Mechanical and thermal properties of graphene sulfonate nanosheet reinforced sacrificial concrete at elevated temperatures
Source abstract
Abstract
Progress in the field of nanomaterials presents an opportunity to improve the performance of cementitious composites via graphene or its derivatives. This paper presents an experimental study on mechanical and thermal properties of sacrificial concrete without and with graphene sulfonate nanosheets (GSNSs) during high temperature exposure. The microstructure, porosity, mechanical strengths, thermal analysis, coefficient of thermal expansion, thermal diffusivity and ablation behaviour of sacrificial concrete during exposure to various temperatures up to 1000 °C were comprehensively investigated. Two new experimental apparatuses were developed and used to measure mechanical strengths of sacrificial concrete at elevated temperatures. It was found that the compressive strength, splitting tensile strength, thermal diffusivity and decomposition enthalpy of sacrificial concrete were increased by 12.98–25.36%, 8.66–34.38%, 25.00–103.23% and 4.23% respectively when adding 0.1 wt% GSNSs, while the porosity and ablation velocity of sacrificial concrete were reduced by 3.01–6.99% and 4.14% respectively due to the incorporation of GSNSs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Advanced ceramic materials synthesis · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Microstructure of lime and lime-pozzolana pastes with nanosilica10.1016/j.cemconres.2016.02.004 ↗
2. Investigating the effect of the cement paste and transition zone on strength development of concrete containing nanosilica and silica fume10.1016/j.matdes.2015.03.024 ↗
3. Effects of colloidal nanoSiO2 on fly ash hydration10.1016/j.cemconcomp.2012.06.013 ↗
4. Effect of nano-TiO2 on the mechanical properties of cement mortar10.1016/j.conbuildmat.2011.10.047 ↗
5. Polypropylene fibre reinforced cement mortars containing rice husk ash and nano-alumina10.1016/j.conbuildmat.2016.02.124 ↗
6. The effects of nano-silica and nano- alumina of frost resistance of normal concrete10.1016/j.conbuildmat.2013.07.088 ↗
7. Performance of Portland cement concretes with 1% nano-Fe3O4 addition: electrochemical stability under chloride and sulfate environments10.1016/j.conbuildmat.2016.05.033 ↗
8. Investigation on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications10.1016/j.cemconcomp.2015.11.001 ↗
9. Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique10.1016/j.cemconres.2015.03.006 ↗
10. The effect of carbon nanotube dispersion on the dynamic characteristics of unidirectional hybrid composites: an experimental approach10.1016/j.compositesb.2017.04.003 ↗
11. Modification effects of colloidal nanoSiO2 on cement hydration and its gel property10.1016/j.compositesb.2012.05.056 ↗
12. Fabrication of polycarboxylate/graphene oxide nanosheet composites by copolymerization for reinforcing and toughening cement composites10.1016/j.cemconcomp.2015.11.007 ↗
13. Reactive molecular dynamics and experimental study of graphenecement composites: structure, dynamics and reinforcement mechanisms10.1016/j.carbon.2017.01.013 ↗
14. Two-dimensional gas of massless Dirac fermions in graphene10.1038/nature04233 ↗
15. Graphene based materials: past, present and future10.1016/j.pmatsci.2011.03.003 ↗
16. The rise of graphene10.1038/nmat1849 ↗
17. Graphene-based materials for electrochemical energy storage devices: opportunities and challenges10.1016/j.ensm.2015.10.002 ↗
18. Mechanical properties and microstructure of a graphene oxide-cement composite10.1016/j.cemconcomp.2015.02.001 ↗
19. A review of graphene and graphene oxide sponge: material synthesis and applications to energy and the environment10.1039/c3ee43385d ↗
20. Use of 2D graphene nanoplatelets (GNP) in cement composites for structural health evaluation10.1016/j.compositesb.2014.08.005 ↗
21. Graphene and graphene oxide: synthesis, properties, and applications10.1002/adma.201001068 ↗
22. Graphene oxide sheets at inerfaces10.1021/ja102777p ↗
23. Nanocomposite of cement/graphene oxide – impact on hydration kinetics and Young’s modulus10.1016/j.conbuildmat.2014.12.009 ↗
24. Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets10.1016/j.compositesb.2017.04.013 ↗
25. Influence of 2D rGO nanosheets on the properties of OPC paste10.1016/j.cemconcomp.2016.03.005 ↗
26. Mechanism of cement paste reinforced by graphene oxide/carbon nanotubes composites with enhanced mechanical properties10.1039/C5RA18602A ↗
27. The experimental study on the correlation of resistivity and damage for conductive concrete10.1016/j.cemconcomp.2015.12.005 ↗
28. Thermal behaviour of siliceous and ferro-siliceous sacrificial concrete subjected to elevated temperatures10.1016/j.matdes.2016.01.127 ↗
29. Konings · 2012
30. Residue strength, water absorption and pore size distributions of recycled aggregate concrete after exposure to elevated temperatures10.1016/j.cemconcomp.2014.06.001 ↗
31. Self-consolidating concrete subjected to high temperature mechanical and physicochemical properties10.1016/j.cemconres.2009.08.001 ↗
32. Thermo-mechanical behaviour of baritic concrete exposed to high temperature10.1016/j.cemconcomp.2014.07.009 ↗
33. Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures10.1016/j.cemconcomp.2007.06.003 ↗
34. Effect of transient creep on compressive strength of geopolymer concrete for elevated temperature exposure10.1016/j.cemconres.2013.11.014 ↗
35. Mechanical and physicochemical properties of ferro-siliceous concrete subjected to elevated temperatures10.1016/j.conbuildmat.2016.06.104 ↗
36. Effect of graphene sulfonate nanosheets on mechanical and thermal properties of sacrificial concrete during high temperature exposure10.1016/j.cemconcomp.2017.06.007 ↗
37. M.W. Chase, NIST-JANAF Thermochemical Tables, Journal of Physical and Chemical Reference Data, Monograph 9, fourth ed., Springer, Berlin, 1998.
38. Effects of test conditions and mixture proportions on behaviour of high-strength concrete exposed to high temperatures
39. The chunnel fire: chemoplastic softening in rapidly heated concrete
40. Functionalized graphene sheets for polymer nanocomposites10.1038/nnano.2008.96 ↗
41. The influence of thermal-stressing (up to °C) on the physical, mechanical, and chemical properties of siliceous-aggregate, high-strength concrete10.1016/j.conbuildmat.2013.01.020 ↗
42. Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature10.1016/j.conbuildmat.2010.11.064 ↗
43. Permeability and pore structure evolution of silicocalcareous and hematite high-strength concretes submitted to high temperatures
44. The mix design for self-compacting high performance concrete containing various mineral admixtures10.1016/j.matdes.2015.01.006 ↗
45. Mechanical, durability and microstructural characteristics of ultra-high-strength self-compacting concrete incorporating steel fibres10.1016/j.matdes.2009.04.024 ↗
46. Confined water dissociation in disordered silicate nanometer-channels at elevated temperatures: mechanism, dynamics and impact on substrates10.1021/acs.langmuir.6b00444 ↗
47. Comparison of compressive and splitting tensile strength of high-strength concrete with and without polypropylene fibres heated to high temperatures10.1016/j.firesaf.2009.07.001 ↗
48. Phase distribution and microstructural changes of self-compacting cement paste at elevated temperature10.1016/j.cemconres.2007.02.011 ↗
49. Bazant · 1996
50. Measurement of linear thermal expansion coefficient of alkali-activated aluminaosilicate composites up to 1000°C10.1016/j.cemconcomp.2009.02.002 ↗
51. Thermal expansion of self-consolidating normal and lightweight aggregate concrete at elevated temperature10.1016/j.conbuildmat.2009.04.004 ↗
52. Influence of the nature of aggregates on the behaviour of concrete subjected elevated temperature10.1016/j.cemconres.2011.01.005 ↗
53. Predicting concrete coefficient of thermal expansion with an improved micromechanical model10.1016/j.conbuildmat.2014.06.039 ↗