Multi-scale characterization of the effect of wax on intermolecular interactions in asphalt binder
Source abstract
Abstract
Abstract This paper investigates the effect of paraffinic wax (commonly found in bio-oils produced from bio-mass) on the properties of asphalt binder as a commonly used additive in warm mix asphalt technologies. A comprehensive series of laboratory experiments combined with computational analysis was performed on an asphalt binder doped with four different percentages (1%, 3%, 5%, and 10%) of paraffin wax. Differential scanning calorimetry was used to study the effect of wax on physical properties of asphalt binder. Furthermore, rheological characteristics and fracture energy of each wax-doped specimen at sub-zero temperatures was measured to study the effect of wax crystallization on asphalt binder properties. To study intermolecular interactions, molecular dynamics simulation was performed on the wax-asphaltene assembly to study molecular conformation and packing of asphaltene molecules in the presence of wax. The results of molecular simulations provided insights into underlying intermolecular interactions that control rheological behavior. This was further reflected in a reduction of self-association of asphaltene molecules; as the wax concentration increased, the average size of asphaltene aggregates reduced. However, the number of clusters of asphaltene increased as wax concentration increased from 1% to 10% in asphaltene matrix. Accordingly, simulations results combined with laboratory characterization contributed to the understanding of the effects of different concentrations of paraffin wax on asphalt rheological properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Petroleum Processing and Analysis · Enhanced Oil Recovery Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. ASTM D6373-15, Standard Specification for Performance Graded Asphalt Binder, West Conshohocken, PA, 2015.
2. ASTM D6723-12, Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT), ASTM International, West Conshohocken, PA, 2012.
3. ASTM E 1269, Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry, West Conshohocken, PA, ASTM International, 2005.
4. Composition of asphalt based on generic fractionation, using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization10.1021/ac60273a004 ↗
5. High temperature AFM study of CAP 30/45 pen grade bitumen10.1111/j.1365-2818.2009.03354.x ↗
6. Macrostructures of the asphaltic fractions by various instrumental methods10.1021/ac50157a057 ↗
7. Influence of asphaltene content on mechanical bitumen behavior: experimental investigation and micromechanical modeling10.1617/s11527-014-0383-7 ↗
8. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220—low temperature performance10.1016/j.fuel.2005.09.014 ↗
9. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220–high and medium temperature performance10.1016/j.conbuildmat.2006.07.012 ↗
10. The theory of the brownian movement10.1002/andp.19053220806 ↗
11. On the microstructure of bituminous binders10.1080/14680629.2013.837838 ↗
12. Wax content of bitumens and its composition
13. T.F. Headen, E.S. Boek, G. Jackson, T.S. Totton, E.A. Muller, Simulation of asphaltene aggregation through molecular dynamics: Insights and limitations, Energy Fuels (2017).10.1021/acs.energyfuels.6b02161 ↗
14. Impact of maltene and asphaltene fraction on mechanical behavior and microstructure of bitumen10.1617/s11527-015-0541-6 ↗
15. J.B. Król, K.J. Kowalski, P. Radziszewski, J. Piłat, M. Sarnowski, P. Świeżewski, Influence of WMA wax modifier melting point on bitumen viscosity, in: 5th European asphalt technology association conference-EATA, Braunschweig, 2013.
16. Rheological behaviour of n-alkane modified bitumen in aspect of Warm Mix Asphalt technology10.1016/j.conbuildmat.2015.06.033 ↗
17. The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification10.1016/j.cis.2008.08.011 ↗
18. Chemical compositions of improved model asphalt systems for molecular simulations10.1016/j.fuel.2013.07.012 ↗
19. X. Lu, B. Kalman, P. Redelius, A simple test method for determination of waxes in crude oils and bitumens, in: Proceedings of 4th Eurasphalt and Eurobitume Congress, Copenhagen, Denmark, 2008.
20. Molecular asphaltene models based on Clar sextet theory10.1039/C4RA05694A ↗
21. Petrophase 2009 panel discussion on standardization of petroleum fractions†10.1021/ef9009263 ↗
22. Rheological properties of asphalt binders with chemical tensoactive additives used in warm mix asphalts (WMAs)10.1016/j.conbuildmat.2011.10.010 ↗
23. The modified Yen model10.1021/ef900975e ↗
24. Asphaltene aggregation under vacuum at different temperatures by molecular dynamics10.1021/ef020226i ↗
25. Investigating molecular interactions and surface morphology of wax-doped asphaltenes10.1039/C5CP07180A ↗
26. Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy10.1080/10298436.2011.575942 ↗
27. Morphology, thermal analysis and rheology of Sasobit modified warm mix asphalt binders10.1016/j.fuel.2013.07.033 ↗
28. Melting of solvents nanoconfined by polymers and networks10.1002/polb.21015 ↗
29. Asphalt flocculation and deposition: I. The onset of precipitation10.1002/aic.690420104 ↗
30. Internal structure of bitumen/polymer/wax ternary mixtures for warm mix asphalts10.1002/app.39057 ↗
31. Warm mix asphalt: an overview10.1016/j.jclepro.2011.11.053 ↗
32. Asphalt formation and precipitation: Experimental studies and theoretical modelling10.2118/35707-PA ↗
33. Sustainable asphalt mixes: use of additives and recycled materials10.3846/bjrbe.2011.32 ↗
34. On the existence of wax-induced phase separation in bitumen10.1080/10298436.2010.488730 ↗
35. C.G. Slough, N.D. Hesse, High precision heat capacity measurements of metals by modulated DSC, in: Proc. NATAS Annu. Conf. Therm. Anal. Appl., vol. 34, 2006, pp. 160.
36. Laboratory evaluation of WMA mixture for use in airport pavement rehabilitation10.1016/j.conbuildmat.2008.12.011 ↗
37. An ab initio CFF93 all-atom force field for polycarbonates10.1021/ja00086a030 ↗
38. The Use of Warm Mix Asphalt. European Asphalt Pavement Association, EAPA position paper. http://www.eapa.org/ Accessed 07.01.11, July 2016.
39. Sensitivity of the aggregation behaviour of asphaltenes to molecular weight and structure using molecular dynamics10.1080/08927022.2013.850499 ↗
40. Analysis and evaluation of possibilities for the use of warm mix asphalt in Lithuania10.3846/1822-427X.2009.4.80-86 ↗
41. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
42. Laboratory evaluation of warm mix asphalt: a preliminary study
43. A comparative study of the influence of shift factor equations on master curve construction