of reclaimed asphalt pavement in the SuperPave™ mixture design method. NCHRP Final Report (9–12), TRB, National Research Council, Washington, DC, 2000.
8. Superpave evaluation of higher RAP contents using WMA technologies10.1016/j.conbuildmat.2016.03.024 ↗
9. National cooperative highway research program · 2008
10. Characterization of warm mix asphalt binders containing artificially long-term aged binders10.1016/j.conbuildmat.2008.11.005 ↗
11. Chemical and rheological analysis of modified bitumens blended with “artificial reclaimed bitumen”10.1016/j.conbuildmat.2014.03.047 ↗
12. A study to determine the degree of partial blending of reclaimed asphalt pavement (RAP) binder for high RAP hot mix asphalt10.1016/j.conbuildmat.2010.06.045 ↗
13. Development of blending chart for different degrees of blending of RAP binder and virgin binder10.1016/j.resconrec.2013.01.018 ↗
14. Effects of rejuvenating agents on superpave mixtures containing reclaimed asphalt pavement10.1061/(ASCE)0899-1561(2007)19:5(376) ↗
15. Rheological, microscopic, and chemical characterization of the rejuvenating effect on asphalt binders10.1016/j.fuel.2014.06.038 ↗
16. Evaluation of different recycling agents for restoring aged asphalt binder and performance of 100% recycled asphalt10.1617/s11527-014-0332-5 ↗
17. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures10.1016/j.jclepro.2012.09.047 ↗
18. Using warm-mix asphalt technology to incorporate high percentage of reclaimed asphalt pavement material in asphalt mixtures10.3141/2051-09 ↗
19. Rheological characteristics investigation of high percentage RAP binders with WMA technology at various aging states10.1016/j.conbuildmat.2015.08.114 ↗
20. Binder design of high RAP content hot and warm asphalt mixture wearing courses10.1080/14680629.2015.1029707 ↗
21. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP10.1016/j.conbuildmat.2012.02.095 ↗
22. Refining laboratory procedure for artificial RAP: a comparative study10.1016/j.conbuildmat.2013.11.003 ↗
23. American association of state highway and transportation officials (AASHTO), Standard method of test for effect of heat and air on a moving film of asphalt (rolling thin-film oven test), AASHTO T 240–13, Washington, DC, 2013.
24. American association of state highway and transportation officials (AASHTO), Standard practice for accelerate aging of asphalt binder using a pressurized aging vessel (PAV), AASHTO R28, Washington, DC, 2012.
25. American association of state highway and transportation officials (AASHTO), Standard method of test for viscosity determination of asphalt binder using rotational viscometer, AASHTO T 316–13, Washington, DC, 2013.
26. Rheological properties, low-temperature cracking resistance, and optical performance of exfoliated graphite nanoplatelets modified asphalt binder10.1016/j.conbuildmat.2016.03.152 ↗
27. American association of state highway and transportation officials (AASHTO), Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR), AASHTO T 315–12, Washington, DC, 2012.
28. American association of state highway and transportation officials (AASHTO), Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR), AASHTO T 313–12, Washington, DC, 2012.
29. Anti-cracking indices of asphalt with different aging degree at low temperature
30. The Asphalt Institute. Performance graded asphalt binder specification and testing, SP-1. The Asphalt Institute, Lexington, [KY2003].
31. ASTM International · 2010