journal article·2017-10

Practical issues related to the application of piezoelectric based wave propagation technique in monitoring of concrete curing

Yee Yan Lim, Kok Zee Kwong, Willey Yun Hsien Liew, Chee Kiong Soh

Publisher page

Abstract

Abstract Smart piezoelectric material, namely, the Lead Zirconate Titanate (PZT) has recently found its application in concrete curing and strength development monitoring using the wave propagation (WP) technique. Real-life application of this technique is sometimes questioned as various practical issues have not been attended. In this paper, a series of experimental studies are performed to investigate a range of practical issues related to the application of this technique, in an attempt to reduce the gap between laboratory studies and real-life applications. Issues such as the consistency of wave velocities and repeatability of the sensor’s electrical signatures, the optimum frequency of actuation, the effect of PZT transducer’s spacing and sizes, the waveform of actuation signatures, the effect of input voltage amplification, the effect of different surface roughness, the environmental effect and the effect of different types of coarse aggregates are experimentally studied. Results showed that 5-peaks sinusoidal tone burst actuated at 30 kHz or 120 kHz are preferred input voltage. Spacing of transducers should be approximately 90 mm. Smooth and even surface of the host structure is preferred for bonding. The WP technique is found to be reliable and its performance is consistent across different specimens up to a period of 365 days. It is also capable of differentiating the strength concrete with different types of coarse aggregate. Studies conducted in this paper provide basic understanding into various practical issues, which is expected to serve as guidelines to future development, design, optimization and commercialization of a more effective PZT based WP technique in monitoring of concrete curing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Application of electromechanical impedance technique for engineering structures: review and future issues10.1177/1045389X09352816 ↗
2. Correlation between Schmidt Hammer and destructive compressions testing for concrete in existing buildings
3. Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete10.1016/j.cemconres.2004.04.017 ↗
4. Practical issues related to application of electromechanical impedance-based method in concrete structural health monitoring
5. Giurgiutiu · 2007
6. V. Giurgiutiu, J. Bao, W. Zhao, Active sensor wave propagation health monitoring of beam and plate structures. in: SPIE's 8th Annual International Symposium on Smart Structures and Materials, (2001) 234–245.10.1117/12.436535 ↗
7. V. Giurgiutiu, B. Lin, J. Bost, Durability and survivability of piezoelectric wafer active sensors for structural health monitoring using the electromechanical impedance technique. in: Proc. IMECE 2004, ASME Int. Mechanical Engineering Congr., Anaheim, CA, Nov. 2004.10.1115/IMECE2004-60929 ↗
8. Concrete early-age strength monitoring using embedded piezoelectric transducers10.1088/0964-1726/15/6/038 ↗
9. Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I Diagnosis10.1088/0964-1726/13/3/020 ↗
10. Assessment of temperature effect in structural health monitoring with piezoelectric wafer active sensors10.12989/sss.2015.16.5.835 ↗
11. Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates10.1088/0964-1726/22/8/085025 ↗
12. K.Z. Kwong, Y.Y. Lim, W.Y.H. Liew, Non-destructive concrete strength evaluation using PZT based surface wave propagation technique – A comparative study. in: 3rd International Conference on Civil and Environmental Engineering for Sustainability, Melaka, Malaysia, (2015).10.1051/matecconf/20164702014 ↗
13. Structural identification and damage diagnosis using self-sensing piezo-impedance transducer10.1088/0964-1726/15/4/012 ↗
14. Non-destructive concrete strength evaluation using smart piezoelectric transducer — a comparative study10.1088/0964-1726/25/8/085021 ↗
15. On the study of concrete hydration process using piezoelectric based surface wave propagation technique
16. Fatigue life estimation of a 1D aluminum beam under mode-I loading using the electromechanical impedance technique10.1088/0964-1726/20/12/125001 ↗
17. Effect of varying axial load under fixed boundary condition on admittance signatures of electromechanical impedance technique10.1177/1045389X12437888 ↗
18. Damage detection and characterization of EMI technique under varying axial load10.12989/sss.2013.11.4.349 ↗
19. Durability and survivability of piezoelectric wafer active sensors on metallic structure10.2514/1.44776 ↗
20. Guided waves for damage detection in rebar-reinforced concrete beams10.1016/j.conbuildmat.2013.05.016 ↗
21. Bonding piezoelectric wafers for application in structural health monitoring-adhesive selection10.1080/09349847.2014.934575 ↗
22. Ceramic · 2016
23. Effect of adhesive on the performance of piezoelectric elements used to monitor structural health10.1016/j.ijadhadh.2005.10.002 ↗
24. Piezoelectric sensor based non-destructive active monitoring of strength gain in concrete10.1088/0964-1726/17/5/055002 ↗
25. Improved Rayleigh wave velocity measurement for nondestructive early-age concrete monitoring10.1080/09349840601128762 ↗
26. Calibration of piezo-impedance transducers for strength prediction and damage assessment of concrete10.1088/0964-1726/14/4/026 ↗
27. Smart aggregates: multi-functional sensors for concrete structures-a tutorial and a review10.1088/0964-1726/17/3/033001 ↗
28. On the study of surface wave propagation in concrete structures using a piezoelectric actuator/sensor system10.1088/0964-1726/17/5/055024 ↗
29. Application of low-profile piezoceramic transducers for health monitoring of concrete structures10.1016/j.ndteint.2008.06.007 ↗
30. Characterization of cement based materials using a reusable piezoelectric impedance based sensor10.1088/0964-1726/20/8/085023 ↗
31. Experimental study on damage detection in timber specimens based on an electromechanical impedance technique and RMSD-based mahalanobis distance10.3390/s16101765 ↗
32. Debond detection using embedded piezoelectric elements in reinforced concrete structures—part I: experiment10.1177/1475921706057978 ↗
33. Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures10.1016/j.conbuildmat.2014.11.067 ↗
34. Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: I. Experiment10.1088/0964-1726/17/3/035008 ↗
35. Yu · 2006
36. J. Carette, C. Dumoulin, G. Karaiskos, S. Staquet, A. Deraemaeker, Monitoring of the E-modulus in early age concrete since setting time with embedded piezoelectric transducers. in: Proc. 14th Int. Conf. and Exhibition: Structural Faults and Repair, Edinburgh, UK, 3–5 July 2012.