Experimental investigation of flexural behavior of glulam beams reinforced with different bonding surface materials
Source abstract
Abstract
Abstract In this study, flexuralbehaviors of glue laminated timber beams manufactured from Pinussylvestristree were investigated by comparing the results with those of massive timber beams. The main variables considered in the study were number of laminations, types of adhesive materials and reinforcement nets used in the lamination surfaces. In scope of the experimental study, glue laminated beams with 5 and 3 lamination layers were manufactured with 90 x 90 mm beam sections. In the lamination process epoxy and polyurethane glue were used. Morever, in order to improve the bond strength at the lamination surface, aluminium, fiberglass and steel wire nets were used at the lamination surfaces. Load–displacement responses, ultimate capacities, ductility ratios, initial stiffness, energy dissipation capacities and failure mechanisms of glue laminated beams were compared with those of massive beams. It was observed that the general bending responses of glue laminated beams were better than those of massive beams. In addition to that the use of reinforcement nets at the lamination surfaces increased the ultimate load capacities of the tested beams. The highest ultimate load capacities were oberved from the tests of glue laminated beams manufactured using five laminated layers and retrofitted with polyurethane glue using steel wire reinforcement nets, in the direction normal to the lamination surface. Finally, the finite element simulations of some test specimens were performed to observe the accuracy of finite element technology in the estimation of ultimate capacities of glue laminated timber beams.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Wood Treatment and Properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. ANSYS Release 14.5 Documentation for ANSYS—Theory Reference for ANSYS and ANSYS Workbench, 2012, Canonsburg, PA.
2. Modelling of Glulam beams pre-stressed by compressed wood10.1016/j.compstruct.2017.01.028 ↗
3. Structural behaviour of glued laminated timber beams pre-stressed by compressed wood10.1016/j.conbuildmat.2011.10.002 ↗
4. Assessing the integrity of glued-laminated timber elements10.1016/j.conbuildmat.2015.06.064 ↗
5. Wood as a sustainable building material
6. Numerical modeling of the failure behavior of dowel connections in wood
7. Flexural behaviour of glulam timber beams reinforced with FRP cords10.1016/j.conbuildmat.2015.07.116 ↗
8. Characteristic bending strength of beech glulam10.1617/s11527-006-9117-9 ↗
9. M. Haiman, K. Pavković, B. Baljkas, Application of Glulam Beam Girders With External Pre-Stressing, WTCE, World Conference on Timber Engineering, 2010.
10. Analysis of composite beams bases on wood and reinforced fibers
11. Kermani · 1999 · 82
12. Study on flexural behaviour of glulam beams reinforced by Near Surface Mounted (NSM) CFRP laminates10.1016/j.conbuildmat.2015.04.050 ↗
13. D.M. Moses, H.G.L. Prion, Anisotropic plasticity and failure prediction in wood composites, Paper presentation for ANSYS Inc. Ninth International Conference and Exhibition, August 2000, 2000.
14. Moody · 1999
15. Nunnally · 2007 · 295
16. Modelling of experimental tests of wooden specimens from scots pine (Pinus sylvestris) with the help of anisotropic plasticity material model
17. FRP reinforcement of low-grade glulam timber bonded with wood adhesive10.1016/j.conbuildmat.2015.05.026 ↗
18. Nonlinear numerical modelling of FRP reinforced glued laminated timber10.1016/j.compositesb.2013.03.038 ↗
19. Bond between glulam and NSM CFRP laminates10.1016/j.conbuildmat.2012.09.089 ↗
20. Wood-based composite materials, panel products, glued-laminated timber, structural composite lumber, and wood–nonwood composite materials
21. Stalnaker · 1999
22. Experimental and numerical analyses of the structural response of adhesively reconstituted beech timber beams10.1016/j.compstruct.2014.08.013 ↗
23. Timber Engineering - General Introduction
24. A component method for moment-resistant glulam beam–column connections with glued-in steel rods10.1016/j.engstruct.2016.02.024 ↗
25. Prestressed glulam beams reinforced with CFRP bars10.1016/j.conbuildmat.2016.02.008 ↗