journal article·2017-09

Combined effects of sustained tensile loading and elevated temperatures on the mechanical properties of pultruded BFRP plates

Zhongyu Lu, Guijun Xian

Publisher page

Abstract

Abstract Fiber reinforced polymer (FRP) composites have to face harsh environments and service loading conditions during practical use, causing their mechanical properties to degrade. Mitigating this degradation is critical for the safe design and application of FRP composites. In the present paper, the combined effects of sustained tensile loading and elevated temperatures on the mechanical properties of a pultruded basalt FRP (BFRP) plate were studied. The examined tensile stresses were set at 35%, 50% and 65% of its ultimate tensile strength (fu), and the exposure temperatures were room temperature, 80 °C, 120 °C and 160 °C. Strain was recorded during testing, and variations of the tensile and interlaminar shear (ILSS) properties were studied. The tensile strain evolution of BFRP specimens during sustained tensile loading depended largely on the exposure temperature due to the temperature sensitivity of the epoxy resin. As the exposure temperature increased above the glass transition temperature (Tg) of the composites (123.7 °C), a remarkable increase in strain was observed. Meanwhile, the residual tensile strength and tensile modulus decreased with the exposure temperature and sustained tensile loading level. The tensile strength and tensile modulus decreased by 41.8% and 30%, respectively, for the specimens exposed at 160 °C and 50% fu. Sustained tensile loading led to stress redistribution in BFRP specimens especially at elevated temperatures, leading to serious degradation of the interlaminar shear strength (ILSS). Dynamic mechanical thermal analysis was performed to investigate the interface damage. An equation for predicting the tensile strength retention of BFRP plates under elevated temperatures was also proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Mechanical Behavior of Composites · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates10.1016/j.matdes.2014.10.038 ↗
2. Experimental study of bond-slip of GFRP bars in concrete under sustained loads10.1016/j.compositesb.2015.01.006 ↗
3. Effects of sea water environment on glass fiber reinforced plastic materials used for marine civil engineering constructions10.1016/j.matdes.2014.10.032 ↗
4. Flexural behaviour of partially bonded carbon fibre reinforced polymers strengthened concrete beams: Application to fire protection systems design10.1016/j.matdes.2014.10.053 ↗
5. Effects of elevated temperature on the shear response of PET and PUR foams used in composite sandwich panels10.1016/j.conbuildmat.2014.11.053 ↗
6. Effect of elevated temperatures on the mechanical behavior of basalt textile reinforced refractory concrete10.1016/j.matdes.2014.08.060 ↗
7. Effects of temperature and loading speed on interface-dominated strength in fibre/polymer composites: An evaluation for in-situ environment10.1016/j.matdes.2014.09.053 ↗
8. Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures10.1016/j.engstruct.2011.03.006 ↗
9. Effects of elevated temperature on near surface mounted and externally bonded FRP strengthening systems for concrete10.1016/j.cemconcomp.2012.10.003 ↗
10. Simple method for predicting temperatures in insulated, FRP-strengthened RC members exposed to a standard fire10.1061/(ASCE)CC.1943-5614.0000566 ↗
11. Performance in fire of FRP-strengthened and insulated reinforced concrete columns10.1016/j.firesaf.2012.08.006 ↗
12. Effects of exposure to elevated temperatures and subsequent immersion in water or alkaline solution on the mechanical properties of pultruded BFRP plates10.1016/j.compositesb.2015.03.066 ↗
13. Influence of elevated temperature on the mechanical and thermal performance of BFRP Rebar
14. Experimental study on the fire resistance of RC beams strengthened with near-surface-mounted high-Tg BFRP bars10.1016/j.compositesb.2014.01.011 ↗
15. Strengthening of RC beams using prestressed fiber reinforced polymers – A review10.1016/j.conbuildmat.2015.02.051 ↗
16. Durability of basalt fibers and composites in corrosive environments10.1177/0021998314526628 ↗
17. Damping properties of FRP cables for long-span cable-stayed bridges10.1617/s11527-015-0678-3 ↗
18. Creep rupture of a GFRP composite at elevated temperatures10.1016/S0045-7949(99)00176-5 ↗
19. Creep behavior of adhesives used for external FRP strengthening of RC structures10.1016/j.conbuildmat.2010.01.002 ↗
20. Evaluation of prestressed basalt fiber and hybrid fiber reinforced polymer tendons under marine environment10.1016/j.matdes.2014.07.064 ↗
21. Bond Behavior between basalt fiber-reinforced polymer sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load10.1061/(ASCE)CC.1943-5614.0000349 ↗
22. Curing effects on steel/CFRP double strap joints under combined mechanical load, temperature and humidity10.1016/j.conbuildmat.2012.11.035 ↗
23. Environmental resistance and mechanical performance of basalt and glass fibers10.1016/j.msea.2010.04.021 ↗
24. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete10.1016/j.matdes.2014.01.056 ↗
25. Carlsson · 2014
26. ISO 899-1. Plastics - Determination of creep behaviour – Part 1: Tensile creep, 2003.
27. American Society for Testing and Materials · Standard test method for tensile properties of polymer matrix composite materials. · 2000 · 1
28. American Society for Testing and Materials. Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates, United States, 2006, pp. 1–8.
29. Creep behavior enhancement of a basalt fiber-reinforced polymer tendon10.1016/j.conbuildmat.2015.07.118 ↗
30. Creep phenomena in FRP materials10.1016/j.mechrescom.2012.03.010 ↗
31. Effects of thermal aging on the water uptake behavior of pultruded BFRP plates10.1016/j.polymdegradstab.2014.09.003 ↗
32. Independent environmental effects on durability of fiber-reinforced polymer wraps in civil applications: A review10.1016/j.conbuildmat.2013.06.077 ↗
33. Chemical durability and mechanical properties of alkali-proof basalt fiber and its reinforced epoxy composites10.1177/0731684407084119 ↗
34. Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite10.1016/j.matdes.2012.12.001 ↗
35. Matrix crack propagation criteria for model short-carbon fibre/epoxy composites10.1016/S0266-3538(00)00167-6 ↗
36. Dynamic mechanical analysis of particulate-filled epoxy resin10.1002/app.11678 ↗
37. Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials10.1002/pc.750140508 ↗